Question about 1995 Dodge Ram

1 Answer

1995 doddge ram 2500 v 10 cold starting problems. Both fuel pump and asd relays clicking but get no spark or fuel to the engine until they stop and you can hear the fuel pump pulse as they click. Up till this the truck has been flawless even at 20 below. I've tried everything I know but got nowhere please help.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,857 Answers

Until you have actually tested components like the crankshaft sensor and the ignition module and the actual fuel pressure it anyones guess. Recommening a part without any data or testing informaation can get more expensive than if you just let a shop fix it for you. Go to mitchell1diy online if you don't know what to do and you have the ability and tools to diagnose this otherwise your most likley going to end up in the shop.

Posted on Aug 01, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Engine cranks good but will not start.


did you check all fuses with a meter ?
you are new to jeep repairs.... here are some facts.
jeeps have ASD relay.
when car dont start, see what the ASD relay is doing
do not throw parts, you picked the most hard and expensive thing to change on a lark. why do that?
the fuel pressure gauge is $20 and takes 5min to see that fuel pressure is good. not pulling the tank and pump. for fun.
why do that.? (seen 100000 times on forums, this....)
here is mr. ASD, and what to check.
the ASD can cut fuel and spark for many causes. x8

http://www.fixkick.com/Jeeps/ASD.html

automatic shut down relay.

does the relay close cranking? y/n ?
if yes, does it then drop out cranking, y/n?

those are the first 2 tests on all jeeps 1993 to now.

each check discovers what is wrong
so does attaching any OBD2 scan tool and cranking
for 5 long seconds and behold, DTC errors.
got DTC errors cranking/??

BINGO x10.

Feb 27, 2014 | 2006 Jeep Liberty

1 Answer

91 dodge ram 150 starts and quit some time starts and runs fine until i try to start it again dont matter cold or hot replaced fuel pump


There is a box under the hood next to the battery with fuses and relays.
there is a fuel pump relay and or Auto shut down relay that could be bad.
It shuts down the entire system ignition and or fuel pump.
ASD Relay.

May 21, 2011 | 1991 Dodge Ram 150

2 Answers

95 dodge intepid es 3.5 no spark changed coil crank and cam sesors. still no spark. help


are you able to have the engine code read? for free at any autozone or advance auto parts store? sounds exactly like you have a bad computer,located on the passenger side at the kick panel where your right foot would be if you're setting in the passenger side seat.!1st i would check your ecm fuse located under the hood in the main fuse box on the driverside fenderwell,all good? then move towards the computer. thank you for choosing fixya.com!

May 02, 2011 | 1995 Dodge Intrepid

1 Answer

Truck won't start cold, fuel pump relay and a.s.d relay clicking no fuel or spark. eventually when the clicking stops I hear the fuelpump run and with some difficulty I can start the engine. it runs pretty...


I would replace the A S D relay. it's located in the fuse box under the hood. It's inexpensive at the dealer. My ASD relay was acting up, and it wanted to bog down while driving, and sputter pulling away from a red light. once it finally goes, the vehicle won't start at all.

I hope this helps

Aug 06, 2010 | 1995 Dodge Ram 2500

1 Answer

1999 Dodge Ram 1500 cargo van will not start


If it cranks good but won't start, have a helper crank it while visually check for spark at the spark plugs. If spark everywhere, use a gage and check proper fuel pressure. Also, check fuel injector pulse.
If your missing several system, an example, at the ignition coil and fuel injectors, engine cranking, check the dark green wire with orange tracer for voltage? If no voltage that leads back to asd relay. I'm not saying the relay is faulty. Your computer has to see both the cam and crank sensor signals or it may not ground the asd relay. The asd relay supplies voltage to several systems.

Mar 12, 2017 | 1999 Dodge Ram

1 Answer

1995 Ram 1500. Just died? No votage to coil, no spark?


The power supplied to the fuel pump, ignition coil, fuel injectors and parts of the power module is controlled by the logic module through the Automatic Shutdown Relay (ASD):
The ASD relay is closed (allowing power to flow through it) when the ignition is first turned on. If the signal from the ignition reference is lost while the engine is running, the logic module cuts power to the ASD, which in turn removes power from the fuel pump,ignition coil, injectors and those parts of the power module.  This causes the engine to shut down.

Failure of the automatic shutdown relay is often shown as inexplicable stalling or refusal to start. The ASD can be triggered by a broken wire or short in another place, e.g. the fuel pump.  Hope this helps, and did you try to retrieve any DTC codes?? Be glad to help friend.

Jul 01, 2009 | 1995 Dodge Ram

2 Answers

Jeep won't start until a clicking sound comes from fuse box


The click you hear is the fuel pump relay. It gets its signal to energize from the PCM.If you have a faulty Crankshaft Position Sensor, the PCM will not work. Check for a bad fuel pump relay and also all of the other sensors: Camshaft Position Sensor, MAP Sensor, Idle air Control, Intake Air Sensor,etc.

Mar 21, 2009 | 1995 Jeep Cherokee

3 Answers

1998 Dodge Ram will not start -


check the asd relay in fuse box under hood look very close at contacts if replacing fuse does not fix wires in box may be burnt under neath

Dec 26, 2008 | 1998 Dodge Ram 1500 4WD

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

123 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...