Question about 2004 Chevrolet Aveo

Open Question

How to change front wheel bearings chev aveo 04

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 321 Answers

SOURCE: front wheel bearing 2004 escape 4x4

It's nearly impossible unless you have a good air compressor and a powerful 1/2" or larger drive impact gun.The reason is you have to remove the cv axle nut and axle out of the way before removing the bearing and hub.The axle nut requires a couple hundred foot pounds to remove.The procedure is:Jack vehicle safely off the ground,remove wheel and tire.Remove axle retaining nut.Remove balljoint nut and bolt,pry down on lower control arm,and disengage balljoint and lower arm from spindle.Now the axle can be released from the hub,but leave the other end of the axle in the trans,just set off to the side out of the way.At this point,there are two ways to change the bearing.The wheel bearing is a double roller,cartridge type with the hub containg the wheel studs,pressed into the bearing.Remove the entire spindle assembly from the suspension strut,OR leave the spindle attached to the strut,and remove the bearing and hub from the spindle.Some guys swear by taking the spindle to a press,and pressing the bearing assembly out with a bottle jack.I just use a bushing driver set,and ball peen hammer,and remove the hub from the bearing...then remove the snap ring retaing the bearing in the spindle,then drive the bearing out of the spindle with the hammer and drivers.There you have it.Reverse procedure for reassembly

Posted on Jul 11, 2008

Ad
emissionwiz
  • 77544 Answers

SOURCE: Change front wheel bearings

u will need to remove the brake cailper and the the brake rotor, then the hub retaining nut, that is a large metric nut, the bearing and hub must come off, then u will need to take this hub to a machine shop or the dealer and have the new bearing pressed in.
BCA/NATIONAL Part # 510078 moreinfo.gif {Ball Bearing Bore=1.5354" Outer Diameter=2.9134" Width=1.4173"}
Front Wheel PRICE: $47.99, PART SOURCE: Rockauto.com

3bcf37f.jpg

Posted on Mar 12, 2009

  • 420 Answers

SOURCE: 2005 Chev Uplander abs light on...I replaced two

Did you plug the sensors back up?

Posted on Apr 14, 2009

  • 1 Answer

SOURCE: hub assembly and wheel bearings problem

I just had my wifes replaced.[4x4 blazer S-10] Chev want 300.00 for each, I went on line and got the parts cheap and a friend from chev put them on in his garage. I think the whole thing cost me 200.00

Posted on Jan 11, 2009

  • 543 Answers

SOURCE: 1996 saturn sl front wheel bearing assembly

you got to press it in and out,and if u dont do it right with the proper tools you will wreck the hub

Posted on Oct 04, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wheel bearing for 2005 chevy aveo front


wheel bearings on the aveo are pretty inexpensive and easy to replace.

Oct 10, 2012 | 2005 Chevrolet Aveo

1 Answer

I have no manual for the car, can you tell me where the transmission dipstick is for the 04 chev aveo? and can you change the oil for a manual transmission in this car. Please Sue


There is no dipstick for a manual transmission. It is a drain and fill system that is on the bottem and bottem side of the transmission

Jun 02, 2010 | 2005 Chevrolet Aveo

1 Answer

How to add manual transmission oil or additive to a 04 Chev Aveo.


Right into the dipstick tube i know it sucks use a good funnel

Jun 02, 2010 | 2005 Chevrolet Aveo

1 Answer

Chey aveo front hub bearing what is this?


yes front wheen drives have hub bearings. Most of them need the hubs to be pressed apart to replace them. the hub bearing supports the end of the CV drive shaft closest to the wheel. hope that helps.

Mar 17, 2009 | 2004 Chevrolet Aveo

1 Answer

Wheel Bearings


NO they come as an assembly with ABS sensor

Jul 30, 2008 | 1999 Chevrolet Malibu

Not finding what you are looking for?
2004 Chevrolet Aveo Logo

Related Topics:

938 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

77544 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...