Question about 2001 Chevrolet Blazer

1 Answer

Big nut on the fan is stuck cant get it off a 2001 blazer im tring to change the water pump how do i get it off

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 183 Answers

I use a air hammer

Posted on Aug 01, 2010

  • empirep Jan 18, 2011

    most fan bolts are left hand thread.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2001 blazer hi clutch does the fan clutch come off the big nut


The big nut on the clutch unscrews from the pump. You'll need to get a chain strap wrench to hold the pulley or someway to hold the pulley, and a large wrench to loosen the nut.

May 28, 2010 | 2001 Chevrolet Blazer

1 Answer

Removing fan from water pump


there is a large nut that needs to be turned counter clockwise there pretty tite

Apr 03, 2010 | 2001 Dodge Ram 1500 Truck 2WD

1 Answer

On a 1999 dodge ram 1500 v8 5.2 the water pump how do i get the fan n fan cluch off im smart at cars but i cant seem t get it


you need to go get a fan clutch wrench at local parts store the big looking nut on the fan clutch has to com off firts befor you remove belt it turns counter clock wise

Apr 16, 2009 | Dodge Ram 1500 Cars & Trucks

1 Answer

Cooling Problem With My 97 S10 Blazer


Leave belt on, the fan clutch will loosen in the same direction that the fan turns while engine is running.There is a special wrench for these but, as a help to loosen it, with a heavy hammer and long chisel, place chisel blade near top of nut flat and strike firmly till it loosens in the direction the fan turns. This method is really not recommended as it is a shock load the water pump is not made for.Use care not to hit strait into shaft center. Before replacing fan blade, what caused fan to hit shroud?? Fix that so it don't happen again!Good luck! Freezing and thawing in Michigan!

Feb 08, 2009 | 1997 Chevrolet Blazer

1 Answer

How to change a water pump?


You will need to remove the upper fan shroud, remove the fan clutch that is threaded onto the water pump it is easiest to get the tool for this or you can use a bar between two of the pulley bolts and use a cresent wrench on the big nut. After you remove the fan clutch there is the small hoses on the top of the water pump and the lower hose on the bottom of pump. Then there are only four bolts holding the pump to the motor. Reinstall in reverse order. Let me know if you need more help.

Jan 06, 2009 | 1999 Chevrolet Blazer

1 Answer

I cant get my fan blade of to change can you tell me how?


There is only 1 great big tube nut on the inside of the fan blade assembly that needs to be loosened to remove it. U have to prevent the shaft its threaded onto from spinning though. The whole thing spins off that shaft on the water pump.

Jan 01, 2009 | 1997 Chevrolet Blazer

1 Answer

Fan removell


The big nut is part of the fan it threads on to the water pump. To remove loosen two of the pulley bolts put a pry bar between these two bolts the use a large wrench on the big nut to thread the fan off the pump. righty tighty, lefty loosey. They also make tools for removing the fan clutch.

Dec 16, 2008 | 2000 Chevrolet Blazer

1 Answer

2001chevy blazer


it is not to hard to change the pump but you will need a fan clutch tool. the water pump is on the front of the motor with the fan attached to it.

Dec 02, 2008 | 2001 Chevrolet Blazer

1 Answer

2000 Blazer 2D 4WD ZR2


The big nut spins counter clock wise. you have to put your pulley bolts back on and make sure they are tight. leave belt on so that you have more resistance to pull against when tring to loosen the nut put a bar inbetween the pulley bolts so it won't slip off and then loosen that big nut looking thing and you should have it from there. to the same thing in reverse order to install it

Jun 09, 2008 | 2000 Chevrolet Blazer

Not finding what you are looking for?
2001 Chevrolet Blazer Logo

Related Topics:

75 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...