Question about 1998 Jeep Cherokee
Most times after you take it apart you will find that the linkage rod between the handle and the latch mechanism has fallen off, or the latch has rusted.
To get in there, the easiest way is to cut a three or four inch hole about nine inches from the bottom and just to the drivers side of center in the inner panel. Once you do that, you can see inside to pull up on the linkage rod. Inner panels are generally easy to find in local scrapyards and are not expensive. If the rod has fallen out of the clip, I generally squeeze some epoxy putty into the clip around the rod to hold it better.
There is a second way in but it requires some precision drilling.
Posted on Aug 01, 2010
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Oct 29, 2013 | 1998 Jeep Cherokee Grand 2WD
Apr 19, 2013 | 1998 Jeep Cherokee
Feb 09, 2013 | 1996 Jeep Grand Cherokee
Jul 19, 2010 | 1998 Jeep Grand Cherokee
Jun 04, 2009 | 1998 Jeep Grand Cherokee
Apr 29, 2009 | 1995 Jeep Cherokee
Apr 24, 2009 | 1998 Jeep Grand Cherokee
Nov 20, 2008 | 1998 Jeep Cherokee
Aug 06, 2016 | 1998 Jeep Cherokee
77 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: