Question about 1994 Honda Civic

1 Answer

How to replace lug studs - 1994 Honda Civic

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 834 Answers

You will need a special tool to press the lug studs in and out of the flange, or you can follow these directions;

First you will have to pound the broken lug stud(s) out of the wheel hub/flange, use a punch or a drift that is a little smaller in diameter than the lug stud, and be sure that you do not pound on the flange itself, then you will need a lug nut and about a half an inch thick of flat washers.

1. Insert the new lug stud through the wheel hub from behind so that the threaded end is facing out towards you and then put some grease on the threads.

2. Then slip the flat washers onto the lug stud followed by the lug nut, and run the lug nut down backwards with the flat end of the lug nut towards the flat washers to take up the slack and use plenty of grease on the threads.

3. Then using a breaker bar tighten the lug nut until it pulls the lug stud through the wheel hub and it is flush with the wheel hub.

Be sure that the amount of flat washers used will make up for any non-threaded part of the lug stud that might stick out past the wheel hub preventing the lug nut from pulling the lug stud all the way through the wheel hub, and basically you do not want the lug nut to run out of threads before it can pull the lug stud flush with the wheel hub.

Let me know if you require any further assistance.

Posted on Jul 31, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

A couple of my lug nuts are stripped out. Will new nuts fit tighter?


Yes they will but also check the threads on the lugs and replace if damaged.

May 03, 2015 | Cars & Trucks

1 Answer

My lug nuts busted how do i replace


LUG NUTS CAN BE REPLACED.TAKE ONE LUG NUT WITH YOU TO ANY AUTO PART STORES. AND THE SALES PERSON CAN FIND WHAT THREAD SIZE AND LUG NUT SIZE YOU NEED.NOW IF LUG NUT STUDS BREAK OR STRIP YOU CAN BUY A TOOL TO PRESS OUT STUDS FROM THE ROTORS.CHECK ALL AUTO PART STORES FOR THE STUD PRESS OUT TOOL.IF YOU DONT FIND ONE.SNAP ON TOOLS OR MAC TOOLS WILL HAVE THAT TOOL.

Dec 25, 2010 | 1991 Buick Riviera

1 Answer

I need to know what are the bolts are called that the lug nuts go on a vehicle? I thought that it was the rotor. Mine has stripped.


You require "lug studs" to be able to install a lug nut to secure the tire.

You will need a special tool to press the lug studs in and out of the flange, or you can follow these directions;

First you will have to pound the broken lug stud(s) out of the wheel hub, use a punch or a drift that is a little smaller in diameter than the lug stud, and be sure that you do not pound on the flange itself, then you will need a lug nut and about a half an inch thick of flat washers.

1. Insert the new lug stud through the wheel hub from behind so that the threaded end is facing out towards you and then put some grease on the threads.

2. Then slip the flat washers onto the lug stud followed by the lug nut, and run the lug nut down backwards with the flat end of the lug nut towards the flat washers to take up the slack and use plenty of grease on the threads.

3. Then using a breaker bar tighten the lug nut until it pulls the lug stud through the wheel hub and it is flush with the wheel hub.

Be sure that the amount of flat washers used will make up for any non-threaded part of the lug stud that might stick out past the wheel hub preventing the lug nut from pulling the lug stud all the way through the wheel hub, and basically you do not want the lug nut to run out of threads before it can pull the lug stud flush with the wheel hub.

Let me know if you require any further assistance.

Jul 30, 2010 | 1999 Mazda Millenia

1 Answer

I am wanting to replace the rear wheel studs that are broken. The wheel hub flange won't come off. Is there a special puller for this, do I need to apply more force or is there another method for removal?


You do not remove the wheel hub flange, just follow the procedure that I replied to earlier, and this is the procedure if you do not want to obtain a special tool for pressing the lug studs;

First you will have to pound the broken lug studs out of the wheel hub, then you will need a lug nut and about a half an inch thick of flat washers.

1. Insert the new lug stud through the wheel hub from behind so that the threaded end is facing out towards you and then put some grease on the threads.

2. Then slip the flat washers onto the lug stud followed by the lug nut, and run the lug nut down to take up the slack.

3. Then using a breaker bar tighten the lug nut until it pulls the lug stud through the wheel hub and it is flush with the wheel hub.

Be sure that the amount of flat washers used will make up for any non-threaded part of the lug stud that might stick out past the wheel hub preventing the lug nut from pulling the lug stud all the way through the wheel hub, and basically you do not want the lug nut to run out of threads before it can pull the lug stud flush with the wheel hub.

Jun 13, 2010 | 2003 Chrysler Town & Country

2 Answers

Broken lug nut how to replace lug nut studs


take off tire. remove old stud by hammering it out with a punch. put a socket behind axle plate so as not to break the plate. when replacing, just start stud from back by hand, then use a lug nut to pull it in tight. when tight replace tire!

Apr 14, 2010 | 1999 Oldsmobile Intrigue

1 Answer

Replacing lug studs on the left front wheel of a 2006 ford f250


now are u talkin about the lugs or the wheel studs?? the lugs are easily replaced but the studs will be harder u have to total tear down the whole tire arrangement to pop the thing holding the studs on the pop them out with a hammer :) hope this helps

Mar 26, 2010 | 2006 Ford F-250 Super Duty

1 Answer

Lug stud


Here's another thought - if the stud isn't too badly stripped, you may be able to use a re-threading die to restore the threads. The thread type and size will depned on the make and model of your car. An autmotive parts store can usually help with this.
------------------------------

If you must replace the stud,

A bad stud can usually be driven out through the back of the axle flange. You said the stud was stripped. You can:

Force one of the lug nuts onto the stripped stud maybe two to three turns , then take a drift pin and drive the stud out the back. The stud will have grooves that hold it in place on the axle flange. You willl hhave to hold the stud head with vice grips and remove the lug nut to get the stud out.

To install a new stud, insert it from the back, add a little grease to the knurls (grooves) and pull it into place with a lug nut. The stud must be firmly seated in the axle flange.

Mar 28, 2009 | 1998 Pontiac Trans

1 Answer

1990 Sentra How it remove and replace lug studs on front wheel


there is a large nut that holds that hub on. Remove the cotter pin and the cap from the bolt... remove the bolt and the hub comes off.

Robert

Feb 27, 2009 | 1990 Nissan Sentra

Not finding what you are looking for?
1994 Honda Civic Logo

580 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Marvin
Marvin

Level 3 Expert

81400 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...