Question about 1988 Honda Accord 4 Door

1 Answer

Timing marks for 88 honda prelude - 1988 Honda Accord 4 Door

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 360 Answers

Hi, this timing mark is for the 85 model, but they are the same..
Click on the following direct Link. It has the Timing Belt Diagrams with Marks for the Camshaft and Crankshaft AND Guidelines that you will need.
"Align Mark on Camshaft Sprocket with the Valve Cover Surface."
It also has a variety of other Diagrams for your future use.
Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com

http://www.2carpros.com/car_repair_information/year/1985/make/honda/model/prelude/1985_honda

Posted on Jul 30, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

88 Honda prelude SI wont start?


U need to re-timed the engine. Check all four marks going across the two cam pully is lined up with the engine head surface.
Then check the crank pully alignment mark the single notche align to the mark on the timing cover

Apr 05, 2015 | 1988 Honda Prelude

1 Answer

How to set crankshaft timing on 1992 honda prelude 2.3 liter?


here is a u-tube video with a good tip for making sure the timing marks dont get move once set may help
How to replace timing belt on Honda Prelude 92 96 2 3 lt H23a1

Jul 28, 2014 | 1992 Honda Prelude

1 Answer

I have an 88 prelude with a low idle problem. from a cold engine start, it starts with 2000 or higher rpms and then after its warms up it goes back down to ABOUT a thousand but then bounces around eve


Hi Lasbs, Check the ignition timing and adjust with a stroboscopic timing light. The correct timing should be 10 degrees BTDC. If the vehicle is fitted with a carburetor, I believe it needs adjusting correctly, or with the Honda carb, it may be easier to replace it. If the vehicle is fuel injection carry out a diagnostic scan. Also make sure that all vacuum tubes are fitted tightly and that there are no cracks or broken joints. Regards John

Oct 19, 2012 | 1988 Honda Prelude

1 Answer

88 honda prelude double over head cam timing marks


there is a arrow on each cam lets call them north, you will also see marks at east and west to level cams, east and west need to be parallel were the head mets the valve cover while north points up done. Also there is a mark on the flywheel on the crank that needs to point north as well If you have the plastic cover on the lower you will see a plactic to line it up to.

Oct 12, 2010 | 1988 Honda Accord 4 Door

1 Answer

I cant find the timing marks on my 85 honda prelude i have the manual and it says they r on the crank case cover but its not there


Click on the following direct Link. It has the Timing Belt Diagrams with Marks for the Camshaft and Crankshaft AND Guidelines that you will need.
"Align Mark on Camshaft Sprocket with the Valve Cover Surface."
It also has a variety of other Diagrams for your future use.
Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com

http://www.2carpros.com/car_repair_information/year/1985/make/honda/model/prelude/1985_honda_prelude_timing_belt_diagram_marks.htm

Mar 20, 2010 | 1985 Honda Prelude

1 Answer

Hi can you please tell me how much a new or used motor would be to puchase and then the cost of getting it fitted for a honda prelude 88-89 model? and where do I get one. I live in brisbane south


You need the Honda B20A engine, it was used on their vehicles from 88-91 Preludes. You can get them on ebay several other places online. You can get them shipped to you in Australia. Good luck to you

Oct 16, 2009 | 1988 Honda Prelude

1 Answer

Timing belt


BEFORE U TAKE THE TIMING BELT OFF PUT THE CRANK SHAFT ON ITS MARK.IF THE CAM MARKS ARE NOT LINED UP THEN ROTATE THE CRANK 180.THEN U CAN MARK THE POSITION OF THE CAM & CRANK GEARS W/A CRAYON,WHITE OUT ECT.AS LONG AS THE GEARS DO NOT MOVE THEN U WILL BE OK.WITH THE OLD BELT ON U CAN SEE THE TIMING MARKS.

May 01, 2009 | 1983 Honda Prelude

1 Answer

Cambelt


You can download the entire manual from www.pdftown.com
Here is the link to the shop manual for the 88 prelude that I used to do my Cam Belt.
http://pdftown.com/Honda-Prelude-1988-Service-Manual.html
Hope this helps...

Apr 13, 2009 | 1988 Honda Prelude

1 Answer

Replacing engine of 91 3rd Gen prelude with a 88 3rd Gen prelude


if they both are the 2.0L they are the sme thing.

Dec 01, 2008 | 1990 Honda Prelude

Not finding what you are looking for?
Cars & Trucks Logo

545 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...