Question about 2000 Lincoln LS

1 Answer

I dont know what to do i love my car but my motors going i nd a cheap motor i bearly have funds im depressed

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,793 Answers

You dont say what is wrong with the engine but as they are simple to work on when out of the car,and you dont have to replace all the bits,just the ones that are worn, invest in a haynes manual and take your time taking out the engine and rebuilding it,if you do it,and it runs sweet when you restart it after, it feels great.....or get an engine from a scrapyard and take a chance it works.you can allways ask an "expert" on this site for how to.....
giving instructions from start to finish for a complete rebuild would take several pages...

Posted on Jul 31, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I just replaced the clutch andn slave cylinder after i bled it i went to apply the clutch and it takes all the muscle ive got to get it to go to the floor. did i install the clutch or bearing wrong or is...


it is possible that the bearing has jammed or dislodged when u fitted box,which has depressed the clutch-try looking through starter motor hole im a mech of 30 yrs and its happend to me on a few ocasions-i feel for u as the box will have to come back out

Aug 10, 2010 | 1987 Toyota Pickup

1 Answer

I need to replace the bearings in the drivers side front wheel,but cant find any car shop or garage that stocks daewoo parts anymore? I've had people tell me i can use bearings from astra? Is there any...


gm dealers, motor traders stock genuine parts for these vehicles, im in australia and can get after market also from, repco, sprints, etc...or even go straight to bearing company eg. cbc bearing company, tkn, etc... depending on brand of old bearing. i suggest you try a bearing company out of phone book some have listings for vehicle applications.

Aug 04, 2010 | Daewoo Lanos Cars & Trucks

2 Answers

My temperature control knob only works on #4


Been there That would be the blower resistor and at least in the cases i have seen that usually means the motor is going bad you can replace the resistor fairly cheap not sure exactly where it is on you car but i would assume it is under the passenger side dash dont quote me on that dont know what type of car it is when you but just ask they should be able to tell you 
good luck

May 24, 2010 | 2004 Dodge Stratus

1 Answer

None of my windows will roll down the side mirrors cant be adjusted,the interior lights stay on, brake lights will not light up and my driver side lock is non working im limited on funds since i recently...


I think you have defective window regulators. I would start with the back window first. Remove the door panel by prkying up the cover which holds the switch. Remove the door panel. You will see a white plastic which is a water bearier peel this down and reglue after you check the regulator. You will see aluminum brackets holding in the egulator and 3 star screws holding in the window motor. Remove the three screws hlding in the motor and remove. There will be one screw hlding the plate on the motor, remove this and check the plugs which operate the motor. These are plastic. I would replace these with ball bearings, cheaper. The plastic plugs cost $8.51 the bearings $.64 cents a piece. Pack the motor with wheel grease. Now you will see aluminum plugsa holding in the window regulator. Using a punch punch out the rivits, then usaing a 1/4 drill bit drill out the aluminum. Remove the regulator and inspect if defective replace. Purchase the regulators on line, $18.00 a piece vs $90 at a shop. REplace the aluminum with 1/4 bolts and self locking nuts. Do one window at a time.

Jul 21, 2009 | Jeep Grand Cherokee Cars & Trucks

2 Answers

1992 volvo 240 timing belt replacement


timimg belts usually don't make noise, they break and the motor stops!! The noise could be coming from a bad water pump, powersteering pump, air compresser, alternater, leaky exhaust, leaky vacume lines. Check them out. Or, I don't know the condition of the engin. Has it been neglected and are the bearing going? More history would be helpful.

Jun 15, 2009 | 1992 Volvo 240

1 Answer

Engine lacks power


the probes use the mazda motor.... the engine light is caused by a lean fuel mixture...this happens on almost every american motor..its the ecu tuning. this is a way for the a-spec motor to have less horsepower, but they detuned too far. if you replace the ecu with the j-spec one you will not have the light, and gain somewhere around 15 hp im not sure how much or how dramatic the losing power thing is but i do know that the 2.5l motors love LOVE the rpms... so 3,000 rpm is really where the motor starts to run good, other than that im not sure

Dec 10, 2008 | 1987 Nissan Pickup

1 Answer

Interment spark to plugs no start 85 vw scirocco


should run great go back to timing and check alignment of tdc to camshaft

Nov 15, 2008 | 1996 Volkswagen Jetta

1 Answer

My motor shakes


1). mis fire on one or more cylinders
2). timing
3). fuel flow
4). air flow
lets go with these for now.

Oct 22, 2008 | 1992 Honda Accord

Not finding what you are looking for?
2000 Lincoln LS Logo

Related Topics:

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lincoln Experts

yadayada
yadayada

Level 3 Expert

77169 Answers

fordexpert

Level 3 Expert

5575 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Are you a Lincoln Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...