Question about 1999 Toyota 4Runner

1 Answer

Left rear axle leaking - Dealer states $820 to fix due to many parts within the axle. Does this sound right?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Fix same problem myself...these's' only 1 inner seal (differential output seal only-about 10$ each) that needs to be replace and new brake shoes (20$ part)..assumed u have rear drums and it leaked diff fluid on the brake shoes..but, i also replaced the brake cylinder (15$ part)-u have to disconnect brake cylinder to remove axle..look on internet for procedures..http://www.yotatech.com/f128/replacing-rear-axle-seals-3rd-gen-4runner-76339/..hope this helps..all dealers are ripoffs-worked at toyota for a year

Posted on Aug 12, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Driver side axle leak


front or rear? axle.
movement where
in, out, left right , up or down,. or all?
its a 3D world post directions.

btw, most seals that leak are due to bad bearings allowing the shaft
to beat the seal to bloody death, fact. (Timken.com)
only 1 exception, but is not where you are.

Jan 21, 2014 | 2003 Toyota Celica

1 Answer

Left rear axle seal leaking on 2007 ford escape how do you fix it


you will have to dimantle rear hub withdraw driveshaft and replace seal oon axle drain axle oil first square drain plug in centre of axle hope this helps

Sep 22, 2012 | Cars & Trucks

1 Answer

Rear axle leaking at right rear wheel


DO NOT WAIT- MY DEALER SAID I HAD A SMALL LEAK IN SAME PLACE, BUT DIDN'T SAY IT WAS URGENT. SEAL BLEW OUT DRIVING ON FREEWAY, DAMAGED ONE AXLE BEFORE I COULD EXIT. $1200 REPAIR. IT WAS NOT MAKING ANY NOISE TILL IT FAILED. SOUNDED LIKE TIRE THUMPING TO ME. DEALER REPLACED BOTH LEFT AND RIGHT SIDE SEALS, RIGHT SIDE BEARING AND RIGHT SIDE AXLE.

May 23, 2012 | 2003 Mercury Grand Marquis

1 Answer

Rear end makes rowing sound above 30 miles per hour also tjere is a leak of rear end grease on the left rear wheel.


THE LEAK is an axle seal leaking the noise is bearings in rear end could be axle bearing of carrier/pinion bearings while driving shift weight of truck side to side see if noise changes if so it is axle bearing if not then most likely differential bearings

May 11, 2011 | 1995 Chevrolet Blazer

2 Answers

I wanted to know what part to look up and learn about how to fix a rear axle leak on a 1999 gmc suburban 4x4


Where is the leak? Toward the middle or at the right or left sides near the rear wheels?

Sep 19, 2010 | 1999 GMC Suburban

1 Answer

There is a part located right over the rear axle that the rear brake lines attach to. This part is leaking fluid and the local auto parts stores have no idea what the part is. What is the name of this...


does this part bolt to the axle if so it is also the breather for the axle and the parts stores wont have it you will have to go to the dealer or the junk yard

Jan 24, 2010 | 1993 Nissan Pickup

2 Answers

2005 Mercury Mountaineer rear end whine, how hard to fix


Before you do this you might want to try fresh gear lube. On Ford products they use a synthetic additive in the rear and not in the front 4x4 axle.
The next thing would be to determine if it is a wheel bearing or a pinion bearing. You have to pull the axles and eliminate them as the problem. You might get lucky and not need to do the pinion.
The technical part of shimming the pinion gears with replacing the pinion bearing is about the worst part of the job. You won't know about the gears until you see them. You will need extra shims on hand.
It is a moderate job for two people. If you have all the parts it can be done in a day.

Aug 21, 2009 | 2005 Mercury Mountaineer

1 Answer

I hired a new mechanic to repair rear left oil


5 hours sounds about right plus seals and grease

Jul 13, 2009 | 2002 Chevrolet Tahoe

1 Answer

Vibrasion rear end 1998 f150


This is due to your traction lock axle clutch plates flinging off the lubrication and then chattering on turns. Add a 4 oz bottle of friction modifier to the axle fluid. Available from Ford dealer.

Did you have your axle lube changed at a fast lube place?

Apr 27, 2009 | 1998 Ford F150 Regular Cab

Not finding what you are looking for?
1999 Toyota 4Runner Logo

571 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...