Question about 2004 Suzuki Forenza

1 Answer

Broken timingbelt damage, and damaged intake and exhaust valves

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 327 Answers

Thats why the dealer recommended service intervals need to be followed its in the owners manual sorry for your loss but its a big one . your best bet is replace the whole motor with a used one there are plenty of places to get one just shop around the junk yards you can call them from home they should be able to locate one for you then find a shop that will install it for you with a new timing belt of course . you could also have someone pull yours apart you will need a new head or rebuilt one new timing belt but you could also find a damaged piston then you will have paid for all that labor for nothing but if you are doing it yourself just tear it apart first and see what is damaged and whats not and go from there . hope this helps

Posted on Jul 29, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi. What happens when timingbelt broke on 2010 Getz meaning will it have damage on the valves? Thank you


it can damage the valves and cause the motor to seize up, timing belt need to be replaced befor 125,000 miles

Dec 03, 2015 | Cars & Trucks

1 Answer

My 1995 fxstsb keeps misfiring on the rear cylinder. I have replaced the coil, plugs, and wires and after about 5 minutes of running good it started misfiring and sputtering again. What else can it be


Hi Anonymous, and the usual suspects are:
1. Spark plugs in bad condition or partially fouled.
2. Spark plug cables in bad condition or leaking.
3. Spark plug gap to close or to wide.
4. Faulty ignition coil, module and or sensor.
5. Battery nearly discharged.
6. Damaged wire or loose connections at battery terminals especially the negative cable at "BOTH" ends, ignition coil, or plug between ignition sensor and module.
7. Intermittent short circuit due to damaged wire insulation.
8. Water or dirt in fuel system, carburetor or filter.
9. Fuel tank vent system plugged or carburetor vent line closed off.
10. Carburetor controls misadjusted.
11. Damaged carburetor or intake seals.
12. Loose or dirty ignition module connector at crankcase.
13. Faulty MAP, CKP, and or CMP sensors.
14. Incorrect valve timing.
15. Weak or broken valve springs.
16. Damage intake or exhaust valve.
For a prime suspect please visit website below.
Good luck and have nice day.
Harley Davidson Wiring Diagrams and Schematics

Mar 31, 2013 | Cars & Trucks

3 Answers

Broken crank shaft the mechanic said he wont be able to know if valves are bent until he puts it back together of course he said the valves are bent. How difficult is it to replace valves?


Find another mechanic. you got ripped off. A broken crank does not mean you cant check the valves. Called a leak down test. This engine should have been replaced. And probably still should. Your talking about a $1500.00 job.

Aug 10, 2011 | 2000 Chrysler Sebring

1 Answer

WE ARE HAVING PROBLEM FINDING DIAGNOSTIC PROCEDURE FOR CADILLAC DIVILLE WITH DTCs P0029,P0047,P0137 and P0107


P0029 - Exhaust Valve Control Solenoid Circuit Range/Performance Bank 2
Causes:
- Dirty engine oil
- Low engine oil level
- Exhaust valve control solenoid circuit open or shorted
- Exhaust valve control solenoid circuit poor electrical connection
- Faulty exhaust valve control solenoid

Solutions:
- Change oil
- Replace exhaust valve control solenoid

P0047 - Turbocharger/Supercharger Boost Control A Circuit Low
This vehicle is not equipped with a turbocharger or supercharger if it is a 1994.

P0137 - o2 Sensor Circuit Low Voltage Bank 1 Sensor 2
Causes:
- Sensor circuit harness or connectors is open or shorted
- Rear heated oxygen sensor Bank 1 may be faulty
- Fuel pressure may be faulty
- Fuel injector may be faulty
- Intake air leaks

Solution:
Replacing the O2 Sensor 2 usually takes care of the problem.

P0107 - Manifold Absolute Pressure/Barometric Pressure Circuit Low Input
Causes:
- Damage harness or connectors
- MAP sensor circuit is open or shorted
- MAP sensor
- Damaged PCM or ECM

Solutions:
- If damage, repair MAP sensor harness or connector
- Replace MAP sensor
- Replace PCM or ECM

Jan 25, 2011 | 1994 Cadillac DeVille

2 Answers

Timing belt broke while driving car what internal damage should i check for before trying to replace belt


I'd recommend doing a web (or dealer) search for your specific engine to see if it's an "interference" engine. An interference engine is one where the intake or exhaust valves could come in contact with the pistons if the timing belt were to break. If your engine is NOT an interference engine, you can start to swap out the timing belt with no worries. If it IS an interference engine, and the timing belt broke while you were driving, there could be a great deal of internal damage. It's hard to estimate what the damage could be... it could range from zero damage (unlikely), to broken valves and pistons. You could do a compression test on each cylinder before replacing the belt.

Good luck.

Jan 18, 2011 | 2002 Kia Rio

1 Answer

My 98 exployer is misfiring on all 6 cycdeers but runs fine after warmed up


Misfires across all 6 cylinders could indicate the following:

lg-br.jpg
Priority Action Part Type Cause 1 Inspect Wireset Worn, Damaged or Faulty Spark Plug Wire(s). 2 Inspect Distributor Cap Loose, Burned or Cracked Distributor Cap. 3 Inspect Distributor Cap and Rotor Kit Loose, Burned or Cracked Distributor Cap and Rotor. 6 Inspect Spark Plug Fouled, Damaged, Broken, or Incorrectly Gapped Spark Plug(s). 7 Inspect Coil - Ignition Faulty Ignition Coil. 8 Inspect Condenser-Ignition Faulty Condenser-Ignition. 9 Inspect Point Set Burned, Worn or Incorrectly Set Ignition Points. 15 Inspect Timing Specification Incorrect Ignition Timing. 19 Inspect Fuel Injector Dirty or Worn Fuel Injectors. 21 Inspect Intake Manifold Gasket Leaking, Worn, or Damaged Intake Manifold Gasket. 22 Inspect Distributor Worn, Damaged or Faulty Distributor. 24 Inspect Valve Burned, Worn, or Sticking Exhaust Valves.

Nov 03, 2010 | 1998 Ford Explorer

1 Answer

How to change timing belt on ford escort 2001


I seriously suggest that you take it to a reputable mechanic, especially if it's already broken. If the intake and exhaust valves are not in the right position when the piston is TDC, it will cause extensive damage.

Apr 02, 2010 | 2001 Ford Escort ZX2

1 Answer

Timingbelt will the moter be damaged if the belt breaks


Depends which engine you have, the 16 valve motors will be damaged, the 8 valve will not.

2aba80a.jpg

Mar 03, 2010 | 1994 Geo Tracker

1 Answer

BENT OR BROKEN VALVE


If you are referring to an intake or exhaust valve, cylinder head must be removed (and likely replaced if valve is broken) Also if that's the case, pistons may be badly damaged and not even worth tearing down. If another valve (tire, egr etc, just remove & replace)

Apr 05, 2009 | 1999 Chrysler 300M

1 Answer

Fuel injector/timingbelt


absolutely nothing at all... if the timing belt wasnt installed properly it would bend valves or run rough.. but NOT have a thing to do with fuel injection system

Nov 28, 2008 | 2002 Mitsubishi Galant

Not finding what you are looking for?
2004 Suzuki Forenza Logo

227 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Boyet Soriano
Boyet Soriano

Level 2 Expert

293 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...