Question about 2002 Toyota Sienna
2002 Toyota Sienna auto sliding door only opens 1/3 of the way with auto button or manually and can't be forced open the rest of the way. Doesn't close using autoamtic buttons but can be pushed with great resistants. Cable is slack when door is open 1/3.
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
OK, here you go:
Pry out on the bottom of the cupholder bottom, relieve 2 clips, pull the bottom out & slide it down
Remove the door trim screw, and pry out on the door panel, relieve 10 clips, pull door trim off
Remove the horizontal upper trim cover at the top of the door; relieve 4 clips
Remove the vertical door trim cover; relieve 2 clips
Remove the window garnish around the handle; pull the small trim cover off; remove 3 screws
This exposes the inside handle
The inside handle is retained by 2 screws.
Posted on Sep 27, 2008
could very well be the relay for the power door and possibly the interior light relay... they are located in the fuse panel under the dash.
Posted on Jan 23, 2009
Have 2005 Sienna and its Driver side door was not openning. Cheap dealer fixed it himself in front of me. After opening the doors plastic assembly while sitting inside with a screw driver. Then he bent the clip towards left where the metal wire is connected. If you guys want to see what he did i would record a video and upload for you guys. Let me know at email@example.com
Posted on Mar 13, 2009
This may or may not work depending on exactly what is wrong with the door, I cant tell what is wrong without looking at it directly however:
You can try starting with all doors closed and unlocked, keys in hand disconnecting the battery and letting the vehicle sit for 2 min or so, then reconnect the battery. Put the key into the ignition and turn it to the on position but do not start the van. Next press the button to disable the power sliding door for the drivers side, then manually open the door fully, wait 5 seconds, then close it manually fully. Press button the button again to re-enable the power sliding door, then try to use it with the automatic feature either by pulling the handle or using your remote, this may or may not work depending on if the door has somehow become de-initialized (it should work now) however if something is broken inside the door closing mechanism or door closed/open sensors, the door will continue to malfunction.
Posted on Aug 23, 2009
Tips for a great answer:
Jun 03, 2014 | 2012 Toyota Prius v
Oct 06, 2013 | Cars & Trucks
Oct 09, 2009 | 2000 Toyota Sienna
Aug 23, 2009 | 2004 Toyota Sienna
Jul 01, 2009 | 2002 Toyota Sienna
Apr 09, 2017 | 2000 Toyota Sienna
Apr 27, 2009 | 2002 Toyota Sienna
Nov 04, 2016 | 2002 Toyota Sienna
175 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: