Question about 2001 Hyundai Elantra

1 Answer

My high beams will not adjust up and down on the drivers side on my 2005 hyundai elantra

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,793 Answers

If the adjusters are sticking spray them with wd40 or give them a wiggle after loosening the screws....poss just rusty...

Posted on Jul 30, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Passenger side low beam doesn't work. Notice bulb is out. Replaced bulb but still doesn't work. High beam works fine. No problem with driver side. Is there a fuse for the left side?


No you must have a wiring problem if the bulb is good. You can test the bulb out of the car. Do not touch any halogen type bulb with your bare skin.

Dec 09, 2014 | 2005 Hyundai Elantra

2 Answers

How do you change a front headlight on a 2005 hyundai elantra


This is an 'inside' job. Open the hood and you will see on the back of the light a clip. Remove this and the bulb will fall out. BUT you should wear gloves to replace the new bulb! Never touch it with bare hands! This is not an easy job! You will more than likely think you have the wroung part!

Mar 27, 2010 | 2005 Hyundai Elantra

1 Answer

Can't find headlight adjustment screws


They nuts should be located either on the top of the headlamp assembly, behind the headlamp assembly, or near the frame rail by the radiator support.


Park your car on a level ground 30 feet from a wall and measure the height from the ground to the bulb and mark on a wall (do this for highs beams and low beams if the bulbs are separate, if highs and lows are the same bulb, only do it for the lows)

If the headlights read VOR, then aim the brightest part or cutoff part just below the mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall.

Sep 17, 2009 | 2005 Hyundai Elantra

2 Answers

My low beam lights sometimes stop working i still have high beam and daylight runing lights after a while they come on.2009 elantra dealer can't find problem.


when the low beams quit try switching from high to low and back and see if low beams stay on, if they do it may be the dimmer switch, if that doesn't change anything suspect the headlight switch.

Sep 02, 2009 | 2009 Hyundai Elantra

1 Answer

Adjusting the low beam headlight on a 2003 Hyundai Elantra


thats it my freind one on each side/Plaes rate my response thank you very much

Jan 30, 2009 | Hyundai Motor 2003 Elantra

1 Answer

Adjusting the low beam headlight on a 2003 Hyundai Elantra Adjusting the High beam headlight on a 2003 Hyundai Elantra


its all the same the headlight is a complete unit you adjust both/ look for screws behind the headlight one each side one is for horizontal annd the other is for vertical Please rate my response thank you very much

Jan 30, 2009 | Hyundai Motor 2003 Elantra

1 Answer

Headlight Adjustment


their are either torx screw above or below the headlight back cover one is for up and down and the other for rt and lt

Jan 24, 2009 | 1987 Hyundai Excel 4-Door

1 Answer

Adjustment headlights '02 Hyundai Elantra


The adjustment screws/nuts should be located either on the top of the headlamp assembly, behind the headlamp assembly, or near the frame rail by the radiator support.

You will have vertical adjustment screws for each independent beam (separate highs and separate lows, but will be same screw if highs and lows are the same bulb). You may also have additional horizontal adjustment screws as well

Park your car on a level ground 30 feet from a wall and measure the height from the ground to the bulb and mark on a wall (do this for highs beams and low beams if the bulbs are separate, if highs and lows are the same bulb, only do it for the lows)

For Low Beams: If the headlights read VOR, then aim the brightest part or cutoff part just below the mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall.

For High Beams (if separate from low beams): Aim the headlight directly at the line you marked on the wall.

Jan 23, 2009 | Hyundai Motor 2002 Elantra

Not finding what you are looking for?
2001 Hyundai Elantra Logo

Related Topics:

82 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...