Question about 1996 Honda Accord

1 Answer

Help i have a broken wheel stud on the front wheel of a 1996 accord how do i replace

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Honda Master
  • 2,100 Answers

It is a fairly easy fix, sometimes, Most studs just knock right out the back, put in the new one and tighten it up. Some, not so easy, some you have to take off the spindle, some are clipped in, some threaded, so you need to find out what you have there before you start fixing. I would go to the auto parts store and ask for one and then ask how it goes in. They should be able to show you. Hope this helps.

Posted on Aug 01, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do you replace the front rotors on a 1996 honda accord?


Remove wheel. Take off outer driveshaft nut. Remove lower ball joint pinch bolt & separate ball joint from spindle. Pull rotor & spindle out & away to pull driveshaft outer splined end out of rotor center hub. Look on the back of the spindle for the 4 bolts that hold in the wheel bearing. Use a 12 point socket to remove the 4 bolts and remove wheel bearing from spindle (out towards the wheel stud side). Probably will have to use a air chisel to get it out. Once it's out undo the 4 bolts on the outer (wheel stud side) of the rotor and remove the rotor from the hub. Clean & lube the hole where the bearing was in the spindle & the inner face of the hub. MAKE SURE IT'S CLEAN otherwise you may get a pulsation on braking if theres a piece of rust or dirt between the rotor center & the hub face. Reverse procedure to install.

If the rear bolts don't come out then you will have to use a slide hammer to separate the bearing to replace the rotor and there is a very good chance you will need to replace the wheel bearing after you're done (noisy on road test).


Not the job to do at home, usually an easy 2-3 hours per side if things go bad (book time is 2.2 hrs per side). Use good quality rotors as you don't want to have to do it again because a cheap rotor gave you a pulsation.

May 28, 2010 | 1996 Honda Accord

1 Answer

How do replace my front wheel stud on a 1996 honda accord wagon?


need to take the tire off the use an impact wrench to pull of the big nut holding the cv axle on the vehicle then remove the rotor you will see the studs use a hammer to tap it out then tap in the new one.

Nov 04, 2009 | 1996 Honda Accord

2 Answers

Two left side front wheel studs nuts broken.


They are replaceable.
You can knock the broken studs out with a point chisel (wear safety glasses). Take the pieces and nut to an auto parts store in order to get the same nut size (don't want to use two tire tools/wrenches).

Sep 25, 2009 | 1996 Nissan Quest

1 Answer

1996 Honda accord doesn't know how to replace front wheel broken bolt?


Remove the spindle, take it to a shop with a press, have them press off the hub, replace the broken wheel stud and reinstall.

P.S. If it is a one piece like quite a few accords are, then you may need a bearing as well due to the breakage rate when they are removed.

Hope that helps.

also, 80 lbs/ft is plenty of torque for the lug nuts on any honda car.

Sep 09, 2009 | 1996 Honda Accord

2 Answers

Broken wheel studs on 1996 grand am se- passenger front


usually they are an assembly but when i get crazy and damage studs i raise and support both front wheels so i can turn them and slowly move the hub where you can fit teh stud in and use an open lugnut to tighten down it will pull the stud in (i use an air compressor for this)

Apr 28, 2009 | 1996 Pontiac Grand Am

1 Answer

Broke stud on front left side


Yes you can replace the broken wheel stud. The wheel studs are pressed into place, and a vise will work to press it out, and in. You will have to remove the wheel hub, and then use a deep well socket and a bolt or something smaller than the actual stud to remove it with a vise. To replace it, you will need to use the deep well socket on the thread side of the stud, and press the new one in with the vise.

I hope this helps you, and I wish you luck with your repair.

Apr 25, 2009 | 2003 Pontiac Sunfire

2 Answers

Broken wheel stud front left 1992 honda accord


Only if there is an Acsess Hole Directly Behind the STUD'S PUNCH THE Broken SHORT one OUT But there May Not Be Enough ROOM FOR the NEW LONG STUD to go in between the HUB & Rotor Check this FIRST If you see GOOD CLEARANCE TO GET The new STUD in Then just Drive the old one out , and Use A LARGER than Stud Nut Or Washers to Pull New Stud Threw some Before Putting Wheel on. Then Put Wheel on And Tighten Wheel , Retorque after a Few Hundred Miles.

Mar 29, 2009 | 1992 Honda Accord

1 Answer

Two Broken Wheel Studs on Front Driver's Side


It would be best to have the work carried out at a garage of your choice. A garage you have used before and trust to do a good job. Depending how long it takes to free the studs, will depend on the final price.

Nov 24, 2008 | 2000 Honda Accord

1 Answer

I have 2 broken wheel studs, front right wheel on a 2003 Accord?


counter clockwise as normal...studs are pressed into hub..need to remove remains and then press new studs in...good luck

Nov 19, 2008 | 2003 Honda Accord

2 Answers

1996 HONDA ACCORD HOW DO I REPLACE THE FRONT ROTORS


  1. the rotors are held on by the wheel mainly
  2. to replace remove wheel
  3. remove caliper
  4. if brake pad cage raps around rotor remove with 2 bolts from backside
  5. take big hammer and tap surface of rotor near wheel studs use care not to hit studs. one or two good smacks should break rotor free from rust

Nov 15, 2008 | 1996 Honda Accord

Not finding what you are looking for?
1996 Honda Accord Logo

144 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...