Question about 1999 Chrysler Concorde

1 Answer

Where can I find a good tail light assembly - 1999 Chrysler Concorde

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chrysler Master
  • 6,826 Answers

At this point, I would try partstrain.com or any local salvage yard for a good tail light assembly at a good price.

Posted on Jul 31, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1998 Chevy Malibu, and the entire right tail light assembly is out. Is this likely to be a fuse issue, or a wiring issue?


Pull the connector from the back , test signals going into the tail light assembly , if good you need a new tail light assembly . No it's not a fuse issue . The brake light's ,turn signals , park lamps all have thier own power supply - different fuse's . Do you know how to test automotive electrical circuits with a volt meter ? How to use a wiring diagram so you know what your testing ? Here is a web site for free wiring diagrams http://www.bbbind.com/free_tsb.html Enter vehicle info. year , make , model an engine ! Under system click on lighting ,then under subsystem click on tail lamps . Click the search button then the blue link. Check the ground circuit (pin E ) grounds get corroded .
Electric Testing Techniques You Need to Know
Basic Electricity for Service Techs Ohm law Current Flow Opens Shorts
How to Use Multimeter Beginner Crash Course


Jun 05, 2017 | Cars & Trucks

1 Answer

How to replace, step by step, the rear brake light bulb on hyundai atos 1999?


How Do You Change Tail Light Bulb
Remove the wiring harness from the tail light lens assembly. Disconnect tail light bulb from the wiring harness socket. Reconnect the wiring harness to the tail light lens assembly. To confirm proper installation of the new tail light bulb, place the key in the on position.
IT IS VERY SIMPLE OR GO TO AUTOZONE AND HAVE THEM CHANGE IT OUT FOR YOU AND WATCH THEM ONCE. GOOD LUCK.

Jul 01, 2015 | Hyundai Cars & Trucks

1 Answer

What would be wrong if all lights work but break lights and fuse are good and bulbs are good why do i not have break lights


Brake light Switch near the brake pedal shaft is out of adjustment, or broken or wire disconnected or very bad connection. Otherwise a bad connection to the taillight assembly or a break in the wire between the switch and Taillight. Jumper the switch to test whether that is the problem. Test the Tail light by jumper from known good power to test whether it's the wire from brake light switch to the Tail light assembly.

Mar 28, 2015 | Cars & Trucks

1 Answer

My tail light went out in my 04 kia rio and i cant get to the bulb to change it


In order to change the bulb you must dismantle the tail-light assembly from the vehicle. In common cases, this is an easy procedure. First, open the trunk. Second, look behind the tail-light and look for any screws that may be in the bottom of the trunk behind the tail-light assembly (some carpeting may hide screws). Third, unscrew any screws, once all visible screws are off, and the assembly won't easily come off, there may be push in connectors, if so give the assembly a hard tug back and the assembly should pop off. Fourth, you will see the stock bulb connector wiring with the bulbs, simply turn the bad bulb by the fitting 1/4 counter clockwise and it should come out of the assembly. Fifth, simply pull out the bulb from the adapter, and push in the new one, the install procedure is simply reverse in steps. Good Luck.

Jun 23, 2011 | 2004 Kia Rio

1 Answer

How do you remove and replace the rear tail light assembly


Just open the rear tail gate and you will see 2 plastic fasteners on the side by the tail lamp assembly.You need to pry them out and then pull the lamp assembly out.Hope this helps.Good luck.

Oct 26, 2010 | 2004 Chrysler Town & Country

2 Answers

How do I replace a burned out backup light on a 1998 cheverolet silverado c-1500 pickup truck?


Removal & Installation Cab/Chassis gm-06-00-1071.gif

To Remove:
  1. Disconnect lamp assembly electrical connector.
  2. Remove nuts and lamp assembly from bracket.
  3. Remove lens screws.
  4. Remove lens, gasket and bulb.
To Install:
  1. Install lamp assembly and nuts to bracket.
  2. Connect electrical connector.
  3. Install bulb, gasket and lens.
  4. Install lens screws.
Except Cab/Chassis gm-06-00-1075.gif

To Remove:
  1. Lower endgate.
  2. Remove 2 tail/turn signal lamp assembly retaining screws.
  3. Rotate tail/turn signal lamp assembly and remove from vehicle.
  4. Disconnect lamp assembly electrical connector.
  5. Remove bulbs by pulling straight out of bases.
To Install:
  1. Install bulbs by pushing straight into bases.
  2. Connect electrical connector.
  3. Install tail/turn signal lamp assembly to vehicle and secure with 2 screws.
prev.gif next.gif

Jul 17, 2010 | 1998 Chevrolet C1500

1 Answer

How do i replace the tail light bulb?


to replace the GM tail light bulb, you will drop down the tail gate and you will notice 2 screws on the tail light assembly, you will remove those 2 screws with the proper screw driver, once you do that the whole tail light assembly will come off, then you will see onother 2 screws holding the light panel to the tail light assembly, or brackets holding the light panel to the tail light assembly remove either or and you will have access to the three bulbs on that light panel, replace the burnt one and follow the same intrunctions to put back.

Apr 06, 2010 | 2005 GMC Canyon

1 Answer

How do you replace a rear brake light on a 2003 durango


Take the trim off that covers the tail light assembly and then remove the bolts that hold it in.Once the tail light assembly is in your hand then unplug the lamp,turn the bulb to the right until it unlocks then pull it out,reverse all to assemble.Merry Christmas and good luck!

Dec 24, 2009 | 2003 Dodge Durango

1 Answer

How to access tail light bulb in 2005 ford f-150


Drop the tailgate, on the inside of bed where tailgate closes are couple of screws.These hold the light assembly in the bed. remove the screws, then remove light assembly. The light bulb can be removed from back of the tail light assembly. Check to make sure the lightbulb work before you put the tail light back together. Good luck and hope this helps and don't forget to add some grease to the light socket to prevent corrosion. 

Jun 24, 2009 | 2005 Ford F-150

1 Answer

Replaceing tail light bulb in 1998 dodge dakota


Remove the two screws from the holes in the tail light, then open the tail gate and there are two more on the inside of the bed, facing back towards the light assembly. Good luck dont forget to rate.

Mar 25, 2009 | 1998 Dodge Dakota

Not finding what you are looking for?
1999 Chrysler Concorde Logo

Related Topics:

41 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8270 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...