Question about 2006 Chrysler Town & Country

1 Answer

2006 Chrysler T&C dash lights don't come on, at night cannot see buttons or switches... Is this a fus isse, which one?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 63 Answers

It is most likely a fuse and it will be labeled as the instrument panel or running lights fuse. Sometimes it is connected with the cigarette lighter. Hope this helps!

Posted on Jul 30, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where in the fuse box is the fus for the radio


There also is a small 10 amp fuse on back of radio

May 10, 2016 | 2006 Chrysler Town & Country

1 Answer

Dash lights 2006


My 2006 kia Sorento ex .Instrument panel lights up when the headlights not on .I notice it when applied the brake mostly at night when park it in my driveway with engine off .

Jan 07, 2014 | 2006 Chrysler 300 Touring

1 Answer

Owners manual free


do the rest of the lights come on, like heater controls and radio display lights and you say sometimes, do they work at times and not? you listed this as a 1999 Chrysler LHS is this the correct model?

May 09, 2013 | 1999 Chrysler LHS

1 Answer

Chrysler Town & Country 2006 Electrical problem


Failed Battery is where I would start my testing

Nov 19, 2012 | Cars & Trucks

1 Answer

I have a 2006 bantam dash lights tail lights and front park lights not working checked fuses all ok


Hi,i had the same problem and last night i changed the complete light switch unit and all iss working now,so the light switch unit is faulty.

May 08, 2012 | 2006 Ford Bantam 1.6i

2 Answers

Dash lights don't work 1992 jeep wrangler


try turning the headlight knob left to right several times, and jiggle the switch at night. Also check your fuse panel should be a 10 amp or less fuse that says "Insr" or something like it.

Nov 11, 2011 | 1992 Jeep Wrangler

1 Answer

The dash lights turn on and off while driving at night. It appears they will go out and stay out one of these times! What's going on?


Problems of this nature are usually a loose or broken ground wire. The loose wire jiggles & wiggles around when the vehicle is in motion, thus, the wire touches & untouches producing the blinking dash lights.

Jul 06, 2010 | 2006 Chrysler PT Cruiser

1 Answer

What makes the break lights not work when the break peddle is depressed on my 2006 TP Cruser?


If the fuses and bulbs are ok, check the brake light switch, it's under the dash, near the top of the brake pedal. Press down on brake pedal and see if the button isn't stck in, if it is, tap on it, it should pop out.
The switch could also be bad.

Sep 30, 2009 | 2006 Chrysler PT Cruiser

1 Answer

No tail lights or dash lights fuse


check head light fuses.if all is good it could be head light switch.

Jul 04, 2009 | 2001 Nissan Altima

1 Answer

The alarm form my car is ringing with no reason at all....it is very anoiyng for everybody.would u know why? how can i fix this? i can/t even disconected coz i dont know where is it....i just disconect the...


Mine is the same, so I lock mine manually, using the rocker switch on the drivers door. Set all of the other switches to lock (use the power lock button) then open the drivers door to get out and before closing the door flick the rocker switch on the door to lock and shut the door. This makes sure the doors are locked but disables the alarm. You will notice that the red flashing light on the dash which lets you know that the alarm is engaged will not be flashing, the alarm is disengaged. Much easier than disconnecting the battery...
Read the manual to identify the power lock button from the manual door lock switch.

Nov 10, 2008 | 2006 Chrysler Neon

Not finding what you are looking for?
2006 Chrysler Town & Country Logo

142 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...