Related Tags:
This problem should be removed because:
Problem with Dodge 2001 Dakota
How to install Monroe sensa-trac shocks
How to install a set of 4 Monroe sensa-trac shocks on a 2001 dodge dakota 2 wheel drive V6. Any special tools required?
Solutions (1)
Best Solution
none at all just basic wrenches and sockets just did a set for my buddy i sprayed the bolts down a day ahead of time with wd40.
-
2000 Toyota Avalon Strut issue
I note that Monroe makes a Sensa-Trac strut that costs about $30 more each than their gas ones. Would you still recommend the gas ones?...
-
suspension creaks when going over bumps also a
suspension creaks when going over bumps also a poping noise when starting out driving.
-
can I replace my F55 struts with Monroe Sensa trac
can I replace my F55 magiride struts with Monroe Sensa trac and keep my air suspension in rear operational, and how would I mask the service...
-
I have a 1997 f150 XLT 4x4 and I need new shocks
I have a 1997 f150 XLT 4x4 and I need new shocks for the front and the back. I have been looking at the Monroe sensa trac load levelers for...
Add Your Solution
-
2001 dodge dakota rear brakes abs
I don't have front ABS. How can I tell if the rear are ABS?
-
I have a dodge 2001 dakota with a po442 code can i...
getting a po442 code can I fix it myself
-
2001 dodge dakota ac schematic
ac relay does not energize, tried jumping pressure switch, read the clutch coil it read good 35 ohms.
Fix-O-Meter
440
440 people viewed this problem
- 1 person found this problem to be helpful.
- 0 people are following this problem. Be the first!
Top Dodge Experts
Verification:
Please enter the characters below to complete your post
Can't read it? Try a different one
