Question about 2001 Pontiac Grand Am SE

2 Answers

Have a misfire on my #1 cylinder what could be the problem can anyone help?

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 249 Answers

If it's a V6 check the coil towers for rust.. just pop the plug wires off one at a time and check the terminals for corrosion ..It can be cleaned with steel wool .It's harder to clean the contact on the plug wire but it can be done with a little patience. I don't recomend putting any kind of penetrating oil on because the plug wire will want to keep popping off.

Posted on Jul 28, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 10,319 Answers

Bad plug, wire, coil, injector, or computer

Posted on Jul 28, 2010

Testimonial: "very helpful thanks and i'm glad i joined the sight, i did a tune up, new wires, plugs, and i tested the coil so the only thing left is the computer a"

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

#1 cylinder is misfiring, put new fuel ejector and the problem is still there.It has a bad noise in the motor.


Thread: Cylinder 1 misfire P0301 - The Chrysler Minivan Fan Club ...

forum.chryslerminivan.net/showthread.../27978-Cylinder-1-misfire-P03...

Feb 6, 2013 - 7 posts - ‎4 authors
My mother-in-law's 2002 Town and Country has the P0301 cylinder 1 misfire error code. I haven't done much work on this type of car, so I'm not ... '05 Town & Country Cylinder 1 misfire mystery
10 posts
Feb 3, 2014
Engine misfire
7 posts
May 6, 2012
#1 Cylinder misfires at idle only
10 posts
Jun 4, 2011
Running rich / Misfire Mystery
10 posts
Sep 20, 2010
More results from forum.chryslerminivan.net

Part 1 -How to Test the Coil Pack (2001-2008 Chrysler 3.3L ...

easyautodiagnostics.com > Chrysler > 3.3L, 3.8L
Apr 29, 2011 - Page 1 of 7: How to Test the Coil Pack (2001-2008 Chrysler 3.3L, 3.8L). ... This article will help you troubleshoot a Misfire Condition that might be setting ...your 2001-2009 Chrysler (or Dodge) 3.3L or 3.8L Town and Country, Voyager, ... it's important the you know what 'Paired Cylinders' and 'Non-Paired ...

Jan 03, 2016 | 2001 Chrysler Town & Country

1 Answer

Check engine light code p2196,p2197, po300 ,304,305,306,p2 ,Im freeking out.


P0300 Random/Multiple Cylinder Misfire Detected P0301 Cylinder 1 Misfire Detected P0302 Cylinder 2 Misfire Detected P0303 Cylinder 3 Misfire Detected P0304 Cylinder 4 Misfire Detected P0305 Cylinder 5 Misfire Detected P0306 Cylinder 6 Misfire Detected P0307 Cylinder 7 Misfire Detected P0308 Cylinder 8 Misfire Detected P0309 Cylinder 9 Misfire Detected P0310 Cylinder 10 Misfire Detected P0311 Cylinder 11 Misfire Detected P0312 Cylinder 12 Misfire Detected P0313 Misfire Detected with Low Fuel P0314 Single Cylinder Misfire (Cylinder not Specified) P0315 Crankshaft Position System Variation Not Learned P0316 Misfire Detected On Startup (First 1000 Revolutions)

Read more at: http://www.obd-codes.com/trouble_codes/
Copyright © OBD-Codes.com
-----------------------------------------------------------------------
P2195 O2 Sensor Signal Stuck Lean Bank1 Sensor 1 P2196 O2 Sensor Signal Stuck Rich Bank1 Sensor 1 P2197 O2 Sensor Signal Stuck Lean Bank2 Sensor 1 P2198 O2 Sensor Signal Stuck Rich Bank2 Sensor 1

Read more at: http://www.obd-codes.com/trouble_codes/
Copyright © OBD-Codes.com http://www.obd-codes.com/p0002

May 07, 2015 | 2006 Ford Taurus SEL

1 Answer

I got check engine codes P0300,P0301,P0304 on my 2003 Volkswagen Jetta!!!


check the cylinder pressure usely its 75 low or higher .

Aug 09, 2012 | Cars & Trucks

2 Answers

CODE 003: 00772 P0303 Cylinder 4: misfire detected


Hi double check the code which came up, as P0303 is no.3 cylinder misfire.
Anyway this could be as simple as the spark plug . But is usually the coil.
I hope i have been of some help to you
John (South Wales uk )

Apr 24, 2011 | Volkswagen Passat Cars & Trucks

1 Answer

Check Engine Light coming on


get the soft ware up grade. and have the coils checked.

Mar 03, 2010 | 2002 BMW Z3

4 Answers

5.3 L Missing and Rough Idle Intermittently


i have a 2001 chevy z-71 5.3L. I keep getting a random/multiple misfire code for cylinder 1 . I have replaced plugs, wires, coil pack(only on #1 cylinder)., and fuel pump. I still keep getting the cylinder 1 misfire code. I put truck on a scanner and watched the cylinders. # 1 misfires at idle but quickly stops misfiring at around 1000 rpms. you can here the engine miss at idle but truck runs great on road . anyone else ever had this problem?

May 05, 2009 | 1999 Chevrolet Silverado 1500

1 Answer

Codes anyone help me???


You must first rule out a couple of things. First make sure there is spark going to the cylinder that is misfiring. If not you might have to replace the coil pack located at the back of the engine. Next you must rule out a bad fuel injector to that cylinder. Make sure you are getting spark to the fule injector. Next there could be a bad wire or bad plug. I know because I replaced all three till I got to the coil pack.

May 04, 2009 | 2001 Ford Windstar

2 Answers

Check Engine Light is on and the code is P0303


Hello I need a help.
I have 1999 lincoln town car 4.6L V8.They have check engine light on. P 0303 cylinder 3 missfire.
I was changed spark plugs,fuel filter. check compression test 150psi. fuel pressuer 50.
swiching cylinder 1 to 3 fuel injector and coil. but they still have engine code

Feb 27, 2009 | 1999 Lincoln Town Car

2 Answers

Need know which cylinder is number one on 2000 ford windstar 3.8


#1 plug is the 1st plug on passenger side by firewall

Nov 15, 2008 | 2000 Ford Windstar

Not finding what you are looking for?
2001 Pontiac Grand Am SE Logo

Related Topics:

143 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...