Question about 2002 Mitsubishi Mirage

1 Answer

Mitsubishi Mirage 2002 remote door control problem

Mitsubishi Mirage 2002 remote door control operates drivers door but does not open or close passengers door.

Passenger door can be heard to click but does not operate.
How do I remove door trim to access locking mechanism

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,016 Answers

Hi,

First unscrew the handle/arm rest of the door you should see 2 little plugs cover the screws.

Then unclicp the backing plate where the inside door handle is.
Get a thin towel and turn the window winder handle till it's pointing straight up, then pull the thin towel inside of the door handle, pull it down hard so that the clip that holds it on can be removed.
Then there is a couple of screws holding the door panel on, after these are removed you should be able to just pull the door trim away.

There will be some clips on it on though but just get your hand behine the trim an pull it firmly.

Hope this helps, let me know if you need more information.


Thanks

Jason

Posted on Jul 31, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I get my back driver door to open on my 97 Mitsubishi mirage. Won't open from inside or out.


You must remove the inside door card and them manually release the door latch inside the door.

Oct 25, 2016 | Mitsubishi Cars & Trucks

1 Answer

Central locking


doors should open/ lock. with remote both.

Jan 12, 2014 | 1992 Mitsubishi Mirage

1 Answer

My car alarm on a 2000 Mitsubishi mirage sounded all of a sudden when i tried to start it. How can i disable the alarm system so i can drive


Close all the doors and windows. Lock and un lock with the remote or at the driver door with the key. This should reset the alarm.

Dec 05, 2013 | Cars & Trucks

1 Answer

Keyless entry not working


Programming
When
Remote control added or replaced. System malfunction.
How
Obtain all remote controls. Remove key from ignition switch. Close all doors. Open driver's door. Carry out the following within 24 seconds: Turn ignition switch ON and back to LOCK position 3 times. Remove key. Press and release driver's door courtesy light switch 3 times. Ensure doors lock and unlock. If not, wait 40 seconds and repeat procedure starting with driver's door already open. Press each remote control lock or unlock button twice. Ensure doors lock and unlock after each remote control operation. If not, proceed as follows: Press and release driver's door courtesy light switch once. Ensure doors lock and unlock twice. Repeat procedure starting with driver's door already open.
NOTE: A maximum of 3 remote controls can be programmed.

Mar 29, 2010 | 2004 Mazda 6

1 Answer

97 Mitsubishi Mirage electrics:


problem with the wiring ,the door lock feed wire is touching another wire somewhere so the change in resistance is throwing the door locks on ,where the fault is??

Mar 15, 2010 | 1997 Mitsubishi Mirage

1 Answer

Central locking fob


Programming
When
Remote control buttons operated repeatedly while vehicle out of range and system becomes inoperative. System malfunction.
How
Ensure ignition switched OFF and all doors closed. Proceed as follows: Within 10 seconds, open driver's door and switch ignition ON. Within 10 seconds of switching ignition ON, switch ignition OFF. Within 20 seconds of switching ignition OFF, press and release driver's door contact switch 3 times. Within 10 seconds of releasing driver's door contact switch, switch ignition ON then OFF. Within 20 seconds of switching ignition OFF, press and hold both remote control buttons in turn for at least 5 seconds. The driver's door should lock and unlock once. Within 5 seconds of driver's door locking/unlocking, press remote control lock button Fig. 1 [1] or unlock button [2]. Programming procedure complete. Confirm programming has been successful by locking and unlocking vehicle.
NOTE: A maximum of 2 remote controls can be programmed.

Feb 05, 2010 | 2002 Suzuki Grand Vitara

1 Answer

How can I re active the wireless remote control system ?


sit in car all doors closed put key in ignition and turn from OFF to ACC 3 times as fast as you can leaving it in ACC on the last cycle then press your remote button. your blinkers should flash to tell you this has worked.... may take you a couple of tries to get it!!

Jun 30, 2009 | 2002 Toyota Camry Solara

1 Answer

2002 Old Silhouette Driver Power Sliding Door will not open


Look in your owners manual there is a procedure to reset the door controls. If that dosen't work maybe the motor is burnt out, it's in the left rear access panel.

Mar 25, 2009 | 2002 Oldsmobile Silhouette

1 Answer

Driver door unable to lock or open using the remote - 2002 Galant


If you can unlock it with the key,and not the remote, then it sounds like the lock actuator is not working in that door.In order to check it, the door panel has to come off.

Jan 26, 2009 | 1991 Mitsubishi Galant

1 Answer

2002 Mitsubishi Mirage Driver Side Window


If it is a power window you will need to get a new motor for it.If its' a manual window crank it's just off the track you just gotta pull the door panel off to put it back on track you might have to go to a junk yard to get the parts to put it back on track.

Nov 06, 2008 | 2000 Mitsubishi Mirage

Not finding what you are looking for?
2002 Mitsubishi Mirage Logo

Related Topics:

94 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8266 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...