Question about 1999 Jeep Cherokee
The Driver Door Module (DDM) contains the master switches and the lockout switch in the power window system. The DDM also contains an integrated circuit to support the one-touch down feature of the driver side front door power window. Remember that the passenger side front door power window switch and, on four-door models, the rear door power window switches get their battery current through the power window lockout switch in the Driver Door Module (DDM). In addition, each individual power window switch gets its ground through the master switch in the DDM.
The one-touch down feature circuitry within the DDM will not operate the power window motor if the door glass, window reregulator or gearbox mechanism are stuck, obstructed, or binding. If the driver side front door power window operates as designed, but the one-touch down feature is inoperative, replace the faulty DDM.
If the problem being diagnosed is an inoperative power window switch illumination lamp, but the power window switch operates as designed, replace the faulty door module.
The procedure to remove the switch is simple.
Posted on Jul 29, 2010
Please check the bellow links….
Let us know if you have something more to know else accept the suggestion.
Thank You for contacting Fixya.com
Posted on Jul 28, 2010
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Jul 29, 2014 | 1999 Jeep Cherokee 4WD
Nov 07, 2017 | 1999 Jeep Grand Cherokee
May 27, 2010 | 1999 Jeep Grand Cherokee
Sep 06, 2017 | 1999 Jeep Grand Cherokee
Sep 10, 2009 | 1999 Jeep Grand Cherokee
May 30, 2009 | 1999 Jeep Grand Cherokee
Dec 22, 2008 | 1999 Jeep Grand Cherokee
1,046 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: