Question about 2000 Alfa Romeo 156

1 Answer

Abs light and and handbreak light on

Abs light and and break light on, i hear it may be a problem with the abs sensor unit. any help? mechanics are lost

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,489 Answers

As far as being able to test the wheel speed sensors, they can disconnect the end so that they still have the sensor at the wheel hooked up. Act like they are going to change it and see where it connects. Once you have the connector in your hand and the sensor is still atatched at the wheel, have someone spin the wheel and with a voltmeter, see if you are getting an AC voltage reading(yes AC not DC). If any sensor does read AC voltage, replace that sensor. Let me know what you find.

Posted on Jul 29, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sebring to A Neighborhood Mechanic Due to a ABS light n I took my 2000 Chrysler Sebring to A Neighborhood Mechanic Due to a ABS light n brake light on my dashboard n he told me it was the REAR ABS...


I'm sorry to say you need trained help or a good DIY neighbour to get to the bottom of this.; The ABS sensors on the rear brakes will not lead to air in the brakes or grinding of the brakes. It sounds like you have an ABS pump fault in the main unit. This can cause the brakes to hang up after releasing the pedal. The rear wheel ABS sensors may only need their mounting positions cleaned up and their location to the brake reset, this can be as little as 1-2mm. I'm sorry for your financial situation but you are going to need help and my advice is don't drive the car until you have it fixed. Your life or someone else's is in your hands.

Nov 06, 2014 | Cars & Trucks

2 Answers

2000 taurus ABS light is on what is the cause?


There are a few possibilities for this and all of which you will have to get your mechanic to look at.
1. Faulty sensor
2. Faulty sensor ring
3. Faulty module

Sep 18, 2014 | 2000 Ford Taurus

1 Answer

Passat 03 handbreak light


This may be caused by low fluid in the master cylinder. Try topping up the master cylinder with fresh brake fluid that's recommended for your vehicle. 1_10_2014_2_26_42_am.png

Dec 17, 2013 | Cars & Trucks

1 Answer

Abs


sounds like the anti lock pump is gloing out

Oct 27, 2012 | 1998 Chevrolet Blazer

1 Answer

My traction control light as well as ABS and service light came one brought it to the mechanic this morning and he scanned it couldn't find anything light came offf and he told me it could be the abs...


Depending on vehicle it is I'd be looking for a bad front wheel bearing. The hubs come with a new sensor anyway. Once the bearing is worn it changes the air gap between sensor and exciter wheel and can give a false reading to the ABS unit. Has your ABS ever activated when coming to a stop sign (even when the roads are dry?). Do you hear a loud humming noise on highway?

Jan 05, 2011 | Chevrolet Cavalier Cars & Trucks

1 Answer

Same problem. ABS light, Brake ligth. Speedometer not working. I un hooked the nbattery for a while and all seem to be woring for now? Any ideas


Hi these trucks are know for the front hub bearings to fail., the wheel speed sensor is located in side of them and serviced as a unit. Mostly the set the abs light while doing slow turns your will hear the abs motor and feel the break pedal pulsate.

Aug 30, 2010 | 2000 Chevrolet S-10

1 Answer

ABS problem with GMC 2002 Sierra


its a low speed abs activation the problem is in the front sensors they need to be cleaned or replaced they [or one] probably has some corrosion on the sensor --[the 99 chevy tahoes had a limited recall over this issue and the fix was to remove and clean the abs sensor or if to corroded replace ] this problem doesnt set off an abs code or trouble light also sometimes the abs will activate by itself at under 4 mph without even touching brake

May 15, 2010 | 2002 GMC Sierra

1 Answer

Tcs light come on along with abs an hand break light


You most likely knocked the electric plug loose when you changed the brakes, go back and make sure they are tight.

Jul 24, 2009 | 1999 Mazda 626

1 Answer

1994 Audi 80 2.0 ABS Light Comes On then Engine Cuts Off


abs fault if you feel it though the pedal its activating, it should not activated, you will probably need to replace the abs unit as it would be the valve in the pump. engine cuts out as its found a fault.

Jun 07, 2017 | 1992 Audi 80

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

279 people viewed this question

Ask a Question

Usually answered in minutes!

Top Alfa Romeo Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

76070 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

896 Answers

Are you an Alfa Romeo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...