Question about Scion xB

Open Question

We have a 2005 Scion XB and the fob/remote control is the problem. When you press unlock, the panic alarm goes off. We verified with both controls, renewed both batteries and the panic alarm still goes off when the open button is pressed. The local Toyota dealers keep insisting its the Fob/remote control, change the battery, now even saying that you need to purchase 2 new controls, its worn. Before we decide this (local dealers here charge $150.00 each genuine Scion remote control) we thought we'd check the internet and see if anyone else experienced this and what was their solution. We'd really appreciate your help.

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
pittmanc
  • 194 Answers

SOURCE: 2004 Kia Optima - Key Fob

you need to reprogram it ok this is what you do turn the key to the on position but do not crank it take the clicker and aim it at the lower dash driver side of sterring wheel press the lock button a few times then turn off key remove key and try clicker this should fix it

Posted on Dec 05, 2008

Ad
alicantecoli
  • 22156 Answers

SOURCE: How do I program S Type Jaguar key fob Year 2000 Jag ?

jaguar dealer only encrypted software

Posted on Dec 28, 2008

carsandcomps
  • 722 Answers

SOURCE: 2005 dodge durango key fob

Hello and thank you for choosing fixya.com. I would suggest taking your vehicle to a local auto parts store and request to have a diagnosis done. (while auto stores vary, this is usually a free service and only takes a couple minutes to complete) to see if any codes are brought up. If so, the representative can tell you what the codes mean, and what needs replaced or repaired. Let them know of the situation. Even if no codes show up, ask them to clear the codes. If this does not work, do the following. 1: make sure that the batter in your key fob is inserted correctly, and that it is the correct size and type. 2. Disconnect the + Positive cable on your battery. This will reset your the vehicles computer. Maybe this will allow the vechile to code up with the fob. If not, I would take it to dealership, or backto an auto part store for further assitance.

I thank greatly for choosing fixya.com. I hope this information is useful to you and helps you get your fob working again. Let me know if you need further assistance, or have any questions or comments. Feel free to rate this information at your earliest convenience.

Posted on Apr 01, 2009

  • 101 Answers

SOURCE: need help to remove 2005 Scion xB water pump

1st ...that should be covered under 6 year 50k power train warranty from the dealer.
But if your over....you need to unbolt the right side motor mount (on the water pump side) and lift the engine some with a floor jack to get clearance,

Posted on Apr 11, 2009

baccardo
  • 150 Answers

SOURCE: Programming a key fob

you will need the dealership diagnostic tool to program the remote

Posted on Apr 24, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Panic alarm does not work. Locksmith verified that it is not the remote fobs.


central timer module" - Dodge Dakota Forum

www.dodgedakota.net/boards/gen/21983.html

Jan 2, 2009 - 21 posts - ‎18 authors
I have a Dak 2000 3.9 Ltr V6, Single Cab, Bare Bones. ... Panic Mode .... ooops....i mean the remote entry and alarm system does NOT work ... i have a 2002 dakata where can i buy a ctm looked all over nobody sell them can thay be rebuilt ... I was out the door $550.00, and they washed the truck also.

Truck wont work/Key Fob won't work/wont start/wont do anything ...

www.ramforumz.com > ... > Electrical

Apr 10, 2010 - 10 posts
Truck wont work/Key Fob won't work/wont start/wont do anything! ... Maintenance & Repair > 3RD Generation Dodge Ram - 2002 to 2008 Dodge Ram Trucks > Electrical... Soon as I manually unlock the door, and open it.... the factory panic alarm starts going off. .... Vehicle: 2004 Dakota Club Cab 4X4.

alarm going off when opening the door.. embarrassing and annoying ...

www.cumminsforum.com > ... > 3rd Gen. Non-Powertrain

Jan 12, 2012 - 11 posts - ‎9 authors
how do I stop my trucks alarm from going off when I open the door? it did it ... to thetruck and opened driver door (it was unlocked) and the alarm started going off. ... I do not have a remote unlocking device (or it doesnt work) so I do all .... alarm will go off then I have to use the FOB panic button to shut it off.

Keyless entry/panic button/alarm - Dakota Durango Forum

www.dakota-durango.com > ... > Gen III Dakotas

Jan 10, 2016 | 2002 Dodge Dakota Club Cab

2 Answers

Remote starter only allows my starter to turn over twice; needs at least 3 with my key. How to adjust to have it starter run longer on remote?


I know you are looking to have the remote starter run a third time but I would say you need to look at your Fuel Pressure Regulator on the Scion. Sounds like it is not holding fuel pressure at the fuel rail and that is why it requires a third Crank

Jan 05, 2016 | 2006 Scion xB

2 Answers

Security alarm starts honking randomly when car is locked.


