Question about 2003 Mercury Grand Marquis
I have a 2006 Mercury Grand Marquis. The problem is the passager and two back seat windows cannot be operated manually from their locations. They can be operated by the driver and they work fine. I have checked the fuses and all check good. At the passager door I do get 12 volts when the child switch is on but still can't operate the window manually. Is there anything else I can check? Or how can I find a schematic for this.
Thanks for any help.
Make sure the main switch is not lock. If it's lock then unlock it. Otherwise other can't open unless the driver.
If It's unlock but still not work. Then possible the main switch is stuck at " Unlock" Position.
Posted on Jun 16, 2017
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 91 mercury grand marquis
first you need to get a flash light go to your pass side look arond the black casing off your heater see if the bottom is wet try with heater on and off usaully when a core is given that much water out when you turn your heater on it will steam your window and you will smell antifreeze if theres any if none of things are present i would check the seal around your windshield around firewall area rain can get into areas that the factory seal might have dried and cracked open leaving you with a wet carpet and a puddle in the back floor pan as for the airbag light you need to have the light reset at a garage could be a stored code in computors memory you can try your self by taking the fuse that says ecm leave out for ten seconds start vehicle see if it reset second way take pos cable off your battery leave off 10 15 seconds reinstall start if light stays out great if not you will need to have reset with scanner like a snapon or rotunda
Posted on Sep 13, 2008
SOURCE: rear seat belt repair on
If simply pulling and releasing them doesn't work.(which i am sure you've already tried a hundred times!) you will have to replace them.Most scrap yards will have them available. and remember the same seat belts are used in a wide variety of models so you don't have to find them from the exact same car.
Posted on Jan 17, 2009
check the relay in the box under the hood and also make sure no one turned the button off to all the window controls on the driverside door panel
Posted on Feb 12, 2009
Go through your fuse box and check for any burned out fuses also they may take a relay which may also be out. You can pick up a HAYNES or other brand repair manual at any auto parts store. Auto Zone sells mainly Haynes books, they will guide you to your repair in a step by step repair. The books are kind of like "repairs for idiots" they are really detailed and easy to follow.
Posted on May 27, 2009
My Cougar is a 99, but the relay on it is between the window motor and the mirror. Held on by 2 screws. It should click when you press the window button. When you take the foam off the door you can see it.
Posted on Jun 30, 2009
Tips for a great answer:
Oct 06, 2016 | 2006 Mercury Grand Marquis
Jan 11, 2016 | 2006 Mercury Grand Marquis
Nov 19, 2014 | 2006 Mercury Grand Marquis
May 12, 2014 | 2005 Mercury Grand Marquis
Mar 19, 2011 | 1996 Mercury Grand Marquis
Jun 16, 2010 | 2006 Mercury Grand Marquis
Jun 15, 2010 | 1993 Mercury Grand Marquis
May 20, 2010 | 1994 Mercury Grand Marquis
Oct 27, 2009 | 2006 Mercury Grand Marquis
61 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: