Question about 1991 Geo Tracker

1 Answer

We can't get our 1991 GEO Tracker to start

We've put a new fuel pump in, new fuel filter, new fuel censor and it still doesn't run.

Posted by on

  • nodbbrown
    nodbbrown Mar 25, 2012

    mine does the same thing try this i know it sounds crazzy but as someone turns the engine over shake the truck back and forth mine started after i did this think maybe some thing blocking fuel pick up in tank

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 111 Answers

I had this problem as well. The tracker had sat for 8 years and would only run off of starter fluid. I replaced the filter and fuel pump then I had no fire. Located under driver side dash in the fuse panel theres a fuse for coil. I don't remember which one, but, I am pretty sure it is a 10 amp fuse. Or just do like I did and replace any bad fuses. If that doesn't work it will be a relay located above that same fuse box.

Posted on Sep 13, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1991 geo tracker starting probmers


does it crank at full speed. (called robust cranking)
headlamps work, full bright.
next is , is the dash cluster CEL lamp on key on? if not fuses are blown.
now crank, do you have spark to all cylinders?
no, fix spark.
yes, try test fuel?

http://www.fixkick.com/nostart.html

Aug 20, 2014 | 1991 Geo Tracker

1 Answer

91 geo tracker died while driving cant get it started again


when you crank it, do you smell fuel? if you do, you're getting fuel so try replacing the distributer cap and even the plugs. if no gas smell, the fuel filter needs changing or the fuel pump is bad.

Feb 27, 2014 | 1991 Geo Tracker

1 Answer

My 94 chevy pick up starts and files good but cuts out bad when put in gear and give gas


could be clogged fuel injectors or fuel filter could be plugged or your fuel pump is weak and needing replaced,what makes fuel pumps go bad in most vehichles is driving with less than a 1/4 tank of gas,it gets the fuel pump hot and works it too hard

Jan 19, 2013 | 1994 Chevrolet C1500

1 Answer

My 97 tahoe the rpm's start going funny engine startes running like its missing popping and ******* and die's it has new fuel pump ,sending unit ,rotor,cap.cam censor ,fuel relay everytime i c


I'm assuming you replaced the fuel filter when you did the pump.
You'll have to try to figure out if you are loosing fuel to the injectors or spark to the plugs to proceed.
Its possible something is failing inside the distributor among other things.
I'm also assuming you have checked the computer for trouble codes.

Dec 17, 2012 | 1997 Chevrolet Tahoe

2 Answers

I have ford f150 1989 4speed manual 5.0. It's jerks I can't fix it. I have put 2 new fuel pumps,did the whole tuneup, new tps censor, new erg valve, new ignition coil,and it's still jerks.


Did you check the fuel pump pressure before and after the pumps ?
You'll have to figureout if it is a fuel or ignition problem.Isthe check engine light on ?
Usually a "jerking" engine is an ignition problem.
You have a distributor and an ignition module that could be the problem too.

Jul 01, 2012 | 1991 Ford F150

1 Answer

How do you remove the round plastic ring that covers the fuel filter assembly on a 2003 Hyundai Elantra GL? It looks like it screws off but it's stiff and doesn't want to move. Help?


those cars have the filter as part of the fuel pump inside the tank,What you are describing is the lock ring for the fuel pump module that needs removed first then the module can be removed

Mar 25, 2017 | Hyundai Motor 2003 Elantra

1 Answer

If oil pressure sending unit is bad will it stop fuel pump from working on a 2000 blazer


You should never try a pump without it being in fuel. It uses fuel for lubrication when it is running. If the vehicle doesn't start at all when you first crank it over it is not the oil pressure sender. If you just put the pump in you might want to turn the key off and on several times to cycle the pump then try to start it. If it doesn't start then check fuel filter or check fuel pressure at fuel rail in engine compartment. Is fuel pump cycling at all when the key is turned on? There is a problem with ignition switches on some of these blazers.

Jan 04, 2012 | Chevrolet Cars & Trucks

Not finding what you are looking for?
1991 Geo Tracker Logo

402 people viewed this question

Ask a Question

Usually answered in minutes!

Top Geo Experts

yadayada
yadayada

Level 3 Expert

77169 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22258 Answers

Mike Gilbreath

Level 1 Expert

50 Answers

Are you a Geo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...