Question about 2001 Buick LeSabre
The heated, automatic driver's side glass mirror on a 2001 Buick LeSabre has become cloudy and needs to be replaced. How do I just replace the glass and not the whole housing?
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
first disconnect the battery then check how the serpentine belt is lined up so u can take it off and put back on. Then the pump should be on the side of the motor with 9or12 bolts there could be more! after taking out take razorblad and skrap the old gasket clean wipe of then put new gasket and pump back on dont over tighten the screws cuase the pump my be aluminum.
Posted on Mar 19, 2009
kind of tricky, took me an hour to get it figured out, but you got to opend the trunk and take out the 10 or so 10mm nuts sticking out of the backside of the lid, then the whole solid piece where the lights are on the back will slide off, then you can change the bulbs above the license plate and put it all back together
Posted on Mar 20, 2010
Remove the sight shield from the fuel rail. (it's the large plastic shield that dresses up the engine) As you stand in front of the car the alternator is located on rear left side. In front of it is an electrical connector to the MAP sensor. Remove it. Press the PCV valve cover down and rotate it 1/4 turn counterclockwise. It is actully on the intake manifold. Lift the cover, the upper O-ring and the spring from the housing. Remove the pcv valve and the lower O-ring from the intake manifold.
Posted on Mar 23, 2010
Tips for a great answer:
Nov 06, 2017 | Buick Cars & Trucks
Aug 04, 2015 | 2001 Buick LeSabre Limited
Oct 15, 2014 | Buick LeSabre Cars & Trucks
Aug 29, 2012 | Buick LeSabre Cars & Trucks
Sep 28, 2011 | 2000 Buick LeSabre
Push the mirror lens upward so it faces the roof of your Buick LeSabre.
Place the eight-pointed star head of the Torx driver into the setscrew located in the base of the rearview mirror. Turn the Torx driver counterclockwise. This releases the clamping pressure on the mirror.
Slide the mirror upwards to remove it from its metal bracket.
Place the base of the replacement mirror against the windshield, directly above the metal bracket. Slide the mirror down into the bracket. The bracket has a groove on each side into which the mirror will slide.Secure the mirror to the bracket by tightening the setscrew clockwise with the Torx driver.
May 04, 2011 | 1999 Buick LeSabre
Apr 04, 2010 | 2001 Buick LeSabre
Dec 09, 2009 | 1999 Buick LeSabre
Dec 29, 2008 | 2005 Buick LeSabre
571 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: