Question about 1998 Chevrolet Lumina

1 Answer

How to flush a radiator in a 1998 chev lumina

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 130 Answers

Remove the coolant at the bottom drain valve, then remove the bottom radioator hose also the top radiator hose, make sure its park at the steet or curb. put a garden hose on the top radiator hose holding up with a rag around the hose and radiator hose so it wont leak the pressure. and just let the bottom empty all that **** out. i done this to so many cars to clean up all the built up between the guides. hope this helps you k!!!

Posted on Aug 01, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Is there a security switch on the ignition system on a 1997 chevy lumina.


Nope there is no switch like the "Valet" switch in after market alarms

Jan 31, 2011 | 1997 Chevrolet Lumina

1 Answer

Replaced speed sensor in 1998 chev. lumina ltz . now the check engine light won't go off.


check to see what the code it is first,then check the plug in to the sensor.











TIM..........

Oct 25, 2010 | 1997 Chevrolet Lumina

1 Answer

To change a radiator in a 1998 Chevy Lumina do you have to take off the engine brackets and pull it out the top or can it be done from underneath?


YOU HAVE TO UNBOLT SWING AWAY THE TOP ENGINE TORQUE STRUT MOUNTS FROM THE UPPER RADIATOR SUPPORT THEN.RADIATOR WILL COME OUT AT THE TOP.

Jun 17, 2010 | 1998 Chevrolet Lumina

1 Answer

What is the proper way to fill the engine coolant on a 92 Chev Lumina after you change the thermostat?


fill at radiator there are 2 bleeder screws 1 located on thermostat housing and 1 located to left at water pump housing. open when engine is warmed up to bleed air and refill radiater after engine cools.

Apr 22, 2010 | 1992 Chevrolet Lumina

1 Answer

98 chev 3.1L runs rough and dies at idle


Check the DIS module or injectors. Check to make sure you have a spark on each cylinder. One cylinder could be misfiring

Mar 05, 2010 | 1998 Chevrolet Lumina

2 Answers

Cant find fuse box 98 chev lumina car, tail lights off Thanks


open the PASSENGER FRONT DOOR and look on the side of dash

Dec 08, 2009 | 1998 Chevrolet Lumina

1 Answer

How are the spark plugs actually numbered in a 1998 chev. lumina


Looking from the front of the car, left side (drivers) the plug closest to you is #1
#2 is the closest to you on the right side.
#3 is the second on on the left
#4 is the second on on the right
#5 is the next on the left
#6 in the next on the right.

Jun 03, 2009 | 1998 Chevrolet Lumina

1 Answer

Intake gasket went bad on 1998 chevrolet lumina


There is None to my knowledge.. Ive done thousands of them.. Its way too hard to explain.. I did my first one by the seat of my pants.. only advice I can give is : Dont mix up the pushrods!! If ya do,, it'll warp valves bc the intake and exaust push rods are different lengths

Mar 11, 2009 | 1998 Chevrolet Lumina

2 Answers

How do i flush a radiator


go to auto parts store and get a flush kit,

cut and insert the "T" from the flush kit on the heater hose outlet or inlet.
make sure you are cutting into the heater hose coming out of the firewall heater area and not a large vacuum line.
if your not sure ask a mechanic.

connect the kits anti syphon to water hose and connect to the T you have installed ,
open the radiator , and flush very slow if engine is hot , or wait till engine is cool as a very cold flush can damage the engine.

Jun 18, 2008 | 1995 Chevrolet Lumina

Not finding what you are looking for?
1998 Chevrolet Lumina Logo

Related Topics:

590 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6924 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...