Question about Lincoln Town Car

1 Answer

No tail lights and parking lights - Town Car Lincoln Cars & Trucks

Posted by on

  • jet42472 Jul 31, 2010

    I'll pick up a lighting module,it's the only thing that makes sense. I know it's not a bad ground because head lights, emergency lights, turn signals, brake lights and the third member lights work.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Lincoln Master
  • 6,826 Answers

Check the fuses,and then if they are ok,replace the headlight switch.This is what controls the lights you are asking about.

Posted on Jul 31, 2010

  • 8 more comments 
  • jet42472 Jul 31, 2010

    all ready did all that.

  • Ronny Bennett Sr.
    Ronny Bennett Sr. Jul 31, 2010

    This is the only thing that controls those lights,did you check the connector to the head light switch?There is a lighting module too,if the connector is fine then the lighting module would be the problem.

  • jet42472 Jul 31, 2010

    Checked every thing you said, I even replaced the head light switch. I didn't realize there is a lighting module.

  • Ronny Bennett Sr.
    Ronny Bennett Sr. Jul 31, 2010

    Yes,on a town car there is,but it could be anywhere,I will try and find out ok?

  • jet42472 Jul 31, 2010

    Ok, thank you.

  • Ronny Bennett Sr.
    Ronny Bennett Sr. Jul 31, 2010

    What year is it?

  • jet42472 Jul 31, 2010

    1999

  • Ronny Bennett Sr.
    Ronny Bennett Sr. Jul 31, 2010

    Most of them on 97 to 99 are to the right of the steering column,under the dash black and retangled with three plugs

  • jet42472 Jul 31, 2010

    Ok, thank you!

  • Ronny Bennett Sr.
    Ronny Bennett Sr. Jul 31, 2010

    you are wellcome please rate.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2006 grand vitara tail lights are out I checked the fuses and there good I did notice that my license plate light went out first and than my tail lights could that possibly be the problem?


USA car, non export is my answer and no trailer mods.
Not RENEGADE
no Canada DRL options, right?
are the FRONT PARKS OUT TOO????? my shoe drops.!

so putting in 1 new bulb not fix 1? easy huh>?
did you scan the PCM for errors, DTC errors>
this year has digital controls for that.
the tail lights are really parking lights and are on all 4 corners not just tail. so are they all dead.? and the cab illumination in cluster
in PARK dead?

the BCM puter, closes the park relay on your command(digital)
this feeds 2 fuses rear, 7 an 9 (for both ends of car !!!)
9right
7 left rear and license.
so if 7 and 9 are good then the relay is not closing or bad.?

so in a shop we check fuse 7 and 9 , live, with voltmeter
12vdc both sides, parks ON,
if not 12v the relay is bad or not ON.
so we scan to PCM to see if the BCM sees errors
like "lost park output"
or see CANbus comm errors.
causing the loss of the park command to BCM

BCM means body puter.

not complex but BCM most close the relay !!!
12volts across that coil, or there will be no parks.

25453770-z53v0bh0zacy3ra2sk1gfmgn-2-0.jpg BTW the word tail only works on 1920 fords, had only 1 tail light
the parking light run about 20 lamps all over car. and in front of car.
the front lamp marked tail would be ODD.
but I know what you mean.

Feb 20, 2015 | 2006 Suzuki Grand Vitara

2 Answers

I have a 2003 suzuki xl7 what causes the tail lights not to work when ive checked the bulbs and fuses and they are good


it can only be 3 things, blown fuse, (test them not gander)
open circuit or short circuit.
are you saying park running lights are dead, aka, TAIL.
are the park lights working up front, ? and on dash?
1st click of head light switch is park. that is dead,at all lamp inside and outside of car?
02 xl7 (usa car answers, we do, here, as it is a USA forum)

this car has a BCM, body brain.
and it runs most things, we scan it first to see if IT has issues.
called DTCs.
when you select TAIL, at switch this is a digital input to BCM
true (0v = true) signal tells BCM you want tail/ parks on.

it (BCM) then closes relay 23 (seen below) park/tail relay
if the fuse is not blown, then this relay glows the dash
Illumination lights (park dim) are yours glowing now.
yes the all that is good fuse to dash.
now out side car, lots of tail/park lamps, which dont glow, just rear?





