Question about 1993 Plymouth Voyager

1 Answer

1193 plymouth voyager. Brake lighs don't work

1193 plymouth voyager. Brake lighs don't work (third light in window does work) and turn signals don't work. Replaced bulbs, not change. What is the common point of failure?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Plymouth Master
  • 6,826 Answers

Maybe a relay or fuse is bad or the wiring to it.

But you said that the third brake light works.

So the brake switch must be ok.
Turn signals would be the flasher or wiring to it.1193 plymouth voyager.  Brake lighs don't work - prev.gif next.gif
CIRCUIT PROTECTION Fuse Block Fig. 1: The fuse box is located under a cover at the lower left instrument 1193 plymouth voyager. Brake lighs don't work - 85616099.jpg; 1987 Voyager shown 85616099.jpg
The fuse block and relay bank is located on the driver's side under the lower instrument panel. The fuse block contains fuses for various circuits as well as circuit breakers, horn relay, ignition lamp thermal time delay, and the turn signal flasher. The hazard warning flasher is mounted into a bracket below the fuse block. The individual fuse and relay locations can be found in the wiring diagrams at the end of this section.
is bad.

Posted on Aug 01, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hazard warning light don't work


Its possibe that ypou have independient FLASHER device, one for hazard and one for turn signal; check backside of fuse panel and replace it.

Aug 28, 2012 | 1993 Plymouth Voyager

1 Answer

Taillight won't burn but turn signal works. Wrong bulb?


Some vehicles use a double filament bulb, if one of the filaments is 'burnt' out then the turn signal would work but the running/brake light would not work.

Nov 28, 2011 | 1999 Plymouth Grand Voyager

1 Answer

I have a 1997 voyager. I just replaced the tail light bulbs including the brake light bulbs. the brake light switch was just replaced also. the left and right brake light do not work but the center one...


back to the brake light switch, power goes from the switch to the signal switch then to the taillights, the center light works on a different switch

Nov 17, 2010 | 1997 Plymouth Voyager

1 Answer

Brakes lights are not working.


The first thing to check is the brake switch(es) that are on the brake pedal lever, and the circuit for the third brake light is seperate from the normal brake lights.

If the brake light switch(es) and wiring do check out alright then the problem will most likely be in the turn-signal switch, and the brake lights are ran through the turn-signal switch.

Jun 07, 2010 | 1999 Plymouth Voyager

2 Answers

My 2000 Plymouth Voyager right turn signal won't work, i changed bulbs and it still didn't work, the brake and reverse lights work with those same bulbs


Check the bulb socket for corrosion. This is a rather common problem. You can clean up the socket contacts and it should work, or if it's corroded badly you can replace the socket itself.

Jul 13, 2009 | 2000 Plymouth Grand Voyager

1 Answer

Brake Light trouble!


the tail light lenses are most likley the problem. the sockets will also have to be replaced . try moving the backup light sockets to the brake light sockets . you should be able to get one working. this is for test purpos. at least you will know if it is the problem. good luck

Oct 24, 2008 | 1999 Plymouth Grand Voyager

1 Answer

1998 Plymouth Voyager 3.3


no spark

replaced coil
and brain

Jul 13, 2008 | 1998 Plymouth Grand Voyager

Not finding what you are looking for?
1993 Plymouth Voyager Logo

372 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

yadayada
yadayada

Level 3 Expert

77544 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8826 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...