Question about 2002 Chrysler Sebring

Open Question

Where is the ac low pressure port on my 2002 chrysler sebring v6

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 202 Answers

SOURCE: 2002 Chrysler Sebring Oil pressure light

Could be a bad oil pressure switch, or a bad oil pump. Both will cause this issue. Hope it is the switch b/c the oil pump is a costly repair.

Posted on Mar 26, 2009

Ad
emissionwiz
  • 76846 Answers

SOURCE: AC low pressure port 2001 Ford Ranger 3.0L

not sure about the color, but the low press charging port is in the large AC line, the one that gets cold, the small line is the high pressure line.

Posted on Apr 23, 2009

  • 2 Answers

SOURCE: replace air filter 2002 Chrysler Sebring convertible

you need to loosen the clamp on the throttle body and unplug the map sensor then there are two clips on the other end pull that out and you should be able to pull the filter out you don't need to take the box off.

Posted on Apr 28, 2009

  • 1 Answer

SOURCE: WHERE IS THIS PORT LOCATED?

Yes, on my 2002 xl-7 the low side port is behind the grill as ibass215 says. The cap is light green and marked with an "L". Thanks Susuki, couln't you find a more hidden place?

Posted on Sep 06, 2009

01fordeb
  • 1033 Answers

SOURCE: oil sending unit on 2004 chrysler sebring V6

Should be located close to the oil filter. It will screw in like a spark plug. It has a harness plug. Easy to change, save yourself $70 in labor. You will need a fairly large wrench to remove

Posted on Jan 03, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the location of the AC Schrader Valve on 2008 Chrysler Sebring LX 2.4L?


There are two valves of different sizes 1 high pressure and 1 low pressure. You should see two silver tunes coming from the radiator are usually on the passenger side of the car follow those ac lines and each one will have a valve on it. There should be a cap on each one. Most cars have them near the front of the car but on occasion they have been on the back by the firewall.

Jul 07, 2016 | 2008 Chrysler Sebring 2.4

1 Answer

How can I replace a bad fuel module o-ring 2002 Sebring 2.7L v6


sorry dont think you will be able to check this link out he's the chrysler expert
How to Replace Fuel Pump in Chrysler Sebring eHow

Mar 29, 2014 | 2002 Chrysler Sebring

1 Answer

Ac is not working in my 2008 Chrysler Sebring. We checked all the fuses, and tried to recharge the AC, but indicator said that the freon is full and there are no leaks. at this moment it is just bowin


Check the A/C compressor relay . Also ck the low pressure switch for the A/C system . you can unplug the low pressure switch and jump it with a paper clip to rule that out . Ck the A/C compressor fuse if you haven'y already

Aug 05, 2012 | 2008 Chrysler Sebring

1 Answer

How to recharge ac


There are at least two ports on the ac lines in the engine compartment that are covered with black caps. One is bigger than the other to help prevent you from connecting to the wrong side of the compressor.

Jul 01, 2012 | 2002 Chrysler Voyager

1 Answer

2002 chrysler sebring 2.7ltr timing mark diagram


the 02 sebring does not list a 2.7L it had 3 engine codes a 2.4L 4cylinder vin# G 2.4L 4 cylinder vin# B or X and a 3.0L V6 SOHC ? recheck what you have and get back with me.

Sep 29, 2011 | 2002 Chrysler Sebring

2 Answers

Where is the water pump in chrysler sebring 2002 .v6 2.7


2002 2.7 engine, the timing belt turns the water pump

Sep 10, 2011 | 2002 Chrysler Sebring

1 Answer

1996 Sebring convertible locating low pressure port on the a/c? Where is it?


The smaller of the two lines is the high pressure line. The larger line is the low pressure line. The cap on the fitting should be blue in color on the low pressure side. Hope this helped and best wishes.

Aug 06, 2009 | 1996 Chrysler Sebring

1 Answer

2002 Chrysler Sebring Oil pressure light


Could be a bad oil pressure switch, or a bad oil pump. Both will cause this issue. Hope it is the switch b/c the oil pump is a costly repair.

Mar 26, 2009 | 2002 Chrysler Sebring

Not finding what you are looking for?
2002 Chrysler Sebring Logo

Related Topics:

533 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8548 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...