Question about 1992 Honda Accord

1 Answer

What does the main fuel relay look like to replace it went to checker and they gave me a relay and i can't match it under the dash with somthing next to the stering column.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

Accually it should be a square or rectangle module that is attached to a bracket mounted to the drivers side wall under the dash.Use a mirror and a flashlight to locate it.

Posted on Aug 01, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Will start but when apply fuel it chokes out and dies


Two common issues on these old Accords that no one ever mentions. First, replace the main relay (It's located in a tight spot under the driver's side of the dash behind the silver cruise control module). It's notorious for causing fuel starvation problems because over time the soldering on the connections on the relay crack when it's hot, and will make contact when it's cold. You can find videos on Youtube on where it's located and how to replace it. Just search "1990 Honda Accord main relay". Second, you don't need a scanner to diagnose an OBD1 system. There is a self diagnostic plug located on the passenger side near the kick panel below the dash. Google "1990 Honda Accord Self Diagnostic CEL Lights" to find out how to do it and get CEL codes and descriptions.

Apr 06, 2014 | 1990 Honda Accord

1 Answer

My 1995 saab 9000 is not getting power to the fuel pump the car has a new fuel pump fuel preasure regulator and filter now the pump won't kick in what coulld be wrong


You have a fuel pump relay,in the main fuse box under the dash,left hand it is listed as I right hand it is listed as F, check for power at the relay.

Apr 02, 2012 | 1995 Saab 9000

1 Answer

Car will not start...its not the starter...but acts like its not getting fuel


Try replacing the fuel pump main relay. My 90 accord had the same problem when the main relay went bad, it would take almost 10 tries to start. The Fuel pump main relay is located under under the dashboard on the far left side. The main relay is held in by a 10 or 12 mm bolt. It is small, grey, and says mitsuba main relay on it. replacing this should fix your starting problem. Also check all fuses.
Hope this helps
Matt

Jun 13, 2011 | 1990 Honda Accord

1 Answer

I replaced fuel pump but it still will not start sometimes


Check Fuel Pump relay under dash. It will be intermittent from time to time. I went through same problem, First I replaced fuel Pump, Then I found that the relay was the main problem with car.

Dec 27, 2010 | 1992 Honda Accord

1 Answer

Car cranks but dose not start, there is no power to distributator or fuel pump


I suspect the at this point, the main relay is defective. This relay controls power to fuel and spark circuits.

The PGM-FI Main Relay is actually comprised of two individual internal relays. When the ignition switch is initially turned ON , the Powertrain Control Module (PCM) supplies ground to the PGM-FI Main Relay. This ground triggers one of the PGM-FI internal relays that sends battery voltage to the fuel pump for two seconds to pressurize the fuel system.
When the engine is running the PCM supplies a continuous ground to the PGM-FI Main Relay. The supplied ground keeps the relay in the "closed" position providing electrical current to the fuel pump, keeping the fuel loop pressurized while the engine runs.
If the engine is not running with the ignition on, the PCM cuts the ground to the PGM-FI Main Relay, causing the relay to "open" and stop the electric current flow to the fuel pump. As mentioned previously, if the engine is not running, the PCM will only supply ground to the PGM-FI Main Relay for two seconds when the ignition switch is initially switched to the ON position.
The PGM-FI Main Relay also supplies electrical power to the Idle Air Control (IAC) Valve and to the fuel injectors.

TESTING


If the engine starts and continues to run, the PGM-FI Main Relay is working and does not need to be replaced.
  1. Locate and remove the relay.

On some models of the Civic and Civic del Sol it is located to the left of the steering column under the dash. Many later models position it either near the passenger right side kick panel under the dash or by the driver left side kick panel up under the dash.
  1. Attach the battery positive terminal to the No. 2 terminal.
  2. And the battery negative terminal to the No. 1 terminal.
  3. Check for continuity between terminal No. 5 and 4.
  4. If there is no continuity, replace the relay and retest

Aug 05, 2010 | Honda Civic Cars & Trucks

2 Answers

Won't start turns over, fuel filter and pump seem


You could have a bad main relay. Do a search for main relay issues on 88-91 Civics and you'll find that it's a common problem. It's located way up under the dash behing the hood release. It's a huge pain to replace but if you've got a little mechanical skill and a lot of patience it can be done.

Mar 04, 2010 | 1991 Honda Civic

3 Answers

No power to fuel pump 1987 honda prelude


fuel cut relay in drivers dash fuse box. it is located on back side of fuse box,remove and jump (at fuse box )terminal 1 and 2 where relay was removed from.you should then have power to fuel pump.if so repLACE RELAY

Jun 10, 2009 | 1987 Honda Prelude

1 Answer

Turn signal relay switch, 94 s10 chevy blazer


It's behind the dash panel just below the steering column. There are two relays for the fuel pump back there. Chande them both out.

May 27, 2009 | 1994 Chevrolet S-10 Blazer

Not finding what you are looking for?
1992 Honda Accord Logo

121 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...