541163b9-cbaa-4bea-a80d-dd14c2653f70.jpg

Feb 02, 2015 | Suzuki Cars & Trucks

3 Answers

Why the brake light works and tail light don't work Chevrolet avalanche 2003


they are dual filament bulbs so the tail light filament might have blown and not the stop light , replace the bulb to check

Jul 18, 2014 | 2003 Chevrolet Avalanche

1 Answer

No tail lights


no (park -tail-running lights) is dash parking lamps glowing?
check the tail fuse yet?
94 accord
this circuit is huge, park/tail, up to 20 lamps. are all dead>?
front park, side park, tail park and dash lamps all out.
this i the red-blk feed. all comments , USA, as lighting varies by country. (laws)
license plate light dead too????????? that too is park
there is NO RELAY.
the fuse 32 feeds the HL (head light) switch and in PARK posistion
it feeds 12vdc raw power to all 38 lamps. (side corning lamps,etc)
the license plate lamp is key, there are 2 lamps.
and both probably are not out.
so if they are good lamps and both tail lamps are good and fuse
then they must glow, if one lamp shorts as 1156 or the like love to do
then it blows the fuse. as does the trailer jack (option) .

so fuse 32 park/tail blown
or HL park switch bad, if all 20 odd lamps dead. and fuse holds.
that simple, and this cars wiring is very simple and nice.

Feb 26, 2014 | 1994 Honda Accord

1 Answer

Tail lights don't work and instrument panel won't light up on 2007 corolla


you blew a fuse. check fuses in both fuse boxes..
ahh yes, the IP cluster lamps are dad, but not the idiot warning lights
only the parking lights in the cluster are dead. right.?
and the park-tail, running lights and dash dim lights are all the same.
my guess three is a short on the TAIL fuse, the TAIL fuse blew
and took out: park-tail, running lights and dash dim lights are all the same.
it blew. most are marked tail even thought it runs side lamps and front parking lamps... TAIL is wrong, they are parking. lamps it truth.

Feb 05, 2014 | 2007 Toyota Corolla CE

1 Answer

No parking lights in back


parking, yes, tail ,park.
(the correct name is park toy calls them tail, tell me how a tail lamp works in front of car, this name is from 1920cars , that only had 1 or 2 tail lights. (fun history that, with funny names)

if actually park lamps. 1st click of head light? switch?
there are over 20 park lamps in car, inside and out.
side markeres, front park lamps
all dimmable lamps inside are park too. all dead>?
then the park relay is bad (tail/park) or fuse. blown.

Dec 31, 2013 | 2001 Toyota Sienna

1 Answer

Toyota previa 1995 tail light stays on


tail is park, so turn off the parking lights ,.there are 20+ lamps
inside and out for park/tail/dim dash lamps.
do you mean stop lights stuck on, id bet so. (parks out)
so replace or adjust the brake lamp switch.
see alldata.com for full facts on topic.

Nov 30, 2013 | Toyota Previa Cars & Trucks

1 Answer

Running light will not turn off


park-run -tail
the most complex lights on car, huge number of lamps in side and outside. are ALL 20 dead ,side lamps. license, park, tail, dash , dash dim lights, ALL ?
check the fuses. first. always for ever and ever, check them first.
maked TAIL , even the front parks are run of TAIL. oddly.
parking lamps is the better term.
TAIL is 1929 word back when they had just 1 lamp... EEEEKKKSSS

Sep 16, 2013 | 1995 Acura Integra Coupe

1 Answer

1991 Park avenue, Tail lights and license's plate light's stopped working turn signal's hazards and brake lights still functional. but no tail lights or license plate lights


Check for Power on your License Plate Light, more than likely you have lost GROUND

Turn Signals, Do the Front Work and the Back don't? If NONE then FLASHER FUSE

Apr 09, 2013 | 1991 Buick Park Avenue

1 Answer

95 riviera dash lights or tail lights dont work


You probably have an open/blown tail/park lamp fuse. The dash light fuse gets power from the tail/park lamp fuse, so when you can't see your dash lights, you'll get the vehicle looked at and find you have no park/tail lamps either. It's a safety feature because otherwise you may never know your running lights are not working.
Check your park/tail lamp fuse.

Oct 03, 2009 | 1995 Buick Riviera

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lincoln Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

fordexpert

Level 3 Expert

5520 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Lincoln Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...