Question about 2000 Chrysler Cirrus

1 Answer

2000 Chrysler cirrus: power locks will not work, fuse is ok, is there a relay somewhere? where can i get a wiring diagram?

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Master
  • 2,272 Answers

This Single Door Locking Wire controls both lock and unlock which means the pulse wires have to be connected to the same vehicle wire. The system is basically a resisted (+) 12V positive trigger system with lock command is a 3V pulse and the unlock is a 6V pulse.

Resist the (+)12V positive lock pulse of Chrysler Single Wire Door Lock/Unlock System Circuit through a 620 Ohms resistor and the unlock pulse with a 2.7 kOhms resistor
For wiring diagram click on the link directly
Check out.Thanks.

Posted on Aug 01, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

Where is the horn located on a 2000 Chrysler Cirrus? Want to unplug it

If you want to kill the horn, just pull the fuse. My database doesn't give the horn location. It should be in the front end, somewhere.

Apr 15, 2017 | Chrysler Cars & Trucks

1 Answer

Fuse layout for2000 chrysler. cirrus

You can look at that info. plus free wiring diagrams at Enter your vehicle info. Then under system click on power distribution ,then under sub system click on fuse panel . Then click on search , two blue links will pop up . Click on them one at a time . Then to see what each fuse powers ,under sub system click on power distribution .

Oct 01, 2016 | 2000 Chrysler Cirrus

1 Answer

My windshield washer doesn't work

Have you checked the fuse? Sounds like a blown fuse or you have a short in a wire maybe in the plug to the washer motor is worn, rusty, or the wires broken.

Aug 31, 2014 | 2000 Chrysler Cirrus

1 Answer

No reverse lights on 1995 chrysler cirrus

The red-blue wire is a direct link between the relay and the lights, there is nothing between the two components.
Is there power coming out of the relay for that wire ?
The b/w wire is power from the same fuse the shift selector switch is powered from. The red is power from the shift selector and the w/r is ground from the computer.

Jan 25, 2013 | 1995 Chrysler Cirrus

1 Answer

Horn not working

use a test light see if horn getting power,if test light flash when you press horn pad,more likely horn could be bad or hot wire horn see if it works,if no horn need replacing,if test light dont blink when you press horn pad you have blowed fuse or bad horn relay,if both fuse and relay of the horn pad bad have replace whole horn pad with airbag in the steering wheel.

Aug 30, 2012 | 2000 Chrysler Cirrus

1 Answer

My 2000 chrysler cirrus driver side window wont role down. does it require a fuze or a mechanic?

if was fuse no window would move- check to see if drivers door has a window lock switch first - if not-
have a mechanic see if power at motor and go from there

May 03, 2011 | 2000 Chrysler Cirrus

1 Answer

My 1998 Chrysler Cirrus LXi 2.5L 'Suddenly stopped', (Despite second fuel-pump, distrib, cam and crank-sensors (All 'under-hood' new fuses, (Incl. 'ASD relay/s ), Still, 'Won't deliver any 'spark', RUDE!...

ok we changed the crank sincere and still don't have any spark to my plug's and everyone is telling me different things checked the fuses and the fuel pump is working . it is a 1995 Chrysler cirrus lx 2.5 V6 please help

Apr 28, 2011 | 1998 Chrysler Cirrus

1 Answer

I need to find where the signal light flasher is on a Chrysler Cirrus 2000

under the hood there is a fuse box inside that fuse box, there is a square relay and it will click when it is working

Sep 23, 2010 | 2000 Chrysler Cirrus

1 Answer

Why does my 2000 Chrysler Cirrus blow the fuse for the brake lights every time I hook up the trailer ?

The wiring harness to the lights on the trailer might shorted somewhere. Trace the wires to the lights looking for a bare spot or chaffed area.

Jul 16, 2010 | 2000 Chrysler Cirrus

1 Answer


Either ASD relay in the fuse box in the front driver's side engine compartment or a burnt wire on the harness on the back of the motor going to the crankshaft position sensor.....
The relay can be swapped with one of the other relays because they are the same ones in the fuse box.

Oct 08, 2009 | 1996 Chrysler Cirrus

Not finding what you are looking for?
2000 Chrysler Cirrus Logo

Related Topics:

216 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts


Level 3 Expert

81400 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers


Level 3 Expert

814 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides