Question about 1998 Chevrolet Corvette

1 Answer

When i try to start enging it does not turn over and the panel goes out,i changed battery ,1998 corvette 5.7 liter

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 22,156 Answers

Try the engine to chassis earth strap ,use a couple of jump leads one from neg to chassis and another neg to engine

Posted on Jul 30, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Starts fine idles fine for 3-5 mins. then gets erratic and cuts off


prolly electric choke not working properlly. with eng cool remove breather cover on carb. start eng and watch butterfly valve it should start to open slowly as eng gets warm. when eng reaches 190 deg or so it should be open all the way (vertical) if not it will need adj or possible replaced

Jun 14, 2014 | 1995 Chevrolet Corvette

Tip

Chevrolet service light 1991-01


Camaro

1998-01

To reset the "OIL CHANGE" light, press and hold the "TRIP/OIL RESET" button on the instrument panel for 12 seconds. When the light flashes and then goes out, the system is reset.


Corvette


1997-01

To reset the monitor after an oil change, turn the ignition on. Press the "TRIP" button so that the "OIL LIFE" percentage is displayed. Press "RESET" and hold it for two seconds. The word "RESET" should appear on the monitor, then "OIL LIFE 90%".


Impala,
Monte Carlo


2000-01

Turn the ignition to ON without starting the engine. Fully press and release the accelerator three times within five seconds. If the CHG OIL SOON lights two times, the system is resetting. Turn the key to OFF, then start the vehicle. If the CHG OIL SOON light comes back on, the system has not been reset, repeat the procedure. Follow this procedure to reset the GM Oil Life System using the DE 100 Series Radio. Turn the ignition to ACC or ON and the radio off. Press and hold the DISP button on the radio for at least five seconds until SETTINGS is displayed. Press the SEEK up or down arrow to scroll through the main menu. Scroll until OIL LIFE appears on the display. Press the PREV or NEXT button to enter the submenu. RESET will be displayed. Press the DISP button to reset. A chime will be heard to verify the new setting and DONE will be displayed for one second. Once the message has been reset, scroll until EXIT appears on the display. Press the DISP button to exit programming. A chime will be heard to exit programming. A chime will be heard to verify the exit.


Impala,
Caprice


1994

To reset the "CHANGE OIL" light, turn the ignition switch to the run position with the engine off. Access the reset button on the end of the instrument panel by the fuse block. Press the switch and hold it for at least 5 seconds.



Lumina,
Monte Carlo,
Impala,
Caprice


1996-00,
1996-99,
1995-96,
1995-96

To reset "CHANGE OIL" light, turn the ignition switch to the run position without starting the engine. Fully depress and release the accelerator pedal 3 times within 5 seconds. The light will flash and go out.


Corvette


1990-96

After an oil change, or when "CHANGE OIL" appears on the Trip Monitor, with the ignition on and engine off, press the "ENG MET" button (located on trip monitor) once. Press the "ENG MET" button again within 5 seconds. Within 5 seconds, press and hold the "RANGE" button (1990-1994) or "GAUGES" button (1995). The light will flash. When it stops flashing and goes out, the system is reset.


Chevrolet Suburban,
GMC Yukon XL,
Chevrolet Silverado,
GMC Trucks Sierra


2000-01,
1999-00

Turn the ignition key to the RUN position. Fully push and release the accelerator pedal 3 times within 5 seconds. If the CHANGE OIL SOON light flashes 2 times, the system is reset. However, if the light comes on and stays on for 5 seconds, the system did not reset. Repeat the procedure if the system does not reset.


Silverado, Sierra Trucks


1991-93

To reset the "CHANGE ENGINE OIL" message, turn the ignition key to the run position. Press and release the accelerator pedal three times within 5 seconds. If the light flashes for 5 seconds, the system is reset. Repeat procedure as needed.















on Dec 07, 2009 | Chevrolet Camaro Cars & Trucks

1 Answer

HOW DO I RESTET CHANGE OIL LIGHT ON 1990 CORVETTE


Corvette 1990-1996

After an oil change, or when "CHANGE OIL" appears on the Trip Monitor, with the ignition on and engine off, press the "ENG MET" button (located on trip monitor) once. Press the "ENG MET" button again within 5 seconds. Within 5 seconds, press and hold the "RANGE" button (1990-1994) or "GAUGES" button (1995). The light will flash. When it stops flashing and goes out, the system is reset.

Hope this helps and just keep in mind that your feedback is important and I'll appreciate your time and consideration if you leave some testimonial comment about this answer. Thank you for using FixYa.

Jose.

Oct 19, 2011 | 1990 Chevrolet Corvette

2 Answers

I have a 1998 Chevrolet Corvette (C5), which after changing out the battery, has initiated theftlock. I was not the one who set the code to unlock it, so that poses a problem. On other forums, I noticed...


