Question about Mercedes-Benz CLK

1 Answer

I have a 2001 clk 430 mercedes, I am not able to unlock the truck with the key or the remote keyless entry. I believe the fuse is ok and the interior swith does not seem to do anything. HELP!!

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 417 Answers

Hi,
Im a novice at mercedes's and I dont know if its a convertible or not but if it isnt you can try to take out the back seat and see if theres a way back there that way. study how the back seat is attatched, usually the bottom is just clipped in but it may be bolted. that part usually comes out first then the top part. if you can get back there take a pair of plers or needle nose with you and a flashlight and study the lock mechanism from the inside and your looking for a bright silver link in between the lock mechanism and where the key goes, it may be different and there may even be an emergency release there. try some wd-40 or equivalent on the mechanism, hopefully something just got jammed in there somehow. hopefully that helps
good luck
jm

Posted on Jul 29, 2010

  • Jude Meredith
    Jude Meredith Aug 06, 2010

    hi,


    just thinking, if its a convertible..
    you could try to disconnect the battery when your top is at mid cycle to gain access possibly or if the battery is in the trunk try locating and pulling the convertible top motor fuse after its begun cycling the top up or down to possibly gain access to the rear area, just some more ideas for you. someone told me this worked for them, but not sure if it was a mercedes..


    jm

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I remove the lens to Change backup light 2001 clk 430 convertible


I believe you do not remove the lens - rather you open the trunk and find the back of the lamp (you'll have to remove the panel in front of it) and remove and change the bulbs from inside the trunk.

Feb 13, 2015 | 2001 Mercedes-Benz CLK-Class

1 Answer

Keyless entry stopped working


This is common on the CLK 500, but usually its just that the remote control wears out. I have changed mine twice already in 70,000 miles. Buy a new remote key fob and it likely will solve your problems if a simple battery change did not do the job. Always try that first and use top grade batteries, not those from the dollar store, because they fail too soon.

Dec 04, 2013 | 2006 Mercedes-Benz CLK 500

1 Answer

I have a 2002 clk 430 amg Mercedes benz and my remote key doesn't do anything at all. it will not lock or unlock doors, open the trunk or turn over in the 2 position to crank my car. all the lights come...


The remote key has a 2 coin batteries fitted. These may have gone flat. Point the keyfob at the car and watching the key press the unlock button. On the key fob there should be a small LED light which blinks. If not, the batteries need replacing. Try this YouTube video. I think they are CR2025 type batteries.

Jan 26, 2018 | 2003 Mercedes-Benz C-Class

1 Answer

My powerlocks on my mercedes 2000 s500 wont repond to my keyless entry


REMOTE KEYLESS ENTRY BATTERY IS WEAK OR DEAD.YOU HAVE TO LET DEALERSHIP REPLACE KEYLESS ENTRY AND REPROGRAM IT TO UNLOCK OR LOCK DOORS.

Oct 17, 2009 | 2000 Mercedes-Benz S-Class

1 Answer

2001 subaru impreza WRX unlocking doors with key


usually after opening the door you can deactivate the alarm by pushing th unlock button or simply insert keyy in ignition and turn it on.

Aug 13, 2009 | 2001 Subaru Impreza

1 Answer

Key Pad Entry does not work


does the key pad light when you press a button at night? If yes, the fuse is ok.
Do you have the plastic card with the permanent code in your owner manual packet? If yes, tryit.
report back.

Keyless Entry The keyless entry keypad is hardwired to the GEM. The GEM interprets the inputs from the keyless entry keypad and then controls the associated operation. The keyless entry keypad will be illuminated for five seconds when any button is pressed. Additionally, it will request the illuminated entry feature to turn the courtesy lamps on. If a lock all doors code is entered, the illumination will turn off, as well as request the illuminated entry feature to turn off the courtesy lamps. When pressed, the keyless entry keypad supplies the ground signal to the GEM or the GEM receives a signal from the keyless entry remote transmitter. Then the GEM outputs a ground signal to the appropriate lock or unlock relay which supplies the power to the actuator to lock or unlocks all doors, including the luggage compartment. The keyless entry remote transmitter also unlocks the liftgate or activates the panic alarm by sending a signal to the GEM.
--------------------------------------------------------------- Visual Inspection Chart Mechanical Electrical
  • Keyless entry keypad
  • Keyless entry remote transmitter
  • Central junction box (CJB) Fuse F222 (20A)
  • Circuitry
  • Generic electronic module (GEM)
------------------------------------------------------------------------
  • No communication with generic electronic module (GEM)
  • Generic electronic module.
  • Circuitry.
  • REFER to Section 419-10 .
------------------------------------------------------------------------------------

Mar 08, 2009 | 2003 Ford Taurus

1 Answer

Keyless reprogram


resychronizing the key works.

1. Insert key into ignition and turn to
position 2.
2. Remove key and hold down lock button
while pushing unlock button five times.
3. Release all buttons, then push either lock or
unlock button.
!!!!!!!!!!!!!Procedure must be completed within10
seconds.!!!!!!!!!!!!!!!!!!!

Oct 06, 2008 | 2001 Mercedes-Benz M-Class

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

184 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Marvin
Marvin

Level 3 Expert

81285 Answers

Joseph Prosser

Level 3 Expert

772 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...