Question about Mazda B2600

1 Answer

Need to get my hands on a manual for a mazda b2600. Just put a new head gasket in it and the timing is all out.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 170 Answers

Take the spark plug out of the hole on the engine. the very front plug.
have someone bump the engine for you. take the cap off of the distributor, and when your friend bumps the engine watch the way the rotor is turning. i think its counterclock wise. but anyway, hold your finger over the spark plug hole and have the friend bump -bump- bump the key until the air pressure "Pssst" blows your finger out of the hole. thats the compression stroke of your engine. and right now its set to send a spark to that #1 piston.
SO look at the rotor, and pay attention to what direction the rotor is pointed. and when you put your distributor cap back on, your wire for #1 spark plug has to be pointed at the rotors tip, to get spark. so put cap back on, and then put #1 at the rotor tip, and remember what direction the rotor spins ? now put your spark plug wires on the cap to match the "firing order" The firing order is 1-3-4-2 with the cylinder closest to the front of the vehicle being #1 so if the rotor spins backwards . wherever the rotor tip is now ( since you bumped it to the compresson stroke ) on the #1 cylinder, you know where 1 is. now put #3 piston wire on the next plug, on the distributor then 4 , then 2. tighten everything, put the spark plug back in. and start your truck bro.

Posted on Jul 31, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1989 mazda b2600 oil coming out of front seal from hole in toming cover


More info would be helpful ......With that little info I can only say replace the front seal and timing cover gasket....Really need to know mileage..,has it been serviced lately.....and so on...

Feb 19, 2014 | 1989 Mazda B-Series

1 Answer

How do i remove timing cover off 89 mazda b2600 2.6 seems to be hangin up at the bottom drivers side


put a rope to the car and toll it to the nearest scarp yard and burn the mazda

Nov 09, 2010 | 1988 Mazda B2600 Cab Plus

1 Answer

I want to replace the cylinder head gasket on a WL torbo engine for a mazda B2500. how can i get a manual to do this job. thanks for any advice.


Go on line and look up Haynes manual they have great pictures and how to advice i still need one now and again as they have all the tork settings .

Jul 23, 2010 | 1988 Mazda B2600 Cab Plus

1 Answer

I need to set up the camshaft timing marks on a 1994 mazda b2600


its not just the camshaft timing marks you set up, you also have to have the crankshaft timing mark set right to or you may damage your engine
check the internet for the right timing procedure for you model car ok

Jun 11, 2010 | 1988 Mazda B2600 Cab Plus

1 Answer

B2600 white smoke coming out of exhaust


i`ve never heard they are interchangeable, Are you sure its the head? i would inspect the #1 cylender a little further for a hair line crack

Jun 09, 2010 | 1990 Mazda B-Series

1 Answer

1991 B2600 190,000 miles radiator flushed,


If it rapidly overheats, that's generally a sign of a blown head gasket. Some shops have what is called a "sniffer" that they can check to see if you are getting exhaust fumes into the cooling system. You may want to check into that before you tear the engine down. Are you sure you have the thermostat in the right way? That will also cause rapid overheat, if it's backwards, the spring goes toward or into the engine.

Mar 06, 2010 | Mazda B2600 Cars & Trucks

1 Answer

Engine compression low on three cylinders, what should the compression psi or bar be please? It has a slight miss but leads and plugs seem to be sparking fine, any ideas. This vehicle is actually a 93...


yes a head gasket failure cancause this. spary oil, wd-40 into those 3 cyc;lindersand see if cmpression increases. if it does you need rings. if it does not you need a head gasket.

Jan 02, 2010 | 1988 Mazda B2600 Cab Plus

1 Answer

96 brazo oil and mtal in over head cam engin stopped on highway


i have seen some mazda motors having busted cam shafts, so that's the only thing i can think of. if you didn't say behind the throtle body, i would say you have a busted piston but i doubt that's the case here.

Mar 02, 2009 | 1988 Mazda B2600 Cab Plus

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

278 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8567 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...