TRY THIS TRICK .THE PASSIVE SWITCH IN OFF POSITION. STAND 5 FT OF THE VECHICLE .PRESS AND HOLD REMOTE TRANSMITTER LOCK AND UNLOCK BUTTONS FOR 7 SECONDS.HORN CHIRPS TO CONFIRM SYNCHRONIZATION. NOW SWITCH IGNITION ON. SWITCH RADIO OFF. PRESS THE RESET BUTTON ON THE DRIVER INFORMATION CENTER DIC IN ORDER TO CLEAR ANY INSTRUMENT PANEL CLUSTER IPC WARNING MESSAGES. PRESS AND RELEASE THE OPTIONS BUTTON ON THE DRIVER INFORMATION CENTER DIC TO SCROLL THROUGH OPTIONS UNTIL THE INSTRUMENT PANEL CLUSTER IPC DISPLAY IS BLANK.PRESS AND HOLD THE RESET BUTTONS FOR 3 SECONDS. PRESS THE OPTIONS BUTTON UNTIL FOB TRAINING MESSAGE IS DISPLAYED.PRESS THE RESET BUTTON IN ORDER TO START THE PROGRAMMING MODE.THE MESSAGE HOLD LK +.UNLK 1ST FOB WILL BE DISPLAYED. IF THIS DONT WORK DEALERSHIP FIX.THEY HAVE TO USE DIAGNOSTIC EQUIPMENT TO RESET THEFT SECURITY SYSTEM.

Dec 31, 2010 | 1998 Chevrolet Corvette

1 Answer

I have changed the oil &filter,and the light on dash is still on telling me change oil,and motor requiers service soon. rev.counter does not work, can you help please. email s.stephen@clear.net.nz


Resetting Engine oil Life Monitor
1, turn key to on, but do not start.
2. Press ENG MET button on the Trip Monitor within five seconds.
3. Within five seconds of step 2, press and hold RANGE button on the Trip Monitor. The CHANGE OIL light will flash.
4.Hold the RANGE button until the CHANGE OIL light stops flashung and goes out. This should take about 10 seconds.

If it doesn't reset turn key off and repeat the procedure. Careful to observe the "within 5 seconds"

necss03

Nov 23, 2010 | 1991 Chevrolet Corvette

3 Answers

Reset change engine oil light


Information taken from: http://www.idavette.net/tech/oilreset.htm

[quote]
The "Change Oil" indicator is reset by using a sequence of Driver Information Center (DIC) key presses as follows:

1. Turn ignition "ON", but do not start engine. (ALDL pin "G" should NOT be grounded.)
2. Press the "ENG/MET" button and release, then, within 5 seconds, press it again.
3. Within 5 seconds of Step 2, press and hold the "GAUGES" button. While the button is held, the "Change Oil" indicator will flash.
4. Continue holding the "GAUGES" button until the "Change Oil" indicator stops flashing and goes out, indicating successful completion of the reset cycle. This should take about 10 seconds.
If it does not successfully reset, turn ignition "OFF" and repeat the procedure from Step 1.
[/quote]

Nov 16, 2009 | 1991 Chevrolet Corvette

1 Answer

How to turn off change oil light on 2001 Corvette


Unless there is something wrong with you buttons the procedure is as follows:
1. Turn ignition key to ON (not start)
2. Press ENG MET button on trip monitor & release, then press it again within 5 seconds.
3. Within 5 seconds again press and hold GAUGES button until Change Oil lamp flashes.
4. Continue Holding Gauges button until lamp stops flashing & goes out.
5. You should be done, start & shut off car. If it didn't work turn off car and start from top.

Some buttons are very sensitive so try and be deliberate & steady when holding.

If that helps please rate my answers!
Brett

Mar 19, 2009 | 1994 Chevrolet Corvette

2 Answers

How do I turn off the change oil light on a 1994 corvette


1. Turn the key to “Run,” but don’t start
2. Press “ENG MET” on the Trip
the engine.
Monitor. Then, within five seconds,
press it again.
3. Within five seconds, press and hold
“GAUGES” on the Trip Monitor. The
“CHANGE OIL” light should flash.
4. Hold the “GAUGES” button until the
“CHANGE OIL” light stops flashing
and goes out. This should take about
ten seconds.
When the light goes out, the monitoirs
reset. If the monitor doesn’tr eset, turn the
ignition off, then try again.

Nov 18, 2008 | 1994 Chevrolet Corvette

1 Answer

98 PLYMOUTH GRAND VOYAGER WONT START - BLOWS ENG FUSE - HELP


You have a shorted engine harness, this is not common but it does happen, heat and engine movement cause damage to the harness, this is most common on hi miler cars and vans, the only way to fix it is to start by looking anywhere the harness rubs, that is where the damage occurs.

Oct 15, 2008 | 1998 Plymouth Grand Voyager

6 Answers

Safety 1st yellow corvette


Below the radio is a panel held on by two knobs labelled "driver" and "passenger." Unscrew these knobs to get to the radio battery cover. Remove the battery cover with a phillips screwdriver and replace the batteries.

May 15, 2008 | 2004 Chevrolet Corvette

Not finding what you are looking for?
1998 Chevrolet Corvette Logo

Related Topics:

48 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...