Question about 2000 Chevrolet Silverado 2500
Side View mirrors wiring diagram
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
well the best way is to take the inside mirro cap off there are 3 bolts that need to be taken out 10mm if its not accessible from there you need to loosenthe trim panel and take it off look around for hidden pop ups take the pop ups out and take the screws out then from there pull the bottom of the door trim out and slide arms around the edges and pull out there then pull up and outThanks for using fix ya. Please rate my response thank you very much
Posted on Jan 31, 2009
SOURCE: i need a audio wiring diagram
here are the wire colors and what they do, that is all I have.
2000 Chevrolet Cavalier Car Stereo Radio Wiring Diagram
Car Radio Constant 12v+ Wire: Orange
Car Radio Switched 12v+ Wire: Ignition Switch (The radio harness does not provide a switched power source. Run a wire from the Ignition Switch.)
Car Radio Ground Wire: Black
Car Radio Illumination Wire: Gray
Car Stereo Dimmer Wire: N/A
Car Stereo Antenna Trigger: Pink
Car Stereo Amp Trigger Wire: N/A
Car Stereo Amplifier Location: N/A
Front Speakers Size: N/A
Front Speakers Location: N/A
Left Front Speaker Positive Wire (+): Tan
Left Front Speaker Negative Wire (-): Gray
Right Front Speaker Positive Wire (+): Light Green
Right Front Speaker Negative Wire (-): Dark Green
Rear Speakers Size: N/A
Rear Speakers Location: N/A
Left Rear Speaker Positive Wire (+): Brown
Left Rear Speaker Negative Wire (-): Yellow
Right Rear Speaker Positive Wire (+): Dark Blue
Right Rear Speaker Negative Wire (-): Light Blue
Posted on May 02, 2009
you should only have to remove the plastic cover at the front of the window directly behind the mirror. It should only be held in place by a few little plastic clips which are part of the cover.
Once the cover is of you should be able to see the bolts that hold the mirror to the door, if you have electric mirrors there should be a little connector plug around there that you unplug to remove the mirror
Hope this helps
Posted on May 25, 2009
make your self a jumper set of wires to test with. Find out what makes what move on the old unit,write down the color wire,then apply power and ground to the new unit onw wire at a time.Mark down the color and what function it did.after testing both units then match your research and put the wires together.I wished I were there.Good Luck!
Posted on Jul 24, 2009
On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door
Posted on Sep 29, 2009
Tips for a great answer:
Aug 28, 2016 | 2008 Chevrolet Chevrolet HHR LT
Apr 09, 2016 | Cars & Trucks
Feb 23, 2012 | Lincoln Town Car Cars & Trucks
Oct 23, 2010 | 1998 GMC Jimmy
Jul 26, 2010 | 2002 Pontiac Grand Prix
Apr 17, 2010 | 2001 Ford Explorer
May 29, 2009 | 2000 Ford Explorer
Apr 29, 2009 | 2004 Toyota Camry
Jan 12, 2009 | Pontiac Grand Prix Cars & Trucks
242 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: