Question about 1997 Geo Metro

1 Answer

1997 geo metro torque converter seal replacement how to remove seal and make sure we are removing only the seal.the car is a 1.3 l at.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 216 Answers

This seal is located in the front of the transmission. Its called a front input shaft seal. You will need to drop the transmission and remove the torque converter. Once the converter is off if you look at the shaft protruding from the transmission just at the base of the input shaft you will see this seal.
you can rent a seal remover from you parts store, IE Autozone or Oriely's and rent the seal installer tool. This will insure that you do not damage the seal housing or the seal when installing the new one.
One word of advice would be to take the torque converter to a transmission shop and have it checked before reinstalling it. If it has a worn seal face or has a bad set of blades you would be money ahead to replace it while your doing it the first time and not have to pull it back apart 3 months later.

Posted on Jul 30, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Bolt torque setting


which bolt>? there are hundreds.
the FSM covers all this.
so does alldata.com
log in and read it.
or look here.
http://geometroforum.com/site/

or
http://geometro.org/index.php

the real deals....

Aug 30, 2014 | 1997 Geo Metro

1 Answer

Torquing the head on 1.3 geo metro


1995 Geo Metro 1.3L TBI SOHC 4cyl

The Head Bolt Torque

54 Foot pounds (Final torque)Torque sequence ------------ ' 8 4 2 5 9 ' ' 10 6 1 3 7 ' ------------Final torque must be reached in 3 equal stepsRecheck final torque in sequence

Don't know what year hope this helps.

Feb 12, 2013 | Cars & Trucks

1 Answer

Engine starts but when drive is selected it shuts down the engine


Common issue would be torque converter is locked up. Replacement is required.

Feb 23, 2011 | 1997 Geo Metro

1 Answer

HOW DO I FIX FRONT TRANSMISSION SEAL AND HOW MUCH WILL IT COST?


You'll need to remove the transmission, the remove the torque coverter from the transmission, the seal is mounted in the transmission where the torque converter goes in. The seal is $10-$20. I a garage may charge between 2 and 4 hours of labor.

Nov 07, 2010 | 1993 Geo Prizm

1 Answer

How do i chage the fuel injector for a geo metro 1997 LSI?


REMOVAL & INSTALLATION Fig. 1: Removing injectors from fuel rail 84245032.gif
Fig. 2: Make sure injectors rotate freely in cylinder head 84245033.gif
  1. Relieve fuel system pressure and disconnect the negative battery cable.
  2. Remove intake air hose between throttle body and intercooler.
  3. Remove accelerator cable.
  4. Unclamp PCV and fuel return hoses from deliver pipe.
  5. Unclamp injector wiring harness.
  6. Disconnect injector coupler.
  7. Remove cold start injector pipe from delivery pipe.
  8. Remove vacuum hose from pressure regulator.
  9. Remove fuel feed hose from delivery pipe.
  10. Remove pressure regulator from delivery pipe.
  11. Remove delivery pipe with injectors.
  12. Remove injectors from delivery pipe. To install:
  13. Replace injector O-rings and lubricate with fuel. NOTE: Make sure injectors rotate smoothly. If not, probable cause is incorrect installation of O-ring.
  14. Check if insulator is scored or damaged. If it is, replace with new one.
  15. Connect delivery pipe with injectors.
  16. Install pressure regulator to delivery pipe using a new O-ring.
  17. Install fuel feed hose to delivery pipe.
  18. Install vacuum and fuel return hoses to pressure regulator and clamp securely.
  19. Install cold start injector pipe to delivery pipe using new gaskets.
  20. Install injector coupler. Clamp injector wiring harness.
  21. Install PCV hose to cylinder head.
  22. Install throttle position sensor coupler.
  23. Install accelerator cable and adjust free-play.
  24. Install intake air hose to throttle body and intercooler.
  25. Connect the negative battery cable.
  26. Start engine and check for leaks.
prev.gif next.gif

Jul 03, 2010 | 1997 Geo Metro

1 Answer

Having trouble with wiring of oxygen sensor


there should be a paper inside the parts box that tells you how to rewire the after market sensor

Jan 21, 2010 | 1997 Geo Metro

2 Answers

My 1995 Geo Metro 1.3 L leaks a lot of transmission oil. What is the problem?


Faulty oil seal, simple as that, where it is will be for a garage to find.

There are three main oil seals, one each side of the gearbox (CV driveshaft seals) and the other which requires gearbox removal is the torque converter to gearbox oil seal. Hope its not that one!!

PS = I trust the gearbox level is correct and NOT overfilled as this will also happen,. Has anyone recently topped up trans and spilled fluid??

Dec 03, 2009 | 1995 Geo Metro

1 Answer

Can't get old lower control arm off 1994 geo metro. stuck at ball joint.


remove ball stud bolts .then remove suspension arm bracket nut .remove suspension arm bracket bolts. remove rear bracket and suspension arm. torque ball stud nut 44 ft lbs torque suspension arm rear bolts 32 ft lbs.

May 05, 2009 | 1994 Geo Metro

1 Answer

Battery cables


Remove the connection from the battery. Remove the connection from the chassis. Replace part for part. Reconnect.

Be sure to wear saftey PPE (goggles, gloves, etc.)

Regards

Brian

Aug 14, 2008 | 1997 Geo Metro

Not finding what you are looking for?
1997 Geo Metro Logo

Related Topics:

257 people viewed this question

Ask a Question

Usually answered in minutes!

Top Geo Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8269 Answers

Are you a Geo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...