Question about 2006 Kia Optima

1 Answer

What are the ac torque specs for a 2006 kia optima?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Kia Master
  • 17,970 Answers

1.5L and 1.6L engines:
* Installation is the reverse of the removal procedure. Tighten the compressor mounting bolts to 17-26 ft. lbs. (24-36 Nm).


1.8L engine:
*
Installation is the reverse of the removal procedure. Note the following tightening specifications:

  1. Compressor mounting bolts: 18-23 ft. lbs. (24-31 Nm).
  2. Inlet and outlet bolts: 18-23 ft. lbs. (24-31 Nm).

2.0L engine:
*
The compressor mounting bolts and different lengths, as follows, and must be tightened in A-B-C-D order:
  1. Bolt A: 4.96 in. (126mm) long
  2. Bolt B: 4.65 in. (118mm) long
  3. Bolt C: 4.02 in. (102mm) long
  4. Bolt D: 4.02 in. (102mm) long

Hope helps.

Posted on Jul 31, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2004 Kia Optima Brake Torque Spec


Bracket bolts Front 16-24 ft/lbs
Caliper bolts Front 51-63 ft/lbs Rear 16-24 ft/lbs

Feb 03, 2017 | 2004 Kia Optima

1 Answer

I need specs for 2003 Kia Optima 2.7 cam hold down cap


Chiltons, normal cap torque is between 10 and 30 ft lbs call a machine shop

Nov 06, 2016 | 2003 Kia Optima

1 Answer

I need rod bearing torque specs 2011 Kia Optima 2.4


those specs are in the factory repair manual.

Feb 11, 2016 | 2011 Kia Optima

1 Answer

I need to know how to find/set timing marks for 2002 Kia Sedona and head bolt torque specs


The head bolt torque on a 2002 Kia Optima is 45 ft/lbs of torque. Always make sure you use a good torque wrench to get it right. ------------------------------------------------------------------------------------
Original Launch X431 Master

Mar 13, 2013 | Cars & Trucks

1 Answer

04kiaoptima 2.4crankshaft torque specs


main bearings torque is 18 ft lbs. plus 90 - 94 degrees, rod bearings torque is 13 - 16 ft lbs. plus 90 - 94 degrees.crankshaft damper bolt torque 80 - 94 ft lbs, fly wheel bolts torques 94 - 101 ft lbs.

Oct 29, 2012 | 2004 Kia Optima

1 Answer

Ac fuse keeps blowing on my 2006 kia optima 6cyl


You'll need to have someone check the circuit - could be a bad a/c clutch, relay, or short in the wiring.

Jun 30, 2012 | 2006 Kia Optima

1 Answer

Need how to set timing belt on kia optima


I had 2006 kia optima 2.4 liter LX, I drove 150000 miles plus, it was over 100,000 miles I changed timing belt, and AC belt, alternator belt is still ok, but it was my fault, I did not change crank shaft balance belt, it next to timing belt, this very important, timing belt and crank shaft balance belt must change same time, you set all mark the same positions, you can see all clear marked
if you had OBD2 scanner is helpful to read all faulty codes if you do it your self repair
if you have any problems about KIA optima, please post on any websites, to share some ideas to other KIA optima owners, like me, I change oil every 2500 miles to make my optima runs smoother
automatic transmission fluid change every year if you put high mileage on your car, optima had hard time to find it own part some time, radiator hoses are still good condition and had hard time to find in any auto part stores in my home town, good luck and thanks for sharing.

Jul 27, 2011 | 2006 Kia Optima

1 Answer

What is the torque value for an oil drain plug on a 2006 kia optima


Never heard of anyone using a torque wrench
on an oil drain plug

Kind of silly --just tighten it up
don't go crazy

Do you even own a torque wrench?

Jun 11, 2011 | 2004 Kia Optima

1 Answer

Torque spec optima 2.4L


unimportant.
use 1 hand and just snug it up. not real tight , just a little pressure past the stop.
i never seen a spark plug wiggle loose, since the spark plug wire doesn't allow it to spin

Jul 31, 2010 | 2004 Kia Optima

1 Answer

What is the torque spec for the head bolts on a 2004 optima with the 2.4L?


1st - step; - 25 ft./lbs.

2nd - step; - 50 ft./lbs.

3rd - step; - 50 ft./lbs.

4th - step; - turn 90 degrees
Torque the bolts in this order (looking at the heads)

10-6-2-3-7
9-5-1-4-8

Feb 25, 2010 | 2002 Kia Optima

Not finding what you are looking for?
2006 Kia Optima Logo

Related Topics:

219 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kia Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

76051 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8265 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...