Question about 1999 Buick Park Avenue

1 Answer

Wondering how to get the door panel off so i can replace the motor for the window

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 170 Answers

They sell a door panel tool , but i usually just use caution and a small flat screwdriver. locate any screws on the door panel ( usually there;s a few around the door handles, and possibly some near the armrests. ( take them out first) then remove the handles. use the screwdriver and gently push it behind the door panel and feel around for the door panel clips. they are generally button styled press in plastic pieces that can be worked loose by using leverage and the screwdriver,be carefull not to pull too had on the door panel Causing it to crack in half / But generally the door panel can take some abuse= the door clips will be in several spots around the door panel, ( they slip in the back of the door panel and pop into holes in the door) and normally pop loose easy.the trick is to get the plastic door panel clips to pop out of the door holes / not the door panel slots= reinstall in reverse order,

Posted on Jul 31, 2010

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 56 Answers

SOURCE: replace 1994 chevy camaro window motors

the best thing that u can do is go to the store and buy the repair manual for your car they usually run between $15 and $20 and they will have step by step instructions and pics....not only is it good for this but pretty much anything else u want to know about ur car..hope this helped

Posted on May 22, 2009

  • 78 Answers

SOURCE: Replacing drivers side power window motor

NO not really just make sure you have the window is all the ways up and hold it with duct take to keep it from coming down.Remove the motor and unplug the harness.Install the new one and plug it in .Its that easy

Posted on May 23, 2009

  • 66 Answers

SOURCE: need to pull door panel off to replace power

There are 2 screws holding the window switches to the door and 2 screws for the door panel, one is in the pull handle, the other behind the window switches. Remove these screws and using a trim remover(hopefully) work around the sides and bottom of the door to pop the plastic retainers out of the door, push in at the top of the door panel and push up from the bottom to release the top retainer.
There is more to changing the motor than you may think. Steel cover has to be popped off and reused, so be careful.

Posted on Jun 08, 2009

  • 179 Answers

SOURCE: remove inside door panel

plastic place pins all along door carefully pop out with screw driver as to not damage them there should be screws in places too ie inside rest and or window roller

Posted on Sep 16, 2009

SOURCE: Window motor replacement

Most door panels have screws in places like armrest and under/around door handle and they have with pop/snap fasteners around the edge. Prying the edge up slightly with a broad tipped tool, you can find these fasteners. Use the tool (something like a very bif flat tip screwdriver) to gently pry the fasteners loose.

Charlie

Posted on Oct 01, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My drivers side rear window is stuck down. You can hear the motor moving up and down but the window is off track and not catching to come back up. I was wondering how to remove tghe door panel so i can...


I just replaced the window regulator in my deville.Mine was doing the same thing.I found the part online for 35.00.You have to take the door panel off and remove the regulator.That's the metal track that holds the window in place.Once you get inside you disconnect the motor and then the regulator.It is held on by three bolts.Unbolt it from the window (there is two bolts for that)and take out the regulator.Install the new one the same way you took it out and reconnect the motor.Test it before putting it back together.When you unbolt the window and take out the regulator be careful.The window will fall down into the door when you take the two bolts out that hold the window.It's good to have someone with you,but you can do it yourself.The hardest part is getting the door panel off.There is 8 or 9 clips around the door from the sides to the bottom.There are 2 screws in the armrest and one underneath the door handle.be patient and good luck.

Jul 08, 2011 | 2004 Cadillac Deville

1 Answer

Replace window motor 96 chevy cavalier


take out the door padding
unscrew the glass from the panel
take the glass support kit out
remove the motor and replace it.
NOTE : MAKE SURE THE WIRE DOESNT TRIP OFF THE PULLY.

Mar 03, 2010 | 1996 Chevrolet Cavalier

1 Answer

How to install a new power window motor in my 1993 Mercury Grand Marquis? I have a 1993 Mercury Grand Marquis Ls and the power window doesn't work. So then I bought some new window motors and I was...


Remove all screws to door panel. Remove the lock and window controls. Then take large flat-tip screwdriver and gently pry directly next to plastic studs holding panel on to door. Lift door panel off. Remove plastic out of the way. You will now have access to window motor. You may have to solder off old wiring. Or if you have enough to cut, would be good

Sep 11, 2009 | 1993 Mercury Grand Marquis

2 Answers

Removing/installing 2000 dodge grand caravan window glass


after u remove the bolts that hold it to the window regulator tip the window towards the front of the door and the top rear corner of the window should pop out and then u just lift hte window out,hope this helps

Sep 05, 2009 | 2004 Dodge Caravan

1 Answer

Need to remove and replace the driver side door panel


Could be a bad switch, bad window motor, or clutch in window motor, ccould also be that the window itself jumped track.

Jun 04, 2009 | 2000 Buick LeSabre

1 Answer

Replacing drivers side power window motor


NO not really just make sure you have the window is all the ways up and hold it with duct take to keep it from coming down.Remove the motor and unplug the harness.Install the new one and plug it in .Its that easy

May 23, 2009 | 2003 Mazda MPV

1 Answer

Right rear window of 2004 Honda Odyssey will close.


you can close it by pulling the door panel and removing the electric motor that raises the window, then lift the window closed and reinstall the motor, but the motor is most likely defective so if u go to all that hassle just replace the motor.

Mar 30, 2009 | 2004 Honda Odyssey

2 Answers

2005 chevy impala rear driver power window stopped going up.stuck


If neither switch works it is a bad connection at the motor or bad ground or a bad motor. Remove the door panel unplug the motor push the switch and see if there is 12volts on the wires if there is the motor is bad There are small brushes in the motor that go bad tap on the motor while pushing the switch if it works that way replace it

Mar 29, 2009 | 2005 Chevrolet Impala

1 Answer

How to replace power window motor on 2001 dakota


its not hard guys Take the door trim panel by taking off screws and mirror cover / pull out bottom of door and then sides pull up and outthen take off vapor barrier then look inside of door put tape on glass to hold it up take out bolts on the regulator and exchange it Please rate my response thank you very much

Dec 16, 2008 | 2001 Dodge Dakota

1 Answer

I have a F150 and the driver's window stopped working. THe motor makes noise but nothing moves the window. I've read posts about the trend with bad window parts. Am about to order the regulator, but wonder...


i wouldnt replace the motor if it is working it sounds like the window is off track inside the door take the panel off the door and see if its on track. if not u can get it back on track that way

Nov 27, 2008 | 2004 Ford F150

Not finding what you are looking for?
1999 Buick Park Avenue Logo

132 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6918 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...