Question about GMC Sierra 1500

Open Question

Where is the switch/commutatuer interruptor located?

Posted by on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do you replace an switch/commutateur interruptor on a 1995 Buick Regal? Please help. We have it apart and can't remember how it goes back together.

A what ? commutateur interruptor It's a turn signal switch . Suggest you go buy a repair manual at the parts store ! $ 15.00 - 20

Aug 04, 2016 | Buick Cars & Trucks

1 Answer

Where do I find the switch interruptor on my 1995 ford ranger with a 2.3

You should be able to find one at your local auto repair store, or even a junk yard might have one you can get. I believe it's called a switch/commutateur Interruptor. Also you can try places like and

Sep 03, 2015 | Ford Cars & Trucks

1 Answer

How do you replace a duralast ps307 switch interruptor on a 2004 Santa Fe

That switch is basically a 'bolt' w/a metal connector for the wire. It's probably a 19mm or 3/4" (deep) socket or a wrench....but essentially it just needs to be unscrewed from the engine block. Something to watch out for is that it's not screwed into another mount that can also be my Subaru...sometimes they'll come out together. You'll want to ONLY unscrew the switch itself and not the mount, if applicable.

Go to Google type/past this in: hyundai santa fe oil pressure switch location

And click on the images tab. It'll show you where to find the switch. It might depend on whether you have the 4 or 6 cylinder engine.


May 28, 2014 | 2004 Hyundai Santa Fe

1 Answer

I'm trying to locate where the spotlight switch interruptor for 2004-2007 avalache

Well I don't think they come with a spotlight. but if your talking about the fog lights, it should be below the headlight switch or on the headlight switch. Check there and if not then let me know.

I’m happy to assist further over the phone at

May 26, 2014 | Cars & Trucks

1 Answer

Switch interruptor

If we are talking about a pressure switch, it usually is the low pressure cut-off switch. Before messing with this switch, verify what your Freon pressure is.
If the pressure is low, the low pressure switch may be fine and you need to add Freon and find out why the Freon escaped.
If you have high pressure, there is a second switch which cuts power to the compressor. Too much Freon will activate this switch.
Tip: You have both a high and low pressure switch. The proper amount of Freon will center the pressure and keep the compressor running more consistently.
Either pressure switch unscrews from the fitting and with a minimum of pressure can be removed from the lines and replaced. The housing should have shapes for wrenches.

May 12, 2013 | 1997 Ford Ranger SuperCab

1 Answer

Neutral safety switch location

should be under the dash attached to the clutch pedal.

Apr 23, 2013 | 1999 Nissan Frontier

1 Answer

How to remove commutatuer switch on 2003 dodge van

I think he is referring to the ignition switch. I think Switch Translates to French as commutator or interrupter. After removing the steering column covers, You will need toremove the lock cylinder. Once that is out of the way you will need to unplug the clock spring connector for the airbag. Than if you have tilt wheel you will need to remove the tilt lever. Non tilt wheel will have a bracket that needs to be removed. You will than be able to access the screws that hold the ignition switch in place.

I’m happy to assist further over the phone at

Sep 01, 2012 | Dodge Caravan Cars & Trucks

1 Answer

05, Convertible VW Beetle, The front drivers side window does'nt lower when I get out of the car and when I open the door the buzzer doe's not go off to alert me that I have left the lights or indicator on...

posiblemente tendras rota la cerradura lleva unos microinterruptores que se desgastan o el interruptor de lignicion para comprobar este interruptor enciende la radio y sacas la llave si no se apaga la radio es este interruptor

Jan 25, 2011 | 2005 Volkswagen New Beetle Convertible

1 Answer

Handbrake in VW Passat 2007 got Stuck

a very common fault is the switch,the calipers are not much better,they will be able to sort it for you but they are bad news for a modern car !!

Jan 19, 2009 | 2007 Volkswagen Passat Sedan

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

40 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts


Level 3 Expert

81400 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22359 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides