Question about 2007 Chevrolet Suburban Three-Quarter-Ton LS
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
this is a problem that happens alot you have to use an impact driver for this and a impact torx bit. the driver is a cylinder shaped tool with a 3/8 drive head. you get the impact torx the the impact driver and a hammer. the tool is inexpensive and will do the trick.
Posted on May 09, 2009
SOURCE: Rear climate control
check and see if your rear control is working for the radio, if not: that could be your problem. All of the power for the rear of the envoy is controlled by this module.
Posted on Feb 26, 2010
check the wireing with a test light if that dosent tell you any thing you might need to replace motor or see if its connected to the motor
Posted on Apr 02, 2010
Tips for a great answer:
Dec 20, 2016 | 2007 Buick Lucerne
Dec 09, 2013 | Chevrolet Suburban Cars & Trucks
Sep 28, 2012 | 1999 GMC Suburban
Aug 23, 2011 | Chevrolet Suburban 2500 Cars & Trucks
If you touched any of the A/C controls within 45 seconds of starting your Suburban (after the battery change), you messed up the 'calibration mode' of the HVAC.
Pull the HVAC fuse (10amp) under the hood, and pull the two adjacent fuses (30 and 10amp) under the dash listed as 'climate control' in the manual.
Push the fuses back in, restart your car, but DONT TOUCH ANY of the A/C controls for 90 seconds.
I bet the A/C starts working again normally.
May 06, 2010 | 2003 Chevrolet Suburban 1500
Sep 19, 2009 | 2003 Chevrolet Suburban 1500
Sep 08, 2009 | 2002 Chevrolet Suburban
Oct 15, 2008 | 2005 Chevrolet Suburban
165 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: