Question about Mitsubishi Eclipse

1 Answer

My headlights want fit now that i have the front bumper of my drift body kit on what can i do?

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert that has over 500 points.

  • Expert
  • 216 Answers

The bumper kit is designed to be modified, by either cutting or adding to. If you lights don't fit then you will need to modify the bumper kit and remove any materials that are in the way of the headlights.
A cutoff wheel or even a dremel tool can be used, but take you time and measure twice and cut once or you will have to learn how to mix fiberglass to fix you boo boo.

Posted on Jul 29, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

2005 350z headlight upgrade to 08 xenon headlights

Do you know if the 08 bumper even fits?

Jun 17, 2008 | 2005 Nissan 350Z

1 Answer

How to remove a front bumper off a Toyota celica 1996

1. The sides of the bumper are held to the body with a single screw/bolt. Take these out.
2. Open bonnet
3. You will now see several 10mm bolts holding the bumper to the main body. These need to be taken out.
4. The sides (just underneath the headlight) are held in place by white plastic clips. Carefully pull the sides away from the clips.
5. From the front carefully pull the bumper out from the main body.

Sep 14, 2013 | Cars & Trucks

1 Answer

How do I remove xenon headlight unit on bmw e46

Just a thought, behind the front bumper are the securing hardware. Bumper needs to be removed so you can access the fasteners.

May 31, 2010 | 2003 BMW 330

1 Answer

How do i get at the alternator on my vw beetle 1998

We have a 2000 Beetle. You have to remove 4 allan head bolts and remove the throttle body . Remove it from the large hose. This allows you to get to the alternator . Undo 3 bolts on the belt tensioner and remove that. Undo the electrical connections on the alternator. Undo 2 bolts holding the alternator on to the bracket and pry out. Here's where I just about had a meltdown, the alternator won't fit out past the body work. However remove the passenger side headlight. There is a plastic lever you slide all the way up and slide the headlight out. Remove the 3 torx head screws to remove the headlight cup and the alternator will come out no problem through the headlight hole.

Feb 09, 2010 | 1998 Volkswagen Beetle

1 Answer

Removal of front bumper

The bumper is secured using four 13mm nuts.

a) Open the bonnet and look for one 13mm nut on the lower inside of each headlight.
b) Remove the towing eye covers on the lower section of the bumper and you will find one 13mm nut in each.

Hope this helps.

Mar 28, 2009 | 1999 Mercedes-Benz C-Class

2 Answers

Chevrolet Cavalier Bumper

Headlight and parking lights are different

97 cavalier:

2001 cavalier:

Only way it would work is to do the 01 conversion by switching the whole doghouse (fenders, hood, bumper, lights, etc.) It can be done though.

Mar 27, 2009 | 2001 Chevrolet Cavalier

1 Answer

The whole headlight assembly for the right front light is loose and shaking around on my s40, is there a way to repair it without having to go to the dealership or having to remove anything to fix the...

Old body style or new body style?

New body style...there should be a bar type thing that holds it in place.

Old body style, there are two different styles. One where you can take the headlight out without pulling the bumper cover off, and the other where you need to pull the bumper cover off.

Wiggle the assembly around while looking for any areas where screws seem to be missing.

Jul 27, 2008 | 2005 Volvo S40

2 Answers

Can Geo Metro parts be used to fix a Chevrolet Metro?

The hood will be the same, but the bumper will be different: the Geo Metro had its turn signals in the bumper and the Chevy Metro had them in with the headlights. The bumpers also look different, however their mounts may be the same. If your sister wants fer car to look the same you should find a bumper from a 1998-2001 Chevy Metro.

May 15, 2008 | 1998 Chevrolet Metro

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

86 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts


Level 3 Expert

81285 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8841 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides