Question about 2001 Chevrolet Venture

1 Answer

How do you replace oil pump in 2001 chevy venture van

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 462 Answers

The oil pan has to be removed to replace the pump.

Posted on Aug 02, 2010

  • craigmcdowel Aug 03, 2010

    I realized that but what esle is involved I was quoted 6.8 hours to re and re...that seems a bit much I was trying to figure out what was so involved to warrant that much time. Thanks

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace a Dorman Harmonic Balancer on a 2001 Chevy venture van


What is a Harmonic Balancer?
The Harmonic Balancer, or vibration damper, is a component connected directly to the front of the engine on the crankshaft. Its sole purpose is to reduce torsional vibrations created by the engine as the cylinders fire.

What causes Harmonic Balancer failure?
There are a variety of possible causes for balancer failure. Most common among these are heat stress, wear from road salt, oil leak, or ozone attacking the rubber components, damage inflicted by road debris, crankshaft failure, stress from integrated drive pulleys, and stress caused by loads from other devices such as power steering pump, AC compressor, alternator, air pump, and water pump.

Jul 18, 2015 | Cars & Trucks

1 Answer

2001 venter van Chev.radio come on no sound yes on star turn off for long time .


Check the fuse box for the radio, or check the wiring to the radio. Check this site for fuse box and fuse location in the box ...


Fuse Box Diagrams and Relays 2001 Chevy Venture

Feb 10, 2015 | 2001 Chevrolet Venture

1 Answer

Changed the head on a 2000 chevy venture and oil pump did oil change and now when ever we try to start van low oil presure light on and alarming help


Two things I can think of. did you prime the new oil pump?. If so the oil pump by pass valve may be stuck open.

Jun 01, 2014 | Cars & Trucks

1 Answer

Changed the head in a 2000 chevy venture as soon as van starts low oil presure light comes on. Did oil change and put in new oil pump still low oil light on. Help


Two things I can think of. did you prime the new oil pump?. If so the oil pump by pass valve may be stuck open. I often prime a pump with petroleum jelly as oil often leaks out .

Jun 01, 2014 | Cars & Trucks

1 Answer

My 2001 chevy venture van has a misfire as i drive what could be the problem


THESE VAN ARE KNOW FOR INTAKE GASKETS LEAKING INTERNALLY,CAUSING A MIS-FIRE. LOOK UNDER THROTTLE BODY AREA FOR COOLANT LAYING IN THE GULLY IF YOU SEE ANYTHING REPLACE INTAKE GASKETS FIRST. IF NOTHING IS LEAKING SPRAY SOME SOAPY WATER ON THE SPARK PLUG WIRES WHILE THE ENGINE IS RUNNING AND CHECK FOR ARCHING, IF ARCHING IS FOUND REPLACE THE PLUGS AND WIRES.

Dec 08, 2011 | 2001 Chevrolet Venture

1 Answer

Where is the oil pump located on my chevy venture 2000


the oil pump is located inside oil pan attached to engine.

Aug 14, 2011 | 2001 Chevrolet Venture

1 Answer

2001 chevy venture van and i cannot turn the key


While turning the key rotate the steering wheel left and right. If there is too much tension on the parking lock the key cannot be turned.

Feb 07, 2010 | 2001 Chevrolet Venture

1 Answer

I need a diagram of how to install an oil pump on a 1998 Chevy Venture Van, please.


kslib.info go to I'm looking for.....pick autorepair chilton. its free

Jan 16, 2010 | 1998 Chevrolet Venture Cargo

1 Answer

Overheating


If you are adding anti-freeze every time this happens, you are still loosing coolant some were. I assume there are no puddles on the garage floor or where you park the van? Check the oil dipstick and make sure the oil is not a "milky"color. Check the passenger side carpet for wetness, you may have to pull it back.
If all of that is OK, you are still burning the coolant by way of the intake gasket or head gasket.
Good luck, let me know.
Regards,

Mar 23, 2009 | 2001 Chevrolet Venture

2 Answers

2001 chevy venture oil sending unit


HI..
On a problem with oil pressure sensor leaking.
99% you need to replace the sensor with a new one.
Because if you can see the leak is not for the tread or gasket of the sensor.
If you can disconnect the the wire from the sensor.
and try to start you will see the leak coming from inside on the plastic, where the pins. of the sensor.

OK.. I hope this information work for you.
I work on Cars everyday.
Thank you fo use fixya.

Jul 13, 2008 | 2001 Chevrolet Venture

Not finding what you are looking for?
2001 Chevrolet Venture Logo

807 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...