Next time Use your key and unlock then lock the doors again .

Jun 23, 2015 | 2002 Lexus ES 300

1 Answer

I just installed a 4103 remote start in my 05 scion xb. I haven't hooked up the door lock/unlock, or the Orange wire yet. I wanted to make sure the unit worked and I can't get it to st


first off you should have a dealer that installers the alarms, that way they would of ordered the correct alarm system, that way all would work

Sep 21, 2014 | 2005 Scion xB

1 Answer

Changed the battery in a scion xa and the alarm keeps going off when the battery is connected back


Scion XA PDF Manuals online Download Links at Scion ...

scionmanuals.com/scion-xa-pdf-manuals-online-download-links/
Here at Scion XA PDF Manuals online Download Links page,intended to offer Scion XA Owners available Electrical ... Scion XA 2004,2005,2006,2007,2008:

How To Replace Scion XA Key Fob Battery 2004 - 2006 ...

? 1:45
www.youtube.com/watch?v=1AWHK_flb9s
Aug 4, 2014 - Uploaded by Keyless Entry Remote Inc
This video will show you how to replace a key fob battery for a 2004 2005 & 2006 Scion XA.

Jan 21, 2013 | 2005 Scion xA

1 Answer

I bought a honda civic sport 2005 got it resprayed and i built it up and now the alarm keeps going off the key fob doesnt work etheir the battery has been flat . does any body no how to reset the fob or...


Programming
When
Remote control added or replaced. System malfunction.
How
Obtain all remote controls. A maximum of 3 remote controls can be programmed. Switch ignition ON. Repeat procedure below 3 times: Within 4 seconds: Press lock or unlock button. Within 4 seconds: Switch ignition OFF. Within 4 seconds: Switch ignition ON. Within 4 seconds: Press lock or unlock button. System should now lock or unlock vehicle. Within 4 seconds: Press lock or unlock button. Within 10 seconds: Press lock or unlock button of first remote control. System should now lock or unlock vehicle. Press lock or unlock button of second remote control. System should now lock or unlock vehicle. Press lock or unlock button of third remote control. System should now lock or unlock vehicle. Switch ignition OFF. Remove key. Check operation of all programmed remote controls.
IMMOBILIZER CAN ONLY BE SET BY DIAGNOSTIC EQUIPMENT

May 13, 2011 | 2005 Honda Civic

1 Answer

Alarm goes off when trying to remote start my o 06 malibu was up!!!


i hav same problem chaged battery noticed battery holder was loose so i soldered it very carefully everything works fine xcept remote start alarm just goes off like when you push the panic button not sure what happened dont think i shorted out the circuit board in the fob if engine light is on this car wont start via remote these remotes must b progamed by dealer or pro shop prob using what they call a tech II computer to remote start you hav to press lock button 1st even if car is already locked i figured this out pess and hold lock button then press start alarm dont ring and the car starts.

Jan 13, 2010 | 2005 Chevrolet Malibu

1 Answer

2005 key fob controls do not open locks


The key fob will have a very small opening along the seam. Use a small flat head screwdriver to prey the seam apart.

Sep 05, 2009 | 2005 Scion xB

1 Answer

Driver's side door lock not responding to keyless remote or to interior switch - 2004 Scion xB


I had that issue with my scion xb. When I installed my audio system somehow the vibrations loosened the button wires clip . I removed the door panel and clicked it back in, also it could be a dead solenoid or disconnected door wire that goes from the 'noid to the door lock pin.

Aug 03, 2009 | 2005 Scion xB

2 Answers

Key fob will not undo cetral locking or disable car alarm changed battery in key fob still having no luck any idea who can re code key fob to central locking and alarm?


If you don't have one that works for the vehicle now, you'll have to take it to your local dealer to have it programmed to the vehicle. Some will charge for this, some will do it at no charge.

If you do have a remote that is programmed and working for the vehicle, then the following steps will allow you to program another remote:

1. Enter vehicle and close all doors.

2. Put seatbelt on (or clip it into the buckle) to shut the warning buzzer off.

3. Put key in ignition, turn to run position but don't start it.

4. Press and hold the unlock button on the working key fob and hold for 4 seconds, then also press the panic button.

5. Release both buttons and you should hear a single chime to indicate it is in program mode. You have 30 seconds after the chime to program any additional remotes you want to program.

6. Press and release both the unlock and lock buttons simultaneously on the remote you are programming. You should hear another single chime.

7. Within 4 seconds after hearing the chime, press either lock or unlock button on remote that you are programming.

Oct 16, 2008 | 2001 Chrysler PT Cruiser

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

96 people viewed this question

Ask a Question

Usually answered in minutes!

Top Scion Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Brad Brown

Level 3 Expert

15628 Answers

Are you a Scion Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...