Question about 2002 Toyota Land Cruiser

1 Answer

How to check transmission oil for toyota prado 5vz-fe 3400 cc

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 10,865 Answers

Automatic transmission is a very complicated device and its repair is costly. Most automatic transmissions must be checked with the engine running and warmed up. Also, make sure the car is on a level surface and fully warmed up.

If you not sure how to check the automatic transmission fluid, here is a step-by-step explanation:

Begin by letting the engine idle with the parking brake engaged and your foot on the brake.

Move the gear selector through each gear. This ensures that the fluid is circulating through the pumps, thereby providing you with an accurate reading.

Once you have done this, put the vehicle in park, but leave the brake engaged and the engine running.

The transmission dipstick is located near the rear of the engine. Pull the transmission dipstick out, wipe it clean with a rag, and note the markings on the end of the stick. The usual markings are “FULL” and “ADD 1 PINT”. Inset the dipstick fully and remove it again to take a reading.

If the engine is cool, it should be at the upper end of the “COLD” mark.

Posted on Aug 01, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the oil plug drain location on a 2012 Toyota Camry 3.5 liter engine


on the engine, did you even look? first, its always on the lowest point.
first learn the correct name for it, (makes google searching easy)
The 2GR-FE is a 3.5 L (3456 cc)
so lets do that, ill type for you.

and we find 700k hits. wow, really?

http://im1.shutterfly.com/media/47a1d611b3127ccefda8b9a923b800000060O08AbMWbVk0Ytge3nwg/cC/f%3D0/ps%3D50/r%3D0/rx%3D550/ry%3D400/

one more...

http://www.paulstravelpictures.com/Toyota-Sienna-2GR-FE-V6-Engine-Oil-Change-Guide/Toyota-Sienna-2GR-FE-V6-Engine-Oil-Change-Guide-006.html

1000s more but you can google like me.

or read the fsm FROM toyota
or at alldata.com, log in and read.

Dec 18, 2014 | Toyota Cars & Trucks

1 Answer

Hi I need the torque settings for both the cylinder head and the bottom end bearings for a 1997 Toyota Prado (3.4litre petrol). Thanks


1997 Toyota Prado 5VZ-FE
Cylinder head bolts:

Tighten the cylinder head bolts in criss cross manner inside out, in four stages as under:
Stage 1. Torque the bolts up to 17 Nm.
Stage 2. 34 Nm.
Stage 3. Rotate all the bolts 90 degrees.
Stage 4. Finally rotate all the bolts further 90 degrees.

Main Bearings:
Tighten the main bearing bolts in two stages, as under:
Stage 1. 61 Nm.
Stage 2. Rotate the bolts further 90 degrees.

Big end bearings:
Tighten the big end bolt of connecting rods in two stages as under:
Stage 1. 25 Nm.
Stage 2. Rotate the bolts further 90 degrees.

Feb 27, 2014 | Toyota Land Cruiser Cars & Trucks

1 Answer

Toyota 120 prado 2007 automatic. sounds like transmission whine at low speeds only.


why not, do the 50k mile tranny full flush with new filter, now.
maybe you can save it from doom.
check levels
check for not pink ATF, if brown , or black , change it now.
if full of metal dust, big cry.

Jan 18, 2014 | 2005 Toyota LandCruiser Prado

1 Answer

Need the firing order of a toyota avalon XLS 3.5 V6


HI WILL NEED AN ENGINE CODE TO BE CERTAIN
BUT SHOULD BE 1-2-3-4-5-6
IT SOUNDS DAFT BUT THAT IS FOR ENGINE CODES 5VZ-FE AND 1MZ-FE AND 3VZ-FE
ALL ARE V6 ENGINES WITH THE SAME FIRING ORDER CYLINDER NUMBERS ARE ARRANGED LIKE THIS 1 3 5
2 4 6
FRONT

Mar 02, 2011 | 2005 Toyota Avalon

1 Answer

I have a 1997 Toyota Prado (5VZ-FE) and I have lost the only master key I have to start the stupid thing...lol.....is there any way that I can bypass the immobiliser without having to spend upwards of...


well on some chevys with the vats system the key had a resister in it ...there were 12 diffrent resistences per model year ..i once ..on a 93 vette..figured the resisence needed and took a trip to radio shack and got the resisters needed and connected them together to aceve the needed resistane than located the two refrence wires going to the ecu and connected the wires ..via the resister i made and was able to run the car..if the toy uses a resistance type connection do some home work build the resistor and connect it than have a lock smith make a key that will turn the tumblers ...locksmith will run about 85-115 bucks

Feb 21, 2011 | 1997 Toyota Land Cruiser

1 Answer

Where is the thermostat in a 1995 toyota 4runner?


1995 Toyota Truck 4 Runner 3.0L EFI 6cyl

zjlimited_361.jpg

Fig. 1: On, 3VZ-E engines the thermostat is located in the waterpump (click over pic for zoom)

zjlimited_362.jpg

Fig. 2: Exploded view thermostat and housing on the 1FZ-FE engine


zjlimited_364.jpg

Fig. 3: Exploded view thermostat and housing on the 2RZ-FE and 3RZ-FE engines


zjlimited_363.jpg

Fig. 4: Exploded view thermostat and housing on the 5VZ-FE engine


Hope helps (remember to rate and comment this answer).

Dec 29, 2010 | 1995 Toyota 4Runner

1 Answer

Does my 2001 toyota prado 3ltr v6 have a timing belt or timing chain


I am pretty sure the Land Cruiser Prado 3.4 liter (3378cc) V6 5VZ-FE was a dual overhead cam that was chain driven.
But I have not actually ever seen or worked on one, since it was not common in the US.
In the US I believe it is sold as the Lexus GX, but with the larger V8.

The best way to tell is to simply look.
If it is chain driven, you will see no large cogged or toothed belt behind a shield, that goes all the way to the top of the engine.
If the cams are belt driven, you will.
Cam sprockets tend to be large and near the top of the engine.

Aug 10, 2010 | 2001 Toyota Land Cruiser

2 Answers

Lacks Power


Hi,

Make sure your silincer is not blocked or check air tintake.

Get back to me if I can assist.

Rhino

Jan 12, 2009 | 1997 Toyota Land Cruiser

Not finding what you are looking for?
2002 Toyota Land Cruiser Logo

2,537 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

Marvin
Marvin

Level 3 Expert

81400 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22359 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8841 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...