Question about 1998 Chevrolet Blazer

1 Answer

98 blazer seems to go in 4 wheel drive. as it is driven it makes a loud pop/bang sound fron transfer case is it disingaging, slipping, broken gear?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 178 Answers

Most likely the chain has streched and is slapping against the case and or jumping teeth on the gears either way it's not minor.

Posted on Jul 31, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 1987 GMC s15 automatic 4x4 pickup keeps popping out of normal gear. The only gear it stays in is 4 low. Where do I start?


I'm assuming you're talking about the transfer case popping out of 2 high or even 4 high. It could be that the transfer case needs a chain or gears replaced and is slipping on the cogs/gears. In 4 low it takes less pressure/strain to move the vehicle so it doesn't slip. I would put the trans. AND transfer case in neutral, with the FRONT wheels blocked, and NOT running, jack at least one rear wheel off of the ground, and try turning the rear drive shaft back and forth to feel the free play (free play in the transfer case, not the rear end). Excessive free play should tell you that the drive chain/gears are very warn and could be slipping. That would be a start.

Jun 08, 2014 | Cars & Trucks

3 Answers

GMC '91 Jimmy, Transfer case. When in two wheel drive I hear a slight grinding noise and rattling noise. When in 4 wheel no noise. 330,000 miles, could something be worn? What keeps the transfer case gear...


Remove the transfer case and strip it down,wash it out and replace whatever is worn.
330,000 miles is unrealistic
Your chain is worn and stretched for sure, and rattling and may be cutting into the case.
Don't install another salvage yard unit, unless you can not repair yours. Then strip down whatever you purchase, and go thru it also.

Sep 17, 2010 | 1991 GMC S-15 Jimmy

1 Answer

Slip out when in 2 wheel


Check fluid level. Sounds like transfer case problem.

Jul 27, 2009 | 1987 Chevrolet Blazer

3 Answers

98 cherokee transfer case comes out of 4 wheel slow


i have a 1998 jeep cherokee that is stuck into 4 wheele drive how would i get it out of it

Mar 19, 2009 | 1998 Jeep Cherokee 4WD

3 Answers

I had my 98 ford explorer in 4wd low and when i was shifting out of 4 x 4 mode there was a huge clunk, then it seems that the transfer case or transmission will not let it go back to automatic drive it is...


98's do not have hubs. Sounds like the transfer case motor did not complete it's job. These motor have problems with brushes sticking if they are not cycled periodically.

Jan 18, 2009 | 1998 Ford Explorer

Not finding what you are looking for?
Cars & Trucks Logo

119 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...