Question about 2002 Honda Civic

Open Question

What does "P1456-MANUFACTURER CONTROL AUXILARY EMISSION CONTROLS" mean?

Posted by on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 1348 Answers

SOURCE: what those code p1441 manufacturer control auxiliary emission controls mean

what you want to do is take it to nissan and scan it with the consult2 diagnostic system to tell you which of the many things in the system have failed.
the EGR is the most common.

Posted on May 28, 2009

Ad
  • 122 Answers

SOURCE: p1457 code manufacturer control

on the V-6 or the 4 cylinder models, this would mean that your o2 sensor heater circuit, if you had this replaced the last time, I would check the connections, they may be loose, Good Luck!

Posted on Sep 23, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Find and replace canister purge valve for 2002 honda accord


This code P1456 does mean that you replace purge valve . Could be other thing's must test the Evaporative emission system . P1456 Honda Evaporative Emissions Control System Leakage Fuel Tank Suggest you take an have a qualified repair shop diagnose the problem .

Oct 08, 2016 | 2002 Honda Accord

2 Answers

What does fault code P0497 mean for Honda Cr-v ?


Nothing for that code either. Are you sure you are reading the reader properly?

P1382 Cylinder Position Sensor No Signal P1456 EVAP Emission Control System Leak Detected (Fuel Tank System) P1457 EVAP Emission Control System Leak Detected (Control Canister System) P1459 EVAP Emission Purge Flow Switch Malfunction P1486 Thermostat Range/Performance Problem P1491 EGR Valve Lift Insufficient Detected P1498 EGR Valve Lift Sensor High Voltage P1508 IAC Valve Circuit Failure

Dec 30, 2015 | Honda Cars & Trucks

1 Answer

What does fault code P1450 mean for Honda Cr-v ?


No P1450 on a Honda?

P1382 Cylinder Position Sensor No Signal P1456 EVAP Emission Control System Leak Detected (Fuel Tank System) P1457 EVAP Emission Control System Leak Detected (Control Canister System) P1459 EVAP Emission Purge Flow Switch Malfunction P1486 Thermostat Range/Performance Problem P1491 EGR Valve Lift Insufficient Detected P1498 EGR Valve Lift Sensor High Voltage

http://www.obd-codes.com/trouble_codes/honda

Dec 30, 2015 | Honda Cars & Trucks

1 Answer

P1456 code


Your Code P1456 is a EVAP (Evaporative Emission Control System Leak Detected). Normally this is a leak in the System and will not cause a Miss. The Fuel goes to the Fuel Rail and the Excess is sent back to the Fuel Tank via the EVAP System. There is a Purge Valve on top of the tank that is probably causing the leak. The Miss is another issue (Spark Plugs, Ignition, Coil, or clogged fuel filter) would be where I would start.

Apr 01, 2014 | 2002 Nissan Sentra

3 Answers

I have honda odyssey and the service engin coms on and the cod is p1456 so ineed to figur out thanks.


This probably means:
  • P1456: Evaporative Emission Control System Leak Detected (Fuel Tank System)
  • Usually this is because your gas cap was not fully tightened. Be sure to turn it until you hear a click.
  • After you tighten the cap, it might take a couple days of driving before the light goes-out.
  • Be careful to tighten your gas cap regularly, because otherwise it puts a heavy strain on your emission system.
-

Mar 03, 2011 | 2000 Honda Odyssey

2 Answers

@004 Pilot the check engine light came on after my daughter bought gas. Autozone code was p1456. Car seems to be running fine.


2004 Honda Pilot engine light came on this morning. Last bought gas 5 days ago. Auto Zone checked and found code P1456, emission control system leak detected (fuel tank system)
Four options;
1) Loose fuel cap
2) Vapor canister saturated
3) Failed vent solanoid
4) Failed purge solenoid

Thanks.

Aug 14, 2010 | Honda Pilot Cars & Trucks

1 Answer

Radiator fans fuses keep blowing-chevy impala 2002. we need info on following codes: P0108, P0128, P 0341, P 0401, P 0420, P 1480, and P 1481. John


p0108 map curcuit high input, p0128 coolant temperature below thermstat regulating tempurature, p0341 is camshaft position sensor A-bank 1 ckt range/performance, p0401 is exhaust gas recirculation, insufficiant flow detected, p0420 is catalyst system efficiency below threshold, p1480 is manufacturer control auxilary emission controls, p1481 is same as p1480.

Jun 15, 2010 | 2002 Chevrolet Impala

1 Answer

P1457 code manufacturer control


on the V-6 or the 4 cylinder models, this would mean that your o2 sensor heater circuit, if you had this replaced the last time, I would check the connections, they may be loose, Good Luck!

Sep 23, 2009 | 2000 Honda Accord

1 Answer

What those code p1441 manufacturer control auxiliary emission controls mean


what you want to do is take it to nissan and scan it with the consult2 diagnostic system to tell you which of the many things in the system have failed.
the EGR is the most common.

May 28, 2009 | 2001 Nissan Xterra

Not finding what you are looking for?
2002 Honda Civic Logo

Related Topics:

376 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...