Question about 1997 Isuzu Rodeo

2 Answers

1994 isusu the dash lights and the rear tail

1994 isusu rodeo- the dash lights and the rear tail lights do not work but the flashers and the thurn signals work. Any advice?

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

My 97 Rodeo had the same problem. No Tail lights, no. Dash lights. There is also an annoying buzzer that goes with the set telling you the lights are on, there is no key in the ignition and your door is open. (you don't notice it when it's gone but you sure notice it when it's back)
The Fuse (taillight Illum) was good, The Light relay under the hood was good and all bulbs were good.
What fixed this problem was replacing the tail light relay which is located in a panel just to the left of the brake pedal also called the kick panel.Inside there are 3 relays. I replaced the one in the middle and got everything to work.
If you need to identify the relay you can put your hand over it and then turn the lights on and off. The correct relay should click. Mine was the middle one.
Hope this helps someone because it stumped me for months.

Posted on Mar 08, 2013

Ad
  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 26 Answers

Check the headlight switch, even though the headlights may work right the switching components inside the switch are separate

Posted on Jul 30, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Tail lights not working


ck fuse for rear taillights tis under the dash lower left of steering wheel. or if you still have the manual look in there under fuses.
also look for a bad ground but i doubt that.. if it's both rear out.
fast flashing well here's a chart with all sorts of info.
Problem What To Do Turn signals light, but do not flash Replace the flasher No turn signals light on either side Check the fuse. Replace if defective.
Check the flasher by substitution.
Check for open circuit, short circuit or poor ground. Both turn signals on one side don't work Check for bad bulbs.
Check for bad ground In both housings. One turn signal light on one side doesn't work Check and/or replace bulb.
Check for corrosion in socket. Clean contacts.
Check for poor ground at socket. Turn signal flashes too fast or too slow Check any bulb on the side flashing too fast. A heavy-duty bulb is probably installed In place of a regular bulb
Check the bulb flashing too slow. A standard bulb was probably installed in place of a heavy-duty bulb
Check for loose connections or corrosion at the bulb socket Indicator lights don't work in either direction Check If the turn signals are working
Check the dash indicator lights
Check the flasher by substitution One Indicator light doesn't light On systems with 1 dash indicator:
- See if the lights work on the same side. Often the filaments have been reversed In systems combining stoplights with taillights and turn signals
- Check the flasher by substitution On systems with 2 Indicators:
- Check the bulbs on the same side
- Check the indicator light bulb
- Check the flasher by substitution
hope this helps. may want to print for future reference. :)
hope this helps.

Dec 31, 2017 | GMC Suburban Cars & Trucks

1 Answer

What could be the cause of my 1994 Isuzu Rodeo to keep blowing the #1 fuse for the tail lights and dash lights?


More likely coming from the tail lite area. Check all bulbs, replace if the filament looks black, even if it works. Next look underneath car for wire(s) hanging or broken and grounding out on chassis or other metal. Must be something shorting the circuit to ground or a bulb drawing too many amps.

Oct 17, 2012 | 1994 Isuzu Rodeo

1 Answer

4 wheel drive will not work, light flashes on dash but locking in. 2002 isusu rodeo ls auto shift on the fly?


Hello and Welcome to FixYa.com



You need to have the codes read there is a sensor problem or mechanical



Thank you for using FixYa.com

Regards, Lee Davidian

Your FixYa Expert

Jan 13, 2011 | 2002 Isuzu Rodeo

1 Answer

Right rear blinker problem


CHECK PIG TAIL AT RIGHT REAR TAIL LIGHT IF LOOKS BAD OR BURN REPLACE IF OK FIND FLASHER UNDER DASH AND REPLACE.

Nov 04, 2009 | 1989 Ford Ranger

1 Answer

1994 Chevy truck. Turn signals do not work.


CHECK FUSE.IF GOOD YOU HAVE A BAD GROUND OR FAULTY TURN SIGNAL FLASHER.FLASHERS LOCATED ON THE INTERIOR FUSE RELAY BOX.

Sep 22, 2009 | Chevrolet 1500 Cars & Trucks

1 Answer

Dash lights-turn signal and rear lights


Access your fuse box and check the fuse labled- rear tail lgts,turn sgns, that fuse is blown, replace the fuse with the same value fuse, while your under there, on the fuse box or next to it you'll find 2 round plug in components, about the size of a Marshmellow, one of these is your flasher unit and the other is for your turn signals, replace both of these, even though one may work, it's just good sense to replace both, that shoud fix your rear lighting problem. good luck.....

Jul 11, 2009 | 1994 Ford Crown Victoria

2 Answers

Headlights work but dash lights and parking lights are dead


dash and tail sre tied together, so chk tail light fuse.

May 13, 2009 | 1989 Mercury Grand Marquis

1 Answer

Turn signals are not working


check for faulty signal light flasher located under L/S dash. Separate flasher for hazard lights and signal lights.

Mar 30, 2009 | 1994 Buick Park Avenue

Not finding what you are looking for?
1997 Isuzu Rodeo Logo

603 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

Marvin
Marvin

Level 3 Expert

81424 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22359 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14423 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...