Question about 2000 Hyundai Accent

Open Question

NO SPARK KINDLY ASSIST!? HYUNDAI ELANTRA J2 1600 1998, ENGINE SWOPPED WITH 1.8 IDENTICAL ENGINE. CAN'T GET SPARK. FITTED NEW COIL PACK & CRANK SENSOR & NEW RELAYS. NO SPARK AT ALL....

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
emissionwiz
  • 76109 Answers

SOURCE: Service Engine soon light Code P0133

In most cases this means the O2 sensor is defective.

Posted on Dec 11, 2008

Ad
Ajkill
  • 2035 Answers

SOURCE: Location of camshaft position sensor on a 2001 Hyundai Elantra wL

The camshaft position sensor is located on the engine near the timing belt cover and under the upper radiator hose.

Posted on Dec 26, 2008

  • 1 Answer

SOURCE: hyundai elantra j2 model 1995

Most of the Public Libraries have all Hyundai manuals

Posted on Mar 04, 2009

  • 16 Answers

SOURCE: 2002 Hyundai Elantra not starting

check fuel pump

Posted on Mar 14, 2009

  • 1 Answer

SOURCE: temperature control switch 1998 hyundai elantra

a/c not blowin cold sometimes

Posted on Apr 20, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hyundai 1.6 Elantra gls, does the spark come from the cylinder head or the crank shaft


neither
the crank shaft position sensor triggers the ignition control module that generates the spark either internally or through a coil/ pack
the cam position sensor ok, s that process to prove that the cam shaft is turning correctly

Apr 13, 2017 | Hyundai Cars & Trucks

2 Answers

How will i know if the coil is dead on my hyundai elantra 1997 1.6 gls


Pull the coil off and install a spark plug in the boot, then ground the plug and crank the engine you should see a spark. If not he coil may be the issue or the wiring to it or the powertrain module that controls it.

Jun 13, 2016 | 1997 Hyundai Elantra

1 Answer

How do I arrange my spark plug wires on my Hyundai Getz go 2002


How to change spark plugs hyundai accent 01 - 05 - YouTube

? 3:18
https://www.youtube.com/watch?v=tU2vwisJ7v4
Feb 16, 2012 - Uploaded by PNBNC
I filmed this right after changing my old plugs, I figured it was easy enough to film and some people can profit from it. for a ... Coil, you mean wire lol ... When you go to put the spark plug back in, never start it with the ratchet.

How To Replace Change Install Spark Plugs 2001-06 ...

? 3:17
https://www.youtube.com/watch?v=yVV2KcPDFIo
May 14, 2013 - Uploaded by 1A Auto Parts
... spark plugs. This video is applicable to the 2001, 2002, 2... ...spark plugs. This video is applicable to the 2001, 2002, 2003, 2004, 2005, 2006 Hyundai Elantra 2.0L. ... +queentonks A little know-how can go a long way. We're glad ... When do you think is good to replace my spark plugs wires? My spark ...
2001 Hyundai Accent Firing Order: Engine Mechanical ...www.2carpros.com/.../hyundai-accent-2001-hyundai-accent-firing-orderApr 23, 2009 - Engine Mechanical problem 2001 Hyundai Accent 4 cyl Two Wheel Drive Manual 95000 ... Now I'm trying to figure out how they go back on. How do I find out the Engine Firing Order for my car - Hyundai Accent 2001 1.5L?Which is cylinder 1 - 1.6 Accent - Hyundai Forum: Hyundai ...www.hyundaiperformance.com/.../16837-cylinder-1-1-6-accent.htmlJan 13, 2003 - 3 posts - ‎3 authorsFrom what I read though, the coil pack is configured as 1 4 2 3. I'm assuming the first wire on the coil pack goes to cylinder 1. Can anyone ...

Dec 16, 2015 | Hyundai Cars & Trucks

1 Answer

No start has spark on 1&4 but no spark 2&3 also has code po 335 crank sensor replaced sensor still no start


Hi,if you are geting a spark on one and four then it could be a coil pack as one coil pack will take care of one and four and the other one will take care of 2 and free.
hope this was some help,.
all the best

Apr 30, 2015 | 2004 Hyundai Elantra

1 Answer

Lait start and engine mising when moving the car


more than likely spark plug leads,put new spark plugs first if problem carries on ,change spark plug leads if still persists get coil pack tested

Jan 13, 2014 | 2000 Hyundai Elantra

1 Answer

No Spark


If you have no spark at the plugs, are you getting voltage and a ground signal at the coil when you crank the engine ?

Dec 13, 2012 | 2005 Hyundai Elantra

1 Answer

Replaced spark plugs & wires now vehicle has no spark,help has plenty of fuel can smell it when cranking over,also tried to install new crank sensor,help please.


Hi and welcome to FixYa!

If that's the case then the coil pack can be faulty. If the coil pack is faulty it tends not to give current to the plugs. As a first course of action I strongly suggest that you replace the coil pack. It's located inside the engine at the side where the plug wires are connected. You will need to remove the cap first to gain access to the coil pack.

Hope this helps and thank you for using FixYa! Have a good one!

Mar 08, 2011 | 2002 Hyundai Santa Fe

1 Answer

My 2002 Hyundai Elantra Gt (2.0L)engine runs rough during low speed acceleration, but runs fine at highway speeds. I have changed fuel filter and spark plugs, but after engine is warm it still misfires...


The Hyundai online shop manual and my newly arrived Hyundai shop manual kept pointing to the coil as a possible problem. While preparing to check coil continuity I discovered the pigtail connected to the bottom of one of the coils was loose and the contacts were burned. This is the coil that supplies spark to plugs 1 & 4, the same ones that kept showing up each time the check engine light illuminated. After cleaning the contacts and making sure the pigtail was securely attached to the base of the coil I have had no further problems.

Jun 11, 2009 | Hyundai Motor 2002 Elantra

1 Answer

Engine light is blinking and it runs very rough/low power in gear.


Check the coil pack. Same symptoms on mine. It went at 74,000.
You can get the resistance specs from a shop manual. I have been told the plastic engine cover traps heat and makes short life of the coil pack. I removed the top engin cover, cosmetic only after replacing mine. You will probably need spark plugs also they are probably fowled by now. If you have not changed spark plug wires in awhile in would not hurt.

Apr 22, 2009 | 2001 Hyundai Elantra

3 Answers

2000 elantra misfire code and slow


try spraying some brake clean where intake manifold meets cylinder head and see if engine rpm changes if so chances are the intake gasket is leaking.

Jan 31, 2009 | 2000 Hyundai Elantra

Not finding what you are looking for?
2000 Hyundai Accent Logo

Related Topics:

90 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8270 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...