Question about 2003 Ford Escape

1 Answer

My daytime running lights on my 2003 Ford Escape are flashing but once I turn on my low beams or high, they stop. I have an after market command start. Could there be some problem with that?

Posted by on

  • orcaw1 Aug 02, 2010

    Nope...no check engine light came on!

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 162 Answers

Did any check light come on , when the engine start

let me know waht is what I will take you along from there

Posted on Aug 02, 2010

  • chitrabarma Aug 03, 2010

    why did you change the command start.? or that was the problem you was getting before you change the command start. will if not , then the commond start is your problem . i am just assisting some thing here.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi my name is Larry I have a 1998 Pontiac sunfire & my problem that I have is I have low beam. But no high beam.


It's probably the switch , but testing to know for sure is alwasy a good idea .

Headlamps Inoperative - High Beams
Step
Action
Value(s)
Yes
No
1
Did you perform the Daytime Running Lamps (DRL) System Check?
--
YES - Go to Step 2
NO - Go to Daytime Running Lights (DRL) System Check
2
Disconnect the turn/hazard headlamp switch connector C1.
Connect a fused jumper between terminal B of the turn/hazard headlamp switch assembly harness connector C1 and ground.
Do the high beam headlamps operate?
--
YES - Go to Step 3
NO - Go to Step 4
3
Replace the turn/hazard headlamp switch assembly.
Did you complete the repair?
--
Go to Daytime Running Lights (DRL) System Check
--
4
Repair the open in CKT 1200 between the turn/hazard headlamp switch assembly. Refer to Wiring Repairs in Wiring Systems.
Did you complete the repair?

Daytime Running Lights (DRL) System Check
Step
Action
Normal Result(s)
Abnormal Result(s)*
1
Turn the headlamp switch to the HEAD position.
Turn the headlamp dimmer switch to the LOW position.
The low beam headlamps are ON.
The high beam headlamps are OFF.
Headlamps Inoperative - Low Beams
2
Turn the headlamp switch to the HIGH position.
The high beam headlamps are ON.
The high beam indicator is ON.
The low beam headlamps are OFF.
Headlamps Inoperative - High Beams
3
Turn the headlamp switch OFF.
Turn the ignition to ON.
Disengage the parking brake.
The high beam headlamps come ON at a reduced intensity in approximately 30 seconds.
Daytime Running Lamps (DRL) Inoperative, Headlamp Switch Operates Normally
* Refer to the appropriate symptom diagnostic table for the applicable abnormal result.

Jan 13, 2017 | 1998 Pontiac Sunfire

1 Answer

I have a problem with the low beams on my headlights. The high beams works just fine. All of the other lights(turn signal, emergency lights, etc.) work except for the low beams.


Check the fuses first. then replace the turn signal switch if all fuses are good. All the lights run threw it, except the high brake light on the rear.

Jan 01, 2015 | 2003 Ford Escape

1 Answer

HEADLIGHTS WONT TURN OFF WITH SWITCH ON A 2002 FORD ESCAPE


Do they stay on with high and low beam? If high or low beam make a difference then you likely need a multi-function switch. If they stay on regardless of high or low beam your Daytime Running Light Module (DRL) may be faulty. It should be located on the rad support, ahead of the radiator. Once you located it, unplug it and see if your lights go out. If they do, replace the DRL. If they do not you likely need a headlight switch.

Jan 26, 2014 | 2003 Ford Escape

1 Answer

2003 ford escape the daytime running lights constantly flash until the headlights are turned on. And now the battery light is on.


The flashing could be caused by the alternator...that would explain why the battery light is on.

Feb 14, 2013 | 2003 Ford Escape

1 Answer

High beam and Daylight running lights dont work


Does the green daytime indicator flash when you shift into gear?
If so, one or both high beam bulbs are burned out.

Jan 09, 2012 | 2001 Saturn SL

1 Answer

I have a 2003 chevy cavalier. headlight issue


The blinking light is telling you that you have a headlight out, if you look the service light should be coming on when the light stops blinking.
Replace the head light and all should be fine.

Feb 23, 2010 | 2003 Chevrolet Cavalier

1 Answer

Alero: low beams as bright as Daytime runners while brights work?


Look for the relay for the head lights,it may be bad.Also look for a bad ground.And check the bulbs too.

Nov 04, 2009 | 2003 Oldsmobile Alero

1 Answer

1994 ford f-150 with day time running lights headlightnot working


Daytime Running Lamps
The daytime running lamp (DRL) system is designed to turn the high beam headlamps on, with a reduced light output, and without illuminating the high beam indicator lamp in the instrument panel. You have a DRL Module.
The multifunction switch is the stalk on your column.

This is 96 F150 circuit. Don't have 94.

51f651c.gif
Symptom Chart, Headlamps HEADLAMPS Condition Possible Source Action
  • Headlamps Inoperative
  • Circuitry open/shorted.
  • Damaged headlamp switch.
  • Blown fuse.
  • GO to Pinpoint Test A .
  • Headlamps On Continuously
  • Circuitry open/shorted.
  • Damaged headlamp switch.
  • GO to Pinpoint Test B .
  • High Beams or Low Beams Inoperative
  • Circuitry open/shorted.
  • Damaged multi-function switch.
  • GO to Pinpoint Test C .
  • One High Beam or One Low Beam Headlamp Inoperative
  • Circuitry open/shorted.
  • Damaged connector.
  • Headlamp bulb damaged.
  • GO to Pinpoint Test D .
  • Flash-to-Pass Inoperative
  • Blown fuse.
  • Circuitry open/shorted.
  • Damaged multi-function switch.
  • GO to Pinpoint Test E .



73d6d64.gif

Feb 25, 2009 | 1994 Ford F150 Styleside Supercab

1 Answer

2003 Ford Escape -- no low beams


First solution would be to check the fuses. Commonly, the low and high beams are on separate circuits. Dont forget the interior and under hood fuse boxes. Use your owners manual and the fuse cover to find the right one. In some cases, there is a separate fuse for each light, but I don't think this is the case here. Sounds like a fuse. If it is, replace it and if it goes again, take it to your Ford dealer, or a local mechanic.

Dec 18, 2008 | 2005 Ford Escape

Not finding what you are looking for?
2003 Ford Escape Logo

782 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...