Question about 2008 Mazda Tribute

Open Question

2008 mazda tribute climate control only works on high

The climate control on works on level 4. it very slightly blows on level 3 but nothing on 2 or 1

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 373 Answers

SOURCE: A/C BLOWER WILL NOT TURN

HI...
The problem on your vehicle is .
THE BLOWER MOTOR RESISTOR..
when they come damaged the blower motor not work. or don't stop working.
just REPLACE the RESISTOR. and you will fix that problem.
I'm a mechanic for a few years. and have autorepair software
On my PC.

OK... I hope with this information you will fix the problem.

Thank's for use fixya.

Posted on Jul 25, 2008

Ad
TheAsian
  • 93 Answers

SOURCE: 2001 Acura TL Climate Control Blowing only Cold Air.

Ok it may be that the heater core bypass valve isnt opening. All that valve dose is when you turn the climate control to heat it opens a valve that allows hot coolant from the engine to flow through the heater core. What I would do is check that. It will be on the left side (passange) of your engine bay.You will see two black coolant hoses next to eachother and one will have a black box with a wire that runs to it. Have someone move the climate control from hot to cold to hot back to cold. If you dont see the wire move then you can move it yourself to open the valve.

Let me know if the valve opens or not using the climate control.

Posted on Dec 17, 2008

keemo68
  • 1263 Answers

SOURCE: climate control system only blow air out defrost vent

there is a good chance that you blend air door is stuck closed over your heater core and therefore not allowing the heat to flow, also your door that opens and close your direction of flow from the floor ,das,vent and defrost.your going to have to remove the lower cowling of the dash on the passenger side analso some of the center dash to actually check to see if the cable,servo motors. are acuating the doors.the issue could be just a stuck door or a misaligned cable or that it came off. that falls under the mechanical side of probabilities. electrical would most likely be a faulty selector switch or a servo motor

Posted on May 15, 2009

  • 54 Answers

SOURCE: 2004 chevy tahoe, dual climate control, blowing different temps

Its more then likely the temp door broken or temp door motor broken/stuck. There is 2-3 of these motors under the dash on the side of the evap/heater core box. Some require extensive labor to replace, good luck

Posted on Jul 29, 2009

Hrnsly
  • 154 Answers

SOURCE: the cruise control is not working 2002 Mazda Tribute

you have a bad cruise cable, this is a very common problem with the tribute. just go to your local dealer and have them replace it for you, it only takes about 30 minutes to do

Posted on Aug 13, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2005 mazda trubute won't start and i replace 40amp and got it work and it drive for a while and then it blow again


Mazda Tribute Questions - CarGurus

www.cargurus.com > Questions > Mazda

CarGurus2001 Mazda Tribute 3.0 Wont Start. out shopping one ... 0. Report. rebel54 asked a2005 Mazda Tribute i Maintenance & Repair question about a month ago ...

Tribute won't start - Mazda Forum - Mazda Enthusiast Forums

www.mazdaforum.com > ... > Mazda Vehicles > Mazda Tribute
May 22, 2007 - I have a 2002 Mazda Tribute V6. On Sunday it wouldn't start. ... 2005Tribute won't start! rizakag, Mazda Tribute, 4, 03-27-2006 09:29 AM ...
Why does my fuse in my 2005 mazda tribute keeps blowing ...www.cargurus.com > Questions > Mazda > TributeCarGurusSep 4, 2014 - Why does my fuse in my 2005 mazda tribute keeps blowing when I try to switch gears?Electrical problem - 2004 Mazda Tribute - RepairPalrepairpal.com > Questions > Mazda > Tribute > 2004 Mazda TributeApr 5, 2011 - Electrical problem on 2004 Mazda Tribute ... meter on the battery cable note the battery draw then remove fuses one at a ... 2005 Mazda Tribute.2005 Mazda Tribute, Fuse #3 Blows, No Tail Lightswww.sparkys-answers.com/.../2005-mazda-tribute-fuse-3-blows-no-tail.h...

Jan 30, 2016 | 2005 Mazda Tribute

1 Answer

Where is the number 1 cylinder on a 2003 mazda tribute?


firing order1-4-2-5-3-6

1-2-3
4-5-6
v
v
front of vehicle

Jun 17, 2014 | 2003 Mazda Tribute

1 Answer

I am in the market to buy a used 2008 mazda tribute. I have been hearing things about needing special tools to fix the car. Is this true? Are the tools expensive? Also is the engine an interference or...


1. Typically Mazda builds engines with very close tolerances therefore they are HIGH interference engines.
2. Every car manufacturer has specialty tools that are needed. This includes all foreign and domestic.
3. Any tool that is REQUIRED to repair a car will not be cheap because the manufacturer does not want you tinkering with it. Therefore they engineer it to require the tool.

Jan 22, 2013 | 2008 Mazda Tribute

2 Answers

2003 Mazda MPV heater blows heat, then blows normal temp air, then heats and so on. Trying to find what is the problem. The unit is blowing air all the time but the temperature changes within seconds.


Have you checked your antifreeze level? When the vehicle is cool check the level and top it off if its low. Read your manual if you're not sure where to look.

Dec 19, 2012 | 2000 Mazda MPV

2 Answers

I have 2008 mazda tribute I the gas meter is not working any suggestions


its usually the fuel level sender switch in side the gas tank

Dec 02, 2012 | 2008 Mazda Tribute

1 Answer

Replace spark plugs on a 2008 4 cylinder tribute


This is a fairly easy job. Do each cylinder one by one (removal and install), make sure to reinstall the coil on the same exact cylinder (DO NOT MIX UP). 1. Remove coil retaining scre 2. Pull upward on the coil to remove. 3. Remove spark plug (using a spark plug socket). 4. Properly gap new spark plug (if applicable). 5. Apply sprark plug anti-seize compound on plug threads. 6. Install plug. 7. Aplly coil boot grease on the coils' rubber boot tips. 8. Reinstall coil.

May 22, 2010 | 2008 Mazda Tribute

1 Answer

2001 Mazda Tribute (3.0 L) Heater motor functions on high only


Its the Blower Resistor....If it was the switch, it probably wouldn't work at all....But the Resistor will give you those symptoms, of working on high med or low

Jan 19, 2010 | 2001 Mazda Tribute

1 Answer

2001 Mazda tribute 4wd es driverside front wheel noise?


iam am no doubt totally wrong here ,but i would first of all check the power steering fluid level ,then turn steering from left to right with engine running and check the fluid level again

Dec 23, 2009 | 2001 Mazda Tribute

1 Answer

Hello my 2002 mazda tribute heater fan is only working on low or high the settings in between are not functioning?


Its probable that if youre using no 2 and 3 and not 1 or 4 thats its worn out on these settings and you will need to replace the switch,its not the fan (obviously)and it does change speed so its not the resister,really looks like the switch needs checking and or replacing

Nov 16, 2009 | 2002 Mazda Tribute

Not finding what you are looking for?
2008 Mazda Tribute Logo

Related Topics:

273 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

76051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8265 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...