Question about Honda Odyssey
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I believe that light is accessed through the inside of the trunk.Remove the carpet from the back of the light housing & you will most likely find a bunch of plastic wing nuts that hold the taillight assembly on,remove them & push the housing out carefully,then the light bulb just twists out.
Posted on Mar 28, 2009
D problem is simply a lightbulb out on the cluster board.
Simple to remove the cluster and replace the bulb.
The Service Required light can be reset by
1) Turn they key to the II position
2) Turn the key to the off position, and push and hold in the odometer reset button
3) Turn they key back to the II position, while still holding the button.
4) After about 10-15 seconds, the light should go off.
Thanks for using FixYa - a FixYa rating is appreciated for answering your FREE question.
Posted on May 13, 2009
this is usaly a sing of waer on the transmission. cheak your tany oil for shiny particle or small papaer ones. any of that means your fritcion and metal clutch plates are going. and should be replaced.
Normaly this will only happen on cold starts, then it happen all the time, then it will be all gears after that, then you wont have 1 and 2 and slowly you wont have a working trany.
This is a must fix by a delar or trany shop. (trany shop will do it fast and cheeper but some times you wont get the warnenty
Posted on May 30, 2009
you will need
5/8 spark plug socket
3/8 extension (it could be 4in and longer)
and spark plugs factory plugs are pregap iridium
spark plug torque is 13.0 lb.ft
coil torque 8.7 lbf.ft
spark plug part # NGK 1zfr5k-11
# DENSO pkj16dr-m11
and spark plug anti seize on spark plug thread
what you need to do is remove the plastic cover 8mm socket or 10mm sockets
now remove the spark plug covers and remove the spark plug coils too 10mm head bolt you will need a 5/8 spark plug socket and a 3/8 ratchet and a 3/8's extension too
you need OEM spark plugs they work the best
hope this will help
Posted on May 22, 2010
Tips for a great answer:
Sep 12, 2015 | 2003 Honda Odyssey
Aug 24, 2015 | Honda Odyssey Cars & Trucks
Sep 30, 2014 | 1996 Honda Odyssey
Dec 29, 2013 | Honda Cars & Trucks
Jan 13, 2013 | 2002 Honda Odyssey
May 19, 2011 | 2001 Honda Odyssey
Jul 27, 2009 | 1997 Honda Odyssey
Apr 10, 2009 | 2004 Honda Odyssey
Oct 26, 2008 | 1995 Honda Odyssey
488 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: