Question about 2000 Toyota Camry

1 Answer

I have a Camry 2000, one brake light stopped working, found the fuse box, but how do I read the abbreviations to find the correct fuse to change? Some fuses are desribed with three letters and I don't know what they mean, don't have manual, got the car used.

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

You could get a test light !
you can use this to test all your fusses!
All the car fusses I have ever seen have a spot at each end where you can poke the tip of a test light in.
Test your fusses without removing them.
If you have power to one side but not the other the fuse is bad.
Wen you find one with no power at all try stepping on the brake peddle .
there might be several with no power unless you have the ignition and everything else turned on.

Posted on Jul 29, 2010

  • hothotdaddy Jul 29, 2010

    You might also try a new bulb in the one not working !



1 Suggested Answer

  • 2 Answers


Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

3 Answers

On the fuse chart, what is the abbreviation for the brake light fuse

Should all be the same fuze. Check the bulbs and whether the harness to the rear lights that usually runs through the trunk hasn't been pulled.

Jun 25, 2014 | 1998 Toyota Camry

1 Answer

Nissan Xterra Brake Light Fuse Location

It's 15A FUSE 39 in the fuse & fusible link box

Mar 25, 2017 | Nissan Xterra Cars & Trucks

1 Answer

Need the map for fuse box on 2000 toyota camry , mine is missing on interio fuse box

That should not have a separate fuse, if the fuse is out so should your running lights. If your running lights are working, check the wires and or bulbs for your license plate lights.

Aug 13, 2012 | 2000 Toyota Camry

1 Answer

Brake lights wont work.

switch under driver side dash faulty on brake pettal

Jan 04, 2009 | 1988 Toyota Camry

1 Answer

Tail lights out

There is another fuse box behind the change holder on the lower left side of the dash. When you open the change holder you will see two "Fingers" one on each side that hold the change box up. Gently squeeze these inward and rotate the change box out. You will find the missing fuses there!

Jul 31, 2008 | 1992 Toyota Camry V6

Not finding what you are looking for?
2000 Toyota Camry Logo

154 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts


Level 3 Expert

85104 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides