At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Re: Need visual to find transmittion plug on 2002 Gand am
Their isnt one ,you have to drop the sump .best advice is if auto box is working leave well alone you shouldnt need to change the transmission oil ever
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Detail Instructions from the owner's manual
1. Turn off engine
2. Prepare transmitter by erasing all three of the factory default
channels by holding down the two outside buttons until the red light
begins to flash. Release both buttons.
3. Hold the end of your hand-held transmitter (garage door
remote) against the Homelink transmitter keeping the red light within
the Homelink icon in view.
4. Using both hands push the hand-held transmitter button and
the deisre button to be programmed on the Homelink transmitter. Do not
release the buttons at this time.
5. Hold down both buttons until the red light on the universal
transmitter flashes, first slowly then rapidly. When the light flashes
rapidly, release both buttons.
To program the remaining two buttons, follow steps 3-5.
The only way to program them is with a scan tool so you'll need to visit your local dealer to have it done. Here is how it is done.
Install a scan tool.
Use the scan tool in order to access programming: Vehicle Control System/Computer Integrating System/Module Setup/BCM/Program Key Fobs.
Press the START soft key on the scan tool.
Important: The scan tool must stay connected until all of the transmitters are programmed.
Press and hold the LOCK button and the UNLOCK button simultaneously on one transmitter. After a delay of 5-10 seconds, the scan tool will indicate that the transmitter is programmed.
Repeat the previous step in order to program up to 4 transmitters.
Remove the scan tool.
Operate the transmitter functions in order to verify correct system operation.
I woudnt reccomend a direct feed to your system unless it has a input on the stereo such as a aux in with an 1/8" plug. The other reccomended way is from an FM transmitter that plugs in to your Ipod and brodcasts it to your car stereo. They work great and you wouldnt know theye are not hard wired. Walmart, Radio Shack all have these transmitters. If your stereo does have an aux in with an 8th inch plug on it then simply go to radio shack and get a 1/8" male to 1/8th male stereo adapter and plug it in. Wiring the ipod without these two features will destroy both the ipod and car stereo as it creates a loop feedback against each other